GE 861 EWS-71/2024-25

Amount

Dismantling of CGI/PGI Sheets fixed with screws as in roof covering complete all as specified and directed by Engineer-in-Charge.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ Cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

M&L pre-painted galvalume aluminium zinc coating GI based plain steel sheets 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/Cladding to wall, Ridge and eaves board, fixed with self tapping screws as in specified complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames exceeding 1.5 Sqm and not exceeding 4.00 Sqm each (Without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed by Engineer-in-Charge.

S&F second class hard wood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed by Engineer-in-Charge.

S&F 30mm thick 2nd class HW plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkhats complete all as specified and directed by Engineer-in-Charge.

S&F 35mm thick Second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.(without sash bars),edges of framing plain,chamfered or rounde, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part-I, section 8, clause 8.24 (a); supplied and fitted to chowkhats but divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers complete all as specified and directed by Engineer-in-Charge.

S&F 30 mm thick glazed and skeleton window shutters, open rebated divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkhats complete all as specified and directed by Engineer-in-Charge.

S&F mild steel flat iron 25x6mm as in hold fasts including all necessary cutting etc complete all as specified and directed by Engineer-in-Charge.

M&L PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in bed blocks for fixing of hold fasts etc. complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm long medium weight, cold rolled mild steel butt hinges complete all as specified and directed by Engineer-in-Charge.

S&F 75 mm long medium weight, cold rolled mild steel butt hinges complete all as specified and directed by Engineer-in-Charge.

S&F 150mm mild steel barrel tower bolts, stove enamelled black with bright bolt and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 150 mm long cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed by Engineer-in-Charge.

S&F 100mm mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm long cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed by Engineer-in-Charge.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed by Engineer-in-Charge.

S&F 300 mm mild steel ordinary rat rail rod pattern spring including roller and plate complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces over 10cm width or girth including preparation of new surfaces complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 300 mm mild steel ordinary rat rail rod pattern spring including roller and plate complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (Un-reinforced) in ground floors and pavings n exc 15 cm thick below or above ground level complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.5mm graded crushed stone aggregate) complete all as specified and directed by Engineer-in-Charge.

M&L for vitrified Ceramic (Light Shade) tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for non skid joints free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for non skid joints free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for coloured glazed ceramic tiles in vertical surfaces 450x350x7mm thick set over and including 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick PCC 1:3:6 Type C-2 (using 40 mm graded crushed stone aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed by Engineer-in-Charge.

M&L coloured chequered cement concrete tiles glossy finish 30cm x 30cm x 25 mm thick, with grey cement & pigments set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast concrete inter locking paver blocks (shape as per sample in AGE B/R (P) sample room), with grey cement and pigment and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast concrete inter locking paver block (shape as per sample kept in AGE B/R (P) sample room), with grey cement and pigment and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in copings including necessary form work, complete all as specified and directed by Engineer-in-Charge.

M&L for machine cut Kota stone slab flooring 20-25mm thick over and including 20mm cement screed base of cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillars, laid over and including 15mm thick rendering cement mortar 1:4 and jointed with grey slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards /slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame complete all as specified and directed by Engineer-in-Charge.

M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in wall with nails to timber frame complete all as specified and directed by Engineer-in-Charge.

Dismantling of framed timber scantlings under 40 Sqcm in section, fixed in any position complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class soft wood (Kail) in scantlings over 40sqcm in section clean sawn and fixed complete all as specified and directed by Engineer-in-Charge.

Dismantling of unframed timber scantlings under 40 Sqcm in section, fixed in any position in fillet rails, posts rafters purlin etc complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails exc 3 Sqcm and n exc 6 Sqcm bull, splayed, chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails n exc 3 Sqcm bull, splayed, chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted plastered or unplastered surfaces of wall and applying two coats of white wash complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new surfaces of walls and applying three coats of white wash complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china wash down water closet (Pedestal pattern), white (EWC) including seat cover with brass screws but excluding flush pipe and flushing cistern complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china wash basins, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC Low level flushing cistern 10 Ltr capacity including all fittings such as flush pipe brackets complete all as specified and directed by Engineer-in-Charge.

S&F in repairs brass chromium plated mixer for mixing hot & cold water screwed down for 15mm iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm Bib Taps with wall flange of chromium plated fancy type long shank screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stop valves/angle valves for 15 mm bore of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm bore fancy type pillar taps, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted steel surfaces of any description over 10cm in width or girth, not otherwise described and applying a coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint to match the existing surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for sand filling under floor including watering and consolidation complete all as specified and directed by Engineer-in-Charge.

M/S Manzoor and Co (BID ID -3181885)

M/S SMA and SONS CONSTRUCTIONS (BID ID -3184587)

M/S GASSI CONSTRUCTION AND CO (BID ID -3184102)

JANDOO AND CO (BID ID -3184532)

M/S SHEIKH FEROOZ AHMAD (BID ID -3184539)

M/S BASHIR AHMAD AND SONS (BID ID -3176740)