REPAIRS TO KITCHEN TOILETS CLEANING OF WATER TANKS INTERNAL WATER SUPPLY SANITORY FITTINGS AND ALLIED WORKS AT AUNDH MIL STN UNDER GE MH AND RH KIRKEE

Amount

Taking down cement or cement lime plaster of any description all as specified and directed .

M& L for rendering of external surface 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including uprooting/cutting of vegetation growth (maximum height upto three stories) using WPC @ 3% by weight of cement all as specified and directed (Note: WPC will be measured and paid seperately)

Supply only intergral water proofing compound.

M & L applying two coats of cement base paint to newly plastered surface of wall including preparation.

M & L for washing rubbing and stopping colourd old surface upto any height, by scraping down with steel wire brushes of smoke spots, moulds, efflorescent salts and cutting/uprooting vegetations growth, including filling of spots with POP and applying of two coat of cement base paint all as specified and directed.

M&L for rendering of internal surfaces 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement ) all as specified and directed.

M&L for of preparation of newly plastered surfaces of wall and applying two coats fof oil bound distemper over a coat of alkali resistant primer over 3mm thick wall care putty finished even and smooth, all as speciified and directed

M&L for complete removal of existing finishes by scraping down old decorative surface of walls with steel wire brushes of smoke spots, moulds, efflorescent salts including filling of spots with POP and applying two coats of white wash on old surfaces of walls all as specified and directed.

M&L for providing water proofing plaster at the junction of wall and slab at chajjas , lintels, etc of average thickness 20mm in CM (1:3) with water proofing compound , finished even and smooth without using extra cement all as specified and directed. Note :- Rates shall deemed to be inclusive of Cost of water proofing compound.

M&L for rendering 10 mm thick on concrete surface in CM 1 :4 as in ceiling etc. all as specified and directed.

M&L for preparation of new plastered surface and for applying three coats of white wash on ceiling all as specified and directed.

M&L preparation of old surfaces applying of one coat of white wash on ceiling all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding/complete and removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) all as specified and directed

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

Ditto all as per item No 17, above but as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:4, set and jointed in neat white or coloured cement to match the surfaces of tiles all as specified and directed.

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

M&L glazed ceramic tiles (350x250x7mm or 450x300x7mm) colour tiles on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm thick rendering in CM 1:4, all as specified and directed.

M&L glazed ceramic tiles in vertical surface 300 x 200 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the work over 10 mm rendering in CM 1:4, all as specified and directed.

M&L for 25mm thick, levelling course of cement concrete type B-0 , 1:2:4 (12.5mm graded aggregate) as in flooring for laying tiles all as specified and directed.

M&L for PCC 1:3:6 type C-2 , 75 mm thick as in plinth protection, construction joint after every 2 mtr interval and from wall will be filled by mastic of bitumin/Compound grade 'A' all as specified and directed.

M& for Forming Contraction (Dummy) joints 75 mm deep x 10mm wide, filled with sealing compound complete all as specified and directed by EIC.

Demolition of Stone slabs and tiles of any description or thickness laided bedded and pointed in cement mortar in floors, aprons etc.

M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid or without and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed.

M&L 25mm Granite (of any type) work (table rubbed and polished) in steps, jambs, cills, for counter tops and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 20mm Screed bed in CM 1:4, all as specified and directed.

Demolition of brickwork or stone work/boulder masonary built in cement mortar or cement lime mortar all as specified

M&L for precast cement concrete, type C-1, 1:3:6 (20mm graded aggregate ) masonary with solid blocks, exc , 10cm in width and setting in cement mortar (1:6) complete all as specified and directed.

S&F in repair sheet glass 3.0mm thick, ordinary quallity and glazing with oil putty in square n.exc 0.5 sq.m in each pane including hacking out old broken glasses any thickness, size quality and description all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store, all as specified and directed.

S & F 15 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, all as specified and directed.

All as per item No 30, above but re-fixing only with new fittings where requied all as specified and directed.

Cutting chases, pinning in brick walls, making good to facing where required and pointing in cement mortar (1:3) and making good , cutting n.exc 10cm girth , all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections and S&F 20mm bore tubes, medium grade, galvanised , with all fitting & fixed complete to walls & ceilings or laid in floors all as specified and directed

S & F 20 mm bore tubes, medium grade, galvanised, with all fitting & fixed complete to walls & ceiling or laid in floors, all as specified and directed.

All as per item No 34, here-in-before but re-fixing only tubes of 20mm bore, all as specified and directed.

Supply & fixed in repairs 15mm bore fancy type bib taps, cast copper alloy, with capstan heads,chromium plated , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make : Jaguar or equivalent)

S&F in repair bib cock with nozzle fit for washing machine pipes screwed for 15mm dia at one end complete of Make :ESSCO/Parko/Cera

S&F in repairs two way bib tap 15mm chromium plated Cat No CON-041 KN of M/s Jaquar/Cera CI206/ F330004 of Hindware

Supply & fixed in repairs 15mm bore Stop valves, cast copper alloy, fency type, chromium plated with long or short shank and cup ( concealed type) screwed down high pressure , screwed both ends for iron pipe or for unions.

Supply & fixed in repairs 15mm bore angular Stop valves, cast copper alloy, fency type, chromium plated with long or short shank and cup ( concealed type) screwed down high pressure , screwed both ends for iron pipe or for unions.

S&F in repairs , CP brass , chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed.

S&F in repairs 15mm dia pillar taps, CP brass, chromium plated with capstan heads chromiun plated screwed down high pressurewith hot &cold with long screwed shanks and fly nuts, all as specified and directed. (Make : Jaguar, CAT Part No con -011KN or equivalent)

S&F in repairs 15mm bore CP Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses fittings complete all as specified and directed ( Make : Jaguar Cat Part No CON-167KNB Hindware F280009CP /Cera F2002461)

S&F in repairs Health faucet brass chromium plated with 8mm Dia, 1 Meter Long Flexible Tube chromium finish spring type & Wall Hook fixing to 15 mm bore of pipe all as specified and directed. (Make - Jaguar/Cera /Hindware)

S&F in repairs 15mm Brass CP wall mixer tap including provision for overhead shower for mixing " Hot or Cold" water screwed down for iron pipe all as directed (Make : Jaguar, CAT Part No FUS- 29273UPR F1014402 of Cera/ F 110018 of Hindware)

S&F in repairs Sink Mixer with Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges Make: Jaguar/Cera/Kerovit

S&F in repair toilet paper roll holder, Cat No 1151 N of M/s Jaquar/ F5002110 of Cera/F880003CP of Hindware complete all as specified and directed.

S&F in repairs rotational moulded PVC water storage tank 500ltrs capacity conforming to IS-12701(1989) cylindrical vertical type multi-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I (Make:SINTEX/POLYCON)(Rates includes for removing old water tank of any description).

All asper iem No 48 but 1000ltrs capacity.

All asper iem No 48 but 2000ltrs capacity.

S/F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long all as specified and directed.

S&F in repairs Corner glass shelf with 200mm dia or above with stainless steel hinges and chromium finish holders/wall of approved make complete all as specified and directed by EIC

S&F in repairs Towel Ring (of approved pattern) complete all as specified and directed.

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. (Make : CERA, Hindware or Equivalent )

S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc, including trap set in and including concrete complete including making good to floor all as spfd and directed.

S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts, all as specified and directed.

S&F in repairs vitreous china wash hand basin white size 550x450mm flat back size 550x400mm excluding taps waste chain and plug and porcelain stopper but including brackets cutting for pinning in ends of brackets of erecting stand but exclusive of fixing of supply and waste pipe all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, seat cover complete , all as specified and directed.

S&F in repair Vitreous China wash down water semi pedestal pattern (Anglo indian pattern) white (excluding fixing bolts flushing cistern) including flush pipe, seat cover suitable and connection to drain (or outgoing pipe) flushing pipe, anti-syphonage pipe complete , all as specified and directed.

S & F in repairs Plastic seat cover to EWC with aluminium hinging device all as specified and directed.

S & F in repairs Plastic seat cover suitable for anglo indian EWC with hinging device all as specified and directed.

S&F in repair toilet paper holder brass chromium plated fixed to wall with brass screw complete (Make :- Cat No AHS-1551 Make JAQUAR/F870008CP hindware/ F50001109 Cera ).

Supply and fixing in repairs CP soap dish holder complete all as specified and directed. (Make:- Cat No CAN-CHR-1131N Jaguar/F-870004CP Hindware).

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including cantilever brackets, CP waste coupling and PVC waste pipe overall size of sink 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

All as per item No 64 above but size 495mm x 420mm bowl size 410mm x 330mm x 160mm and without drainage board complete all as specified and directed. ( Make : Anjali/Nirali or equivalaent approved quality)

S&F in repair plate rack made of stainless steel 1mm thick and overall size 915mm x915mm x 255mm, inlcuding taking down old /unsv complete all as specified and directed.

all as per item No 69 above but size 750mmx600mmx250mm complete all as specified and directed.

S & F in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Disconnecting existing tanks setting aside for cleaning and cleaning of Serviceable PVC water tanks exc 250ltrs and n.exc 500ltrs, removing all scales and dirt etc from tank and from mouth of circulating pipes etc duly taking down the existing service tank and re-fixing the same in its position complete all as specified and as directed.

All as per item No 70 above but water tanks exc 500ltrs and n.exc 1000ltrs complete all as specified and as directed.

All as per item No 70 above but water tanks exc 1000ltrs and n.exc 2000ltrs complete all as specified and as directed.

S&F in repairs 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms)

All as per item No 73 but Fixing only complete all as specified and as directed.

S&F in repairs 25mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms)

S&F in repairs PVC (SWR) bends any radius bore of 75 mm all as specified and directed.

All as per items No 76 here in before but 110mm bore etc all as specified and directed.

S&F in repairs PVC (SWR) pipes 75 mm dia single sockets, in any length rubber ring joints, laid in trenches or in floor all as specified and directed.

All as per items No 78 here in before but 110mm bore etc all as specified and directed.

All as per items No 78 here in before but fixed to walls etc all as specified and directed.

S&F in repairs PVC (SWR) branch 75 mm bore piecs, single ( single Y ) equal or unequal all as specified and directed.

All as per items No 81 here in before but 110mm bore etc all as specified and directed.

S&F in repairs PVC (SWR) junction 75mm bore single ( single t) equal or unequal all as specified and directed.

All as per items No 83 here in before but 110mm bore etc all as specified and directed.

S&F in repair grating square or rectangular 150mm size of PTMT (minimum weight 100 gms) all as specified and directed.

S&F in repairs kitchen sink coupling complete all as specified and directed

S&F in repairs PVC waste outlet pipe for kitchen sink complete all as specified and directed.

S&F in repairs PVC waste outlet pipe for 32/40mm dia WHB complete all as specified and directed

S&F in repairs Cast iron soil 100 mm bore , waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors

S&F in repairs Cast iron floor trap 100 mm bore with grating including jointing to waste pipe and fixed with PCC 1:2:4 , all as specified and directed.

M&L for waterproofing treatment to RCC sunken slab as specified below. Make: PIDILITE or equivalent:- (a) creating fillet coving of 50mmX50mm with polymer modified mortar using cement : sand : URP. (b) Applying PU sealant at the junction of pipes and the RCC sueface. (c) Apply1st coat of two component cementitious coating, over the surface and taking the coating on the walls over the angle fillet / watta portion. (d) Lay 40gsm geotextile fleece at the watta portion. (e) Apply 2nd coat of two component cementitious coating, over the first coat and taking the coating on the walls over the angle fillet / watta upto 1M after 6 -8 Hrs. (f) Applying 12mm thick plaster in C:M 1:3 with waterproofing compound conforming to IS 2645:2003 @ 250ml per bag of cement.

M & L PCC (1:5:10) using 40mm graded aggregate as in mass concrete or as in sunken floor complete all as specified & directed

M&L for removing peepul trees or any type of trees/vegetations with root from wall, roof slab, over head tank portions, shafts, rain water pipe portions etc, and applying suitable chemical to the affected area to arrest further growth and making good damaged portions with PCC 1:2:4 all as directed. Note : Safety precautions like rope, safety belts, helmets , ladder etc shall be responsibility of contractor

Dismantling of structural steel work including doors, gates but excluding framed truss etc.

S&F in repair mild steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engineer in Charge.

S&F in repairs vitreous china wash hand basin white size 460x342/560x450mm or above miniumum depth 155mm or above under counter oval type including flexible waste pipe and waste coupling making good as specified and directed.

S&F in repairs Steel jet spray including pipe (Make : Prayag/Shakti or quivalent), all as specified and directed.

S&F in repair PVC water tank cover with fitting suitable for tank of capacity of 500 liters etc including device complete.

S&F in repair PVC water tank cover with fitting suitable for tank of capacity of 500 to 1000 liters etc including device complete.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

S&F in repair of vitreous china bowl type urinal flat back size 465 x 355 x 265 mm white with grating and union for discharge including flush pipe complete all as specified and directed.

L.K.R.TIWARI CONSTRUCTION

ANJALI CONSTRUCTIONS

Shri Sant Cosntruction

M/s KAILASH CHANDRA