Renewal of Bituminous Road Work of Bansi Branch Between km 22.650 to 23.850

Amount

Earth work in cutting in embankment in ordinary soil (Loam,Clay or sand) excavation to be in the form of pit not exceeding 50 cm in depth and earth work in embankment to be in 20 cm layers, including the ramming & dressing the surface to required levels and slops and also including 1.50 meter lift and 30meter lead. the earth from cutting to be used in making embankment or to be deposited as spoil bank within 30m distance as direction by the Engineer incharge. Excluding royality

Providing ,Laying ,spreading and compacting stone aggregates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening,binding materials to fill up theinterstices of coarse aggregate ,watering and compacting to the required density grading 3 as per Technical specification clause 405

Providing and applying tack coat with Bitumen grade using bitumen pressure distributor at the rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & Cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing laying & rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line ,grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant laying and rolling with a three wheel 80-100 KN static roller capacity finished to required level and grades to be followed by manual MORD Specificiations 508

Providing and laying seal coat by Manual means with Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510.

BALENDRA SINGH

M/S OM PRAKASH

SANJEEV KUMAR PANDEY

M/S JEET CONSTRUCTION