Karnataka

Active

Works

Other Works

Additional Works to ongoing BWCC Building at 10Th Cross Parsi Garden in Ward no.51(57) Rajmahal Nagar

Bengaluru West City Corporation

BWCC Malleshwaram Division | bangalore, Karnataka

Amount: Refer DocsCloses: 2 Jul 20266d left

Tender Value

Refer Docs

EMD Value

₹3.1 L

Closing Date

2 Jul 2026, 10:11 pm6d left

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Bengaluru West City Corporation

Work Description

Additional Works to ongoing BWCC Building at 10Th Cross Parsi Garden in Ward no.51(57) Rajmahal Nagar

Tender Information

Tender ID

308699

Reference Number

BWCC/2026-27/OW/WORK_INDENT489

Tender Type

Open

Product Category

Other Works

Location

BWCC Malleshwaram Division

Source Website

Subscribe to view

Documents Required

8 documents required · 6 mandatory · 2 optional

Technical Bid

OptionalAnnual Turnover Certificate

OptionalCompany Registration Certificate

RequiredWork Done Certificate

RequiredPAN GST CERTIFICATE

RequiredAddress with Phone No

RequiredExisting commitments and on-going works

RequiredAssessed available tender capacity

RequiredLINE OF CREDIT

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

ALL OTHER TERMS AND CONDITIONS AS PER KW Standard TENDER DOCUMENT

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs .411.00Lakhs.

Others -- Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs .411.00Lakhs

Capabilities of Vendor

Mandating satisfactorily completion as a prime contractor, at least one work to as extent of 80% of the cost of the work ( Rs.153.00 Lakhs)

Work Done Certificate

Financial Status

executed in any one year, the following minimum quantities of work

Others -- executed in any one year, the following minimum quantities of work

Others

Liquid assets and /or availability of credit facilities of not less than Rs:61.79 Lakhs(Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc.

Line of Credit

Assessed available tender capacity

Others -- Assessed available tender capacity

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹3.1 L

Important Dates

Last Activity

22 Jun 2026

Published

22 Jun 2026

Bid Opening

3 Jul 2026

Download Ends

30 Jun 2026

Pre-Bid Meeting

30 Jun 2026

BOQ Preview

•

Additional Works to ongoing BWCC Building at 10Th Cross Parsi Garden in Ward no.51(57) Rajmahal Nagar

•

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rowsof scaffolding in stepped ...

•

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m he...

•

Ground Floor Slab

•

First Floor Column

•

Providing and constructing load bearing wall with Solid Concrete blocksof size 400x200x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185...

•

Providing and constructing load bearing wall with Solid Concrete blocksof size 400x100x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS2185...

•

Providing and fixing suitable plaster mesh 100mm wide manufacturedout of hot dipped galvanised iron of nominal thickness 0.35mm with azinc coating of 120g/m2 width, along route of walls chipped for se...

•

Extra for providing and mixing water proofing material in cement plasterwork in proportion recommended by the manufacturers including cost ofmaterial etc as per specifications and as per directions of...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth renderin...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thickcement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and atop layer 6 mm thick cement plaster with cement mortar 1:3 (1 c...

•

Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners wherever required sm...

•

Formwork For Staging Beyond 5 m upto 10 m add 12% extra on formwork for staging & basepreparation Stilt Floor - GF to FF

•

First Floor- FF to SF

•

Providing Honne wood frames of doors, windows, clerestory windows,ventilators and other frames, wrought, framed or assembled includingmaking plaster groves (excluding cost of cement concrete and side ...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensi...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

•

Forming groove of uniform size in the top layer of plaster as per approvedpattern including repair to the edges of panels and finishing the groovecomplete as per specifications and direction of the En...

•

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinderof 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slopecompacting, including cost of materials, labour, curin...

•

Grouting the joints of flooring tiles having joints of 3 mm width, usingepoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10kg of hardener and 0.20 kg of resin per kg), including...

•

Providing and laying Chequerred precast cement concrete tiles 22 mmthick in footpath & courtyard, jointed with neat cement slurry mixed withpigment to match the shade of tiles, including rubbing and c...

•

Providing and laying Polished Glazed Vitrified tiles with thickness 10mm in floor with different sizes with water absorption less than 0.08%and conforming to IS:15622, of approved brand & manufacturer...

•

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approvedmake in all colours, shades except burgundy, bottle gree...

•

Supplying heavy gauge PVC conduit pipe ...... mmdia..........mm thick confirming to IS 2509 with suitable sizebends, metal/PVC Junction boxes, adhesive paste etc., andrunning before concreting the sla...

•

Supplying and fixing PVC/metal conduit Deep junction box Stilt Floor

•

Extra for Groove cutting in brick wall/CC floor to the suitabledepth for concealing of Conduit/GI pipe and plastering,finishing upto wall surface complete. upto 50 mm conduit in brick wall

•

Concealed Conduit System Supplying heavy gauge PVC Conduit Pipe .... dia ....... mmthick with suitable size bends, metal junction boxes adhesivepaste etc., by groove cutting in the wall and fixing by ...

•

Open Conduit System Supplying heavy gauge PVC conduit pipe ....... dia ....... mmthick confirming to IS 2509 with suitable size bends, junctionboxes, adhesive paste etc , and fixing using inverted woo...

•

Wiring for lighting/power circuit using one of FRLS PVCinsulated 1100V grade, multistrand copper wire with lowconductor resistance single core in open or concealed system ofwiring with specified IS-69...

•

Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5mm2(Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multistrand PVC insulated copper wire (con...

•

Supplying and fixing sheet Metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc. 75 x 75 x 65 mm

•

Supplying and fixing sheet Metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc.100 x 75 x 65 mm

•

Supplying and fixing sheet Metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc.135 x 75 x 65 mm

•

Supplying and fixing sheet Metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc.180 x 90 x 65 mm

•

Supplying and fixing sheet Metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc.200 x 90 x 65 mm

•

Supplying and fixing sheet Metal box made out of 18 SWGsheet metal with necessary holes for cable/conduit entry asrequired with one coat of primer of approved make etc.200 x 200 x 65 mm

•