Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.1 LAccepted-AOC ANAND NAGAR ROAD NO 4 RAJAKHEDI MAKRONIA SAUGOR MP | SAUGOR | SAUGOR | MP | L1 | Accepted-AOC AOC | |
| 2 | L2₹14.5 L+₹11,906 (0.83%)Rejected-Finance | L2 | Rejected-Finance 2nd lowest bidder | |
| 3 | L3₹14.8 L+₹36,675 (2.54%)Rejected-Finance | L3 | Rejected-Finance 3rd lowest bidder | |
| 4 | L4₹15.0 L+₹62,102 (4.30%)Rejected-Finance H NO 114 A 10 GHAZI NAGAR RADDI CHOWKI GOHALPUR JABALPUR MP | L4 | Rejected-Finance 4th lowest bidder | |
| 5 | L5₹15.1 L+₹67,212 (4.66%)Rejected-Finance 117 GURU AMAR DASS NAGAR BHAISA SAUGOR MP | SAUGOR | SAGAR | MP | L5 | Rejected-Finance 5th lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
17 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SAUGOR
Garrison Engineer Saugor
COMPREHENSIVE MISC REPAIR/MAINT IN MD ACCN IN AGE B/R-II AREA UNDER GE SAUGOR
2023_MES_597059_1
GE/SGR/TOK-25 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE SAUGOR
Please ref tender documents
6 documents required · 6 mandatory
₹500
Garrison Engineer Sagar
₹40,000
Yes
30 Jun 2023
22 May 2023
19 Jun 2023
22 May 2023
17 Jun 2023
5 Jun 2023
22 May 2023 - 28 May 2023
Amount
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed
Demolition of RCC in precast cover slab any thicknes (reinforced) complete all as specified and directed
Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding (but not backing) rubbish off the premises complete all as specified and directed
Demolition of stone sett paving of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor complete all as specified and directed
Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed
Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but not exc 4 Sqm each complete all as specified and directed .
Taking down shutters of any description not exc 1sqm each complete all as specified and directed
Taking down shutters of any description exc 1sqm but not exc 2sqm each complete all as specified and directed
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in concrete, brick work, masonry, etc., complete all as specified and directed
M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.
Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.
M&L for mild steel TMT bars 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed
M&L fpr precast reinforced cement concrete type B1, 1:2:4 {using 20 mm graded stone aggregates) set in CM(1:4) in landings,kitchen platform, cover slabs (for manholes etc.), chajjas, shelves and similar articles with plain faces complete all as specified and directed .
M&L for precast cement concrete louvers and jallies 35 mm thick, type B-0, 1:2:4 (using 12.5mm graded stone aggregates) set in cement mortar (1:4), (measured solid), including all mouldings including dismantling of existing jallies of any description complete all as specified and directed
M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or beding layer in cement mortar (1:6) complete all as specified and directed.
M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and n. exc. 0.18 sqm (400 x 400 mm joint free (rectified) ) as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed
All as per Srl item No. 18 above but in dado / skirting laid over and including 10 mm thick rendering in CM (1:4) -ditto-
M&L for glazed ceramic tiles of size 600mmx 300mmx7mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match the colour of tiles laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed .
M&L for 600mmx600mmx8mm to 10mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed
All as per Srl item No. 21 above but in dado / skirting laid over and including 10 mm thick rendering in CM (1:4) -ditto-
M&L for mirror polished machine cut Kota stone slab flooring 18mm to 20 mm thick laid over and including 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed
M&L for Kota stone slab 12mm to 15mm thick in skirting laid over and including 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed
M&L for 16mm to 18mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs complete all as specified and directed
M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking platform and other similar situations complete all as specified and directed
M&L for coloured designer tiles exterior grade ( Endura or equivalent make as specified in Appx 'C' of Particular Specifications) 10mm thick over and including 15 mm thick cement mortor 1:6 set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floor complete all as specified and directed
M&L for machine pressed precast concrete interlocking paver block glossy finished chemically treated any shape and size confirming to IS-15658-2006 size of 60 mm thickness, M-35 Grade with grey cement and pigment over and including 30 to 50mm stone dust cushioning complete all as specified and directed.
M&L for plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregates) as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of construction joint with bitumenous sealing compound complete all as specified and directed.
M&L for plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) as in foundation filling and mass concrete all as specified and directed
M&L for rendering 15mm thick cement plaster on wall in cement mortar (1:6) on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed
M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) mixed with water proofing compound @ 2% by wt of cement complete all as specified and directed. Note:-Water proofing compound shall be measured and paid separately
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed
M&L for plain cement concrete 1:2:4, type B0 (using 12.5mm graded stone aggregates) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and including necessary form work complete all as specified and directed
M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed
M&L for applying three coats of white wash on new ceiling surface including preparation of surfaces complete all as specified and directed.
M&L for applying two coats of exterior emulsion anti fungal paint on newly platered surface of walls incl preparation of surfaces with one coat of primer complete all as specified and directed. Make:- ACE or equivalent make as specified in Appx 'C' of Particular Specifications
S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and incl S & F coloured Non Asbestos designer ceiling cement boards 4 mm thick including dismantling Textile coverings including frames (if any) & cover fillets in ceilings (measured flat & not girthed) complete all as specified and directed.
M&L for 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs fixed with L-type or J-type or cranked hook bolts including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and refixing the same complete all as specified and directed..
S&F 6mm thick asbestos cement serrated ridge or hip ridge for corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed.
M&L for second class hardwood in scantlings , timber clean sawn framed and fixed including dismantling unframed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed.
M&L for preparing surfaces of wood & wood based materials, new or old, of any description & girth, not otherwise described & treated with one coat of cresote complete all as specified and directed.
M&L for second class hardwood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed
M&L for second class hardwood clean sawn straight scantling area exc. 13 & n. exc. 25 sqcm each for fixing to existing chowkats with nails complete all as specified and directed
S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1:2:4, type B-1 (using 20 mm graded stone aggregates) and M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and as directed
All as per Srl item No.46 above but size 125mm x60mm -ditto-
S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }
S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }
S&F 35mm thick second class HW factory made plain framed, penelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per : IS 1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and directed
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides, complete all as specified and directed(with double or single shutter complete all as specified and directed
S&F second class hardwood factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors supplied and fitted to chowkats complete all as specified and directed.
S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube complete all as specified and directed
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm prelam PVC sheet on back face complete all as specified and directed
S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F in repairs galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F second class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc and removing old beads complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
M&L for preparation of new wooden surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed
S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm complete all as specified and directed.
S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed
S&F mild steel pressed handles,150mm oval type, stove enamelled black complete all as specified and directed
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed.
S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt 300 mm . complete all as specified and directed.
S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel and fixed complete all as specified and directed.
S&F 100mm Butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed
S&F door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws complete all as specified and directed
S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed
M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregates) as in filling of hold fast complete all as specified and directed
Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. One brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required complete all as specified and directed
M&L for preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & girth, not otherwise described, & treated with tar or coal tar black paint complete all as specified and directed
S&F framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.
Hacking out old broken glass (any tickness, size,quality or description) from wooden / steel framesglazed with oil putty or fixed with beads complete all as specified and directed.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F in repairs 110mm bore PVC(SWR) pipe single soketed in any length with rubber ring jointed fixed to wall or laid in trenches with and including mild steel clamps of suitable size complete all as specified and directed
S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed
S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .
S&F in repairs PVC (SWR) pipe 75mm bore single socketed, in any length with solvent joints fixed to wall or laid in trenches or in floors complete all as specified and directed.
S&F in repairs PVC (SWR) bends 75mm dia complete all as specified and directed
S&F in repairs PVC(SWR) vent cowl of 75mm dia complete all as specified and directed
S&F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvent complete all as specified and directed
S&F in repairs 25 mm dia aluminium powder coated droppery rod including brackets complete all as specified and directed
S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15 mm dia GI tubing and connections and cutting and screwing to existing GI tubing for addition alteration, complete all as specified and directed.
Taking down 15 mm dia GI tubing and connection and refixing old 15mm GI tubing and connection in new or old position ( wall, floor, wall etc ) complete all as specified and directed.
S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm dia GI tubing and connections and cutting and screwing to existing GI tubing for addition alteration complete all as specified and directed
Taking down 20 mm dia GI tubing and connection and refixing old 20mm GI tubing and connection in new or old position ( wall, floor, wall, etc ) complete all as specified and directed .
S&F in repairs PVC float valve assembly including assessories with float valve 20mm dia (Make prayag) complete all as specified and directed.
S&F in repairs soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed
S&F in repairs C P bib taps, cast copper alloy fancy concealed type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed.
S&F in repairs angular stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed
S&F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed
S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm-90gm) complete all as specified and directed
S&F in repairs pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore complete all as specified & directed.
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed
S&F in repairs vitreous China WHB white flat back size 550mmx400mm including S&F angle iron brackets, C.P pillar tap fancy type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.
S&F in repairs vitreous China squatting pan 'Orrisa pattern' size 580mmx440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including P or S trap complete all as specified and directed
S&F in repairs vitreous China wash down water closet pan (pedastal pattern), white including white seat cover complete all as specified and directed
S&F in repairs Brass CP bottle traps 40mm bore for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap complete all as specified and directed
S&F in repairs vitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed
S&F in repairs stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x420mm with bowl size 410mm x330mm x160mm complete all as specified and directed
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.
S&F in repairs PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend complete all as specified and directed.
S&F in repairs Tolilet paper holder, vitreous China white, box type to walls with CP (CP) brass screws complete all as specified and directed
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position all as specified in SSR Part-I of 1000 Ltrs Capacity including dismantling water tanks complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted & fixed in position all as specified in SSR Part-I of 500 Ltrs Capacity including dismantling water tanks complete all as specified and directed.
S&F in repairs 125 mm size brass chormium plated shower rose with long body including fixing to steel pipe or union complete all as specified & directed.
M&L for treatement for sunken portion is as follows :- (a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (b) M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement. (c) M&L for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces. (d) M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion) (e) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick on top. Note :- Above quoted rate includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by ponding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontal flat area to be measured.
Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor complete all as specified and directed
M&L for point wiring for the following with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green:-
One light point or fan point controlled by one switch
One Call Bell point controlled by one push button switch
5Amp independent socket point controlled by one switch
One 3 pin ,5 Amp socket point with other switch on the same board
All as per Srl item No.112 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as connected earth wire
M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green:-
One light point or fan point controlled by one switch
One Call Bell point controlled by one push button switch
5Amp independent socket point controlled by one switch
One 3 pin ,5 Amp socket point with other switch on the same board
All as per Srl item No 114 here in before but for power point wiring using with 2.5 sqmm PVC FRLSH insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as connected earth wire
S&F modular switch, one way,6 Amp 230, 1 module complete all as specified and directed
S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed
S&F modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed.
S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed
S&F modular fan step regulator 120 Watt -2 module complete all as specified and directed .
S&F modular bell push 6A one module complete all as specified and directed .
S&F switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed.
S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed.
S&F switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed.
S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed
S&F ceiling rose, surface backlite, three terminal complete all as specified and directed .
S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.
S&F in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed.
S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed .
S&F bell push flush type one way 5Amp 240 Volt complete all as specified and directed
M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge.
S&F in replacement MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed
S&F in replacement MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed
S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good the disturbed surfaces shall be included in the quoted rate
S&F in replacement double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good the disturbed surfaces shall be included in the quoted rate
S&F in repalcement TL fitting 20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed
S&F in replacement socket outlet multi purpose, 3 pin, 15 Amp & 3 pin, 5 Amp combination complete all as specified and directed
M K Construction
v k builder
HAFEEZ CONSTRUCTION
AJIT SINGH TUTEJA
maharaja construction and suppliers
SAGAR MOTOR AND TRACTOR CO
siddhant construction
RAHMAT ALI
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .