GEK-22/2021-22

Amount

Schedule 'A' Section - I

Taking down carefully aluminium/ copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator, ceiling rose etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

M & L for point wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing sunken boxes for mounting of switch, socket etc incl taking down unsv if reqd complete all as specified and directed for the following :-

One Light/Fan/Bell point controlled by one, one way switch 6 Amp complete.

One switch socket outlet 3 pin, 5 Amp on the independed board.

One switch socket outlet 3 pin, 5 Amp on same board.

All as per item No 2.00 but point wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 Sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly for one 16 Amps socket (Power) point independent including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, socket etc incl taking down unsv if reqd complete all as specified and directed.

M & L in replacement sub main wiring with single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces etc after incl down unsv if reqd all as specified and directed.

S & F in replacement switch piano flush button single pole one way, 6 Amps, 240 Volt incl taking down unsv complete all as per specified and directed.

S & F in replacement bell push piano flush type 6 amps , 240V incl taking down unsv complete all as per specified and directed.

S & F in replacement buzzer ding dong, AC 230 volts Single Phase incl taking down unsv complete all as per specified and directed.

S & F in replacement socket outlet 2-in-1 5 pin, 6 Amps flush type complete all as specified and as directed.

S&F in replacement switch piano flush button single pole one way, 16 Amps, 230/240 V incl taking down unsv complete all as specifed and directed.

S&F in replacement socket outlet 2-in-1 5 pin, 6 & 16 Amps flush type incl taking down unsv complete all as specified and as directed.

S & F in replacemnt ceiling rose surface, backelite, three terminal, 240 volts incl taking down unsv complete all as specified and directed.

S & F in replacement lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings incl taking down unsv complete all as specified and as directed.

S&F LED Tube light fitting, 20 watt, CDL, 230 Volts, 4 feet long, complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp with 100 lumen/watt incl taking down unsv complete all as specified and directed.

S&F Wall mounted Mirror light LED fitting self ballasted LED Batten, Extruded thermoplastic body with PC diffuser in unique square shape, 12 Watt, 2 Feet long, CCT 6500K incl dismantling taking down unsv fitting any type complete all as specified and directed.

Supply & fixing surface mounted LED Bulk head fittings (indoor/outdoor type) 10W luminaire with ABS body & polycarbonate diffuser incl lamp incl taking down unsv complete all as per specified and directed.

S&F self ballasted LED Retrofit Bulb 5 Star Bulbs 9 Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed.

S&F self ballasted LED Retrofit Bulb 5 Star Bulbs 12 Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed.

S&F Recess mounting ceiling fitting 2'X2' LED 36 Watt light Edgelit slim panel having white powder coated extruded aluminium body with high quality LPG and PMMA diffuser. Separate HPF driver. Suitable for Armstrong and Grid ceiling, PF min 0.95 complete incl dismantling taking out unsv one of any make/ size complete all as specified and as directed.

Supply and fixing building security LED light 25 Watt energy saving LED ASTRA NEO street light made up of pressure dia cast housing with toughened glass and high power LEDs with option of secondary optic with IP66 protection, efficacy : 110LM/W after dismantling taking down unsv one all as specified and directed.

S&F MCB DB TPN 4 way double door, IP 43, CRCA sheet powder coated vertical type factory made suitable for incorporating MCB as out going and MCCB as incoming including connecting incoming and outgoing cables & blaking plate as required incl taking down existing unsv DB of any size and making good distrubed surface to match with existing complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB DB SPN 4 way double door, IP 43, CRCA sheet powder coated, factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables & blaking plate as required including taking out existing unserviceable DB of any size and making good disturbed surface to match with existing incl taking down unsv complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB DB SPN 8 way double door, IP 43, CRCA sheet powder coated factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables & blaking plate as required incl taking out existing unsv DB of any size and making good disturbed surface to match with existing incl taking down unsv complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCCB TPN 63 Amps, 10 KA 240 Volt, 50 Hz, IS/IEC 60898-1, 'C' curve including taking down unserviceable complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB SPN 32 Amp to 40 Amp, 10 KA, 240 volts, IS/IEC 60898-1, 'C' curve including taking down unserviceable complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F MCB SP 6 Amp to 32 Amp 10 KA, 240 volts, IS/IEC 60898-1, 'C' curve including taking down unserviceable complete all as specified and as directed. (Note :- Connection of cable in the DB Boxes/MCBs/MCCBs will be done with suitable thimble).

S&F Single pole and neutral enclosure with a two pin and earth plug and socket board with IS 13032, IS 8623 complete with one single pole 20 amp MCB complete incl dismantiling taking out unsv complete all as specifed and directed.

S&F Heating Element ISI Marked round/ tringular base, push type or thread type including rubber washer for 1.5/2.0 KW suitable for geysers 25 Ltrs to 50 Ltrs capacity (as per existing sample) including taking down unserviceable complete all as specified and as directed.

S&F thermostat ISI Marked suitable for geysers 25 Ltrs to 50 Ltrs capacity (as per existing sample) including taking down unserviceable complete all as specified and as directed.

S&F Cromium plated connections 45 Cm long for Hot/Cold water of 15mm size with cromium nuts and washsers fixed as in repairs complete all as specified.

S&Fin replacement Heating Element capacity 3.0KW (as per existing sample) ISI Marked round/ tringular base, push type or thread type including rubber washer suitable for Solar water heater of capacity 500 Ltrs to 1000 Lts capacity including taking down unserviceable complete all as specified and as directed.

S&F Thermostat ISI Marked round/ tringular base, push type or thread type including rubber washer (as per existing sample) suitable for Solar water heater of capacity 500 Ltrs to 1000 Lts capacity including taking down unserviceable complete all as specified and as directed.

M&L for repairing of tank leakage with company soldering of Solar water heater (any make) of capacity 500 Ltrs to 1000 Ltrs on existing place by Authorised and existing company with testing by Company rep after repaired till deleivery of water and incl all connected accessories complete incl taking down/ opened/ replaced the parts complete all as per specified and directed.

S & F in replacement PVC casing and caping ISI marked of size 25mm complete all as per specifiec and directed.

S & F in replacecment flexible conduit ISI markde of size 25mm complete all as per specifiec and directed.

S & F in replacement of PVC gang box suitable for 6 Amp Socket and 6 Amp switch complete all as per specifiec and directed.

S & F in replacement of PVC gang box suitable for 16 Amp Socket and 16 Amp switch complete all as per specifiec and directed.

S & F in replacement PVC rectangular switch board of size 300mmx 250mm x50mm incl necessary cutting slots for mounting switch sockets etc all as specified and directed.

S & F in replcement rectangular switch board of size 250mmx 200mm x50mm incl necessary cutting slots for mounting switch sockets etc all as specified and directed.

S & F in replcement rectangular switch board of size 200mmx 150mm x50mm incl necessary cutting slots for mounting switch sockets etc all as specified and directed.

S & F in replacement rectangular switch board of size 175mmx 100mm x50mm incl necessary cutting slots for mounting switch sockets etc all as specified and directed.

S & F in replacement rectangular switch board of size 100mmx 100mm x50mm incl necessary cutting slots for mounting switch sockets etc all as specified and directed.

S & F in replacement Laminated sheet cover hylam ISI marked 3mm thick ( incl suitable size steel screws - 04 Nos for each sheet) of Size12" x 10" complete all as specified and directed.

S & F in replacement Laminated sheet cover hylam ISI marked 3mm thick ( incl suitable size steel screws - 04 Nos for each sheet) of Size 8" x 5" complete all as specified and directed.

S & F in replacement Laminated sheet cover hylam ISI marked 3mm thick ( incl suitable size steel screws - 04 Nos for each sheet) of Size 5" x 5" complete all as specified and directed.

Supply only electric insulation tape heavy duty complete all as per specifed and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium, conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 06 Sq. mm x 2 Core nominal cross section in service connections complete all as per specifed and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium, conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sq. mm x 2 Core nominal cross section in service connections complete all as per specifed and directed.

Dismantling and taking out the unsv/burnt copper wire of the motor from the exhaust fan and rewinding the motor of the exhaust fan of any make of size 250mm/300mm/450mm sweep with super enamelled copper wire of same size guage and weight as per existing including necessary insulating material to gain desire RPM as per manufacture design and varnishing the winding with two coats of synthetic varnish including heat treatment oiling greasing complete and reassembling of all parts with testing on completion complete all as specified and directed.

S&F in repair Exhaust Fan 250mm Sweep plastic body, 1400 RPM with air delivery 1050 CMH including and taking down unserviceable and depositing to E/M Store complete all as specified and directed.

S&F in repair Exhaust Fan 300mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 1050 CMH including and taking down unserviceable and depositing to E/M Store complete all as specified and directed.

S&F in repair Exhaust Fan 450mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 6500 CMH including and taking down unserviceable and depositing to E/M Store complete all as specified and directed.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and light grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete ass as specified and directed Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

Amount of credit of Rs. 64410.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

ALPHA ENGINEERS AND BUILDERS

R B TRADERS

Rajesh Agencies

M/s Parmod Kumar

Vasudeva Trading Co.

Pankaj Traders

bharat refrigeration and electric co.