R and M of Control Room and Residential Buildings at 132 kV GSS, Baroli

Part-A: Building Works PWD Rajasthan Integrated Building BSR 2026

(B-195/12.43.2) Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision. Old work.

(B-194/12.37.2.B) Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: Old work (one or more coats) including scrapping surface and necessary repairs. Same colour.

(B-196/12.46.2) Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: One or more coats on old work.

(B-204/13.29) Repair to damaged RCC slabs, beams and columns etc for strengtheing with cement mortar 1 : 2 in following steps: (i) Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. (ii) Applying Epoxy primer on the exposed steel bars. (iii) Applying Epoxy hardener and resin mix (as per manufectured's specification) on concrete and steel bars with brush. (iv) Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. (v) Plastering the surface with CSM 1:3 upto depth of 30mm complete. (vi) Cure the plastered surface for 15 days.

(B-2013/13.1) Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead With cement mortar 1:4 ( 1 cement : 4 coarse sand).

(B-263/17.35) Providing and fixing chicken wire mesh at the joint of masonry members/ R.C.C. Members with Nails complete in all respect.

(B-207/14.3) Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-incharge.

(B-113/6.18) Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4: Upto 15 cm. thick.

(B-145/9.2) Structural steel work riveted, bolted or welded in built up sections,trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete.