REPAIR/MAINT OF CHQ, SW MESS, COMBAT MESS, GEN ROAD, KLP BLDGS AND OTHER OTM ACCN AT AWC UNDER GE (AWC) MHOW.

Amount

Taking down shutter of any description n exc. 1 Sqm each complete and removing from the site. The quoted unit rate is deemed to included the necessary cost of dismantling of brick work or concrete and making the same as per existing specifications.

Taking down shutter of any description exc. 1 Sqm but n. exc. 2 Sqm each complete and removing from the site. The quoted unit rate is deemed to included the necessary cost of dismantling of brick work or concrete and making the same as per existing specifications.

Taking down chowkhats or frames not exc 1.5 sqm each with shutter ( without taking off shutter from the frame )complete and removing from the site. The quoted unit rate is deemed to included the necessary cost of dismantling of brick work or concrete and making the same as per existing specifications.

Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter from the frame ) and removing from the site. The quoted unit rate is deemed to included the necessary cost of dismantling of brick work or concrete and making the same as per existing specifications.

M & L 2 nd class hard wood Plain solid , straight chowkhats and frames wrought, framed on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as directed .

M & L for PCC 1:2:4 type C-1 (using 12.50 mm graded stone aggregate) as in hold fasts including necessary use and waste of form work complete all as specified and directed.

M&L Preaparation surfaces of wood and wood based materials and treated with tar to backs of chowkhats etc. area tarred exc 0.10 sqm but not exceeding 0.50 sqm each complete all as specified.

M&L preparing surfaces of wood and wood based materials , steel and iron work , new or old , of any description and girth, not otherwise described , and treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkhats, etc.'area tarred n exc 0.1 sq.m each with tar or coal tar black paint all as specified.

M & L 2 nd class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels) factory made , with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed.

S & F 30 mm thick Flush shutters , solid core construction, with block board core and plywood face panels one face is covered with decorative face veneer with lipping/ frame to match fixed to chowkats complete all as specified and directed. Make:-Kitply Industries, Northern Doors Pvt Ltd Kanpur, A-1 Teak Product Pvt Ltd Indore

S & F 2 nd class hard wood 35 mm thick Glazed and skeleton shutters factory made, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S & F 2 nd class hard wood 30 mm thick Glazed and skeleton shutters factory made, open rebated and prepared to receive glass , gauze, etc, (with sash bar) edges divided into squares, with plain chamfered or rounded , mitred and rebated sash bars of any numbers ,beads, for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete. Make :- “SYNTEX/ Rajshree Plastic wood Forex, Indore”.M/S Kumar Arch Tech Ltd

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part-II (2010) and as directed by GE/Engineer-in-Charge. Make : “SYNTEX, RajshreePlastic wood Forex, Indore”.M/S Kumar Arch Tech Ltd

S & F 100 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

S & F 75 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and directed.

S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete .

S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete. Make :- Classic, New Delhi, Mepro, M/S Elite Enterprises

S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete. Make :- Classic, New Delhi, Mepro, M/S Elite Enterprises.

S&F 150 mm long Aluminium handles, cast type anodised 'D' shaped , 150mm long ISI marked all as specified. Make :- Classic, New Delhi, Mepro, M/S Elite Enterprises

M & L 150mm length floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor complete all as specified and as directed. Make :- Classic, New Delhi, Mepro, M/S Elite Enterprises

S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

S&F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete all as specified and as directed

S & F in repairs door closer cast iron body hydraulically regulated , universal type suitable for door shutters 851mm to 1000 mm in width and weight between 61 to 80 kg of aluminum (die cast) body and fixed etc all as specified and as directed

S & F in repairs double action floor spring hudraulically regulated made up minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless cover, governig pivot made of brass other parts made of mild steel heavy duty complete all as specified and as directed. Make : KELWIN or equivqlent of other make as approved by GE.

S & F powder coated aluminum door with the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a) Cross section of xchowkhat frame 101.60x44.45x2mm thick. (b) Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d) Bottom rail of cross section 114x44x2mm thick. (e) Locking rail (middle rail ) of cross section 83x44x2mm thick. (f) 4mm thick tinted glass make Modi, float . (g) Aluminum handle eisc type -02 Nos per shutter ( inside & out side). (h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j) Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter.

S & F powder coated aluminium sliding glazed windows with three track , three shutter sliding with following specification and making good the adjacent side etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos

Taking down Aluminium door shutters exc 1 sqm and n exc 2 Sqm each and refixing in same opening after resetting ,, resecuring or easing & adjusting including necessary bolts and nuts, securing rods , washers etc complete all as specified and directed .

Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads.

M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane.

M & L for 3 mm thick figured glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane.

S & F in repairs Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed.

Supply only Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm

Supply only 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane fixed with beads ( supplied with joinery ) complete all as specified.

M & L Preparation of New wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed.

M & L Preparation of old wood painted surfaces of any description , not otherwise description, over 10 cm width or grith apply one coat of synthetic enemel paint (ordinary tint) complete all as specifed and directed.

M & L Preparation of old wood painted surfaces of any description , not otherwise description, n exc 10 cm width or grith apply one coat of synthetic enemel paint (ordinary tint) complete all as specifed and directed.

M & L Preparing of old surfaces and apply one coat of French polishing on surfaces of any description, width or grith including cleaning and preparing the surface including a coat of wood filler on old work complete all as specified and directed.

M & L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, ceiling etc including rakking out joints , hacking for key , scrubbing down with water at any height etc all as specified and as directed.

M & L 12 mm thick rendering in cement mortar 1:6 on brick work or concrete surface, surface finished even and fair complete.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, mixed with water proofing compound, surface finished even and smooth complete.

M & L 10 mm thick plastering in cement mortar 1:3 on ceiling surfaces on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M & L Preparation newly plastered surfaces and applying 3mm thick of Birla White Wall care putty on surfaces of wall as per manufacture's instruction complete all as specified and directed.

M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all as per specified and directed.

M & L preparing of newly plaster surfaces of wall, cornices etc by washing, rubbing down and applying two coat of cement based paint complete all as specified and as directed.

M & L preparing of newly plastered surfaces of wall , pillasters, cornices etc and applying two coats of coloured acrylic water emulsion paint over a coat of precoated treatement as manufacturer instruction complete all as specified. Make acrylic water emulsion paint Asian (Apex Ultima) or Nerolac (Excel Total or weather shield max (ICI Dulux.) Make of Primer :- Asian (X2). Note :- Contractor shall be obtained the warrantee from the manufacturer and submit the same to the Engineer in charge before claiming the payment

M & L for preparation of newly plaster surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M & L preparing of old painted surfaces of wall, pilasters, cornices etc by washing, rubbing down and stoping etc and applying one coat of cement based paint complete all as specified and as directed.

M&L for preparation of old wall surfaces and applying one coats of coloured acrylic water emulsion paint as per the manufacturer's instructions complete all as specified and as directed Make :-Apex Ultima,Nerolac (Excel Total) ICI Dulux (Weather shealed max) or equivalent.

M&L preparation of Old decorated distempered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distermpered and painted surfaces and distempering wall by applying one coat of distermper oil emulsion of any tint/ shade complete all as specified.

M & L preparing old decorated plaster or un-plastered surfaces of ceiling & wall and applying one coat of white wash complete all as specified and as directed.

M&L for securing glass of description or at any height in existing wooden/steel frame glazed with putty/beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, groove, reputtying and painting/oiling puttied surfaces to match existing work etc all as specified and directed by Engr-in-Charge

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed. Make:- Kajaria , City Tiles Ltd , Johnson(Marbonite) Note :- Tiling shall be as in patches or of any size or any description , any colour, any location or all as directed by Engineer - in -Charge.

Description same all as per item No 56.00 here in before but in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and directed. Make:- Kajaria , City Tiles Ltd , Johnson(Marbonite)

Description same all as per item No 58.00 here in beforebut in vertical surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L glazed ceramic coloured tiles, 300mmx200mm x 7 mm thick on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1:4 complete all as specified and directed. Make:- Kajaria , City Tiles Ltd , Johnson(Marbonite)

M&L chequered cement concrete tiles 25mm thick of size as approved by GE set jointed and pointed in neat cement slurry in floors with white cement & pigment laid over 20 mm screed in CM 1:6 complete all as specified. Make :- Nitco Mumbai, Redsun Tiles & Pavers Panchkula , Mayur Tiles &Interlocking Paves Lucknow

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapit wall over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown as per direction of GE

M/L Baroda green marble 20 mm thick machine cut, in steps/floors bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Baroda green including grinding and polishing complete to match over and including 15mm thick screed bed in cement mortar 1:4 comlete all as specified and as directed

M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.

Description same as per item No 65.00 above but as in skirting or vertical surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed.

Demolition of Brick work built in cement mortar including all quoins arches pillars etc complete all as specified and directed.

M&L Brick work with sub class 'B' modular brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

Dismantling PVC water tanks Exc 250 ltrs but not 500 ltrs removing from the site .

Dismantling PVC water tanks Exc 500 ltrs but not 1000 ltrs and removing from the site.

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks three layerd , (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part-I(2009) complete all as specified and directed. Make :- Sintex, Tuff, JS Poly Plast

S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks three layerd , (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part-I(2009) complete all as specified and directed. Make :- Sintex, Tuff, JS Poly Plast

S & F in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete. Make Prayag or equivalent as pre approved by GE.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 250 litre & n.exc 500 litre capacity including lime wash and CLEANED ON date should be mentioned on tank with the synthetic Enamell paint as directed at site by the Engineer in Charge.. The quoted unit rate is deemed to be included the cost of writing.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 500 litre & n.exc 1000 litre capacity including lime wash and CLEANED ON dated should be mentioned on tank with the synthetic Enamell paint as directed at site by the Engineer in Charge. The quoted unit rate is deemed to be included the cost of writing.

S & F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete.. Note :- Pillar tape shall be measured as supply only under respective item. Make: Hindustan Sanitary Ware ( 1st quality) , Parryware (Superfine) , Cera (1st quality)

Supply only 15 mm dia pillar tap brass chromium plated with capstan heads, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts complete. Make - Cat part No DL-55102 of Plumber , Catpart No VIR-191 of Pearl, Cat part No FLR-5169 NB of Jaquar

Supply and fixing ( In Repairs) POLYTETRA METHYLENE TEREPHTHALATE (PTMT) ENGINEERING THERMOPLASTIC Bib taps standard of PTMT any colour screwed, for iron pipe and fixed ( Minimum weight 15 mm- 90 gms complete all as specified. Make :- Prayag , Pearl, Parryware

Taking up or down existing 15 mm dia steel tubing and connection and removing complete.

Taking up or down existing 20 mm dia steel tubing and connection and removing complete.

Supplying, fixing, 15mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete. Make :- Tata, Jindal , Prakash

Supplying, fixing, 20 mm dia bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, complete.Make :- Tata, Jindal , Prakash

S & F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including bracket with 32 mm dia PVC pipe 600 mm long complete. Make: Hindustan Sanitary Ware ( 1st quality) , Parryware (Superfine) , Cera (1st quality)

S & F in repairs 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.

S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed (Make as spproved by GE).

S & F in repair 25mm dia Powder coated curtain rod fixed with modren bracket of any type or any design as approved by Engr -in Charge complete all as specified and directed.

S & F in repairs PVC connection 15 mm dia 600 mm long with PTMT nuts at both ends complete all as specified and directed. Make Prayag or equivalent .

S & F( in repairs) Vitreous chaina wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed. Make :- Parryware (Super fine), Hindware,Johnson Pedder.

S & F (in repairs) 75 mm bore Cast iron soil, waste pipe and vent pipes, in any length with or without ears, with cement joints fixed to walls. Make:- Electrosteel, Kesoram, Tata, Jindal

S & F (in repairs) 100 mm bore Cast iron soil, waste pipe and vent pipes, in any length with or without ears, with cement joints fixed to walls. Make:- Electrosteel, Kesoram, Tata, Jindal

S & F (in repairs) 75 mm bore cast iron bends (larger bore measured) complete all as specified. Make:- Electrosteel, Kesoram, Tata, Jindal

S & F (in repairs) 100 mm bore cast iron bends (larger bore measured) complete all as specified. Make:- Electrosteel, Kesoram, Tata, Jindal

S & F (in repairs) 75 mm bore cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified .

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.

S&F in repair 15 mm dia bore chromium plated 3 in 1 wall mixer complete all as specified and as directed. Make - Cat part No DL-55101of Plumber , Catpart No JUP-361of Pearl, Cat part No SOL-6219 of Jaquar

S & F in repair Bidet spray (Health faucet) with 1 meter tube and holder, complete all as specified and directed. Make - Cat part No IT-1940Mof Plumber , Catpart No HF-130 of Pearl, Cat part No ALD-CHR-583 of Jaquar

S & F in repair PVC bath cabinet box type with shutter complete. (Make :- Prayag /plumber/ESS)

S & F(in repair) 15 mm dia bore chromium plated concealed stop cock, complete. Make :Make - Cat part NoFLP-0405 of Plumber , Catpart No ARI-009 of Pearl, Cat part No CQT-23083 of Jaquar

S&F in repair CP towel Ring Square with Round Flange, complete all as specified and directed by Engineer-incharge. Make:- Plumber cat part No . ER-0912, Cat part No BAB -399 of Pearl, Cat part No AQN-7221 of Jaquar

S&F in repair CP thumbler Holder, complete all as specified and directed by Engineer-incharge. Make - Cat part No U-0914 of Plumber , Catpart No BAB-403 of Pearl, Cat part No AKP-3574IP of Jaquar

S&F in repair CP Soap Dish with ABS dish Holder, complete all as specified and directed by Engineer-incharge. Make:-Make - Cat part No U-0913 Mof Plumber , Catpart No BAB-398 of Pearl, Cat part No AKP-35751 of Jaquar

S&F in repair CP Toilet paper holder, complete all as specified and directed by Engineer-incharge. Make:- Plumber Cat Part No. U-0916 , Pearl Cat part No 18051, Jaquar cat part No CAN-1153N

S & F (in repair) brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete. Make : Plumber Cat No FLP-0507 , Pearl cat part No PIS-103 , Jaquar Cat part No CQT-23059

S & F( in repair) 15 mm bore bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete.. Make - Cat part No FLP-0203 Mof Plumber , Catpart No JUP-379 of Pearl, Cat part No ORP-10037PMof Jaquar

S & F in repair brass chromium plated towel rail 20 mm outer dia Bracket type, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete.Make - Cat part No U-0911 of Plumber , Catpart No BAB-400 of Pearl, Cat part No ACN1111NM of Jaquar.

S & F in repair swivel shower rose of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe or union. Make - Cat part NoITP-2101of Plumber , Catpart No SHP-527 of Pearl, Cat part No OHS-1989 of Jaquar

M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished exc 5sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member n.exc 70mm at any height complete all as specified. Note : - Cost of formwork and welded mesh shall be deemed to be included.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level.

M&L PCC 1:2:4 type B1 40mm thick, using 20mm graded stone aggregate in flooring and finished surface even and smooth using extra cement.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate 75mm thick as in plinth protection, finished concrete surfaces even and smooth without using extra cement

S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.Make :- Finolex,Supreme, Kissan Mouldings Pvt Ltd

S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed in floor/ trenches complete all as specified and directed.Make :- Finolex,Supreme, Kissan Mouldings Pvt Ltd

S & F in repair 110 mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.Make :- Finolex,Supreme, Kissan Mouldings Pvt Ltd

S & F in repair 75mm dia bore PVC (SWR) bends any radius with solvent cement joints, fixed complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.Make :- Finolex,Supreme, Kissan Mouldings Pvt Ltd

S & F in repair 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with solvent cement joints, fixed complete all as specified and directed.Make :- Finolex,Supreme, Kissan Mouldings Pvt Ltd

S & F in repair vitreous china Urinal , Half stall type white with waste pipe and union for discharge pipe (excluding flushing cistern,flush pipe) complete all as specified and as directed.

S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete.Make :- Finolex,Supreme, Kissan Mouldings Pvt Ltd

S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed. Make :- Nirali , Diamond ,Jain Brothers Sanitation Pvt Ltd

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm X 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete.

Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards /slabs/blankets, any thickness including cover fillets complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Dismantling Plain or corrugated steel sheeting, any guage, thickness, including nainital or similar pattern roof coverings.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings.

S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted.

S & F Joist, channel, angle or tee , square or rectangular, tubler sections, fixed indipendently or as purlin , rafter, or post including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts , providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed.(Fe-410-W(Gde-E-250) quality A).

S & F Anodised aluminium sanp grid frame work of size 605 x 605 mm for flase ceiling securing with 4 mm dia GI wire of 1.20 mtr centre to centre tying to roof members or bolting with self taping screws including all necessary arrengements complete all as specified and directed.Make :- M/S Arm strong, M/ S Everest Industries, Indian Gypsum.

M & L 12 mm thick Gypsum Board as in ceiling or wall penalling fixed with screws as per manufactur's instructions complete all as specified and directed. Make :- Ramco Industries, Arm strong.

M & L 6 mm thick asbestos cement , corrugated or semi corrugated sheets as in roofs, wall etc fixed with L type or J type or cranked hook blots complete all as specified and directed.

Dismantling of unframed/ framed boarding , any description,including fitting and fixtures fixed in any position with nails

S& F 18/19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws timber frame work as in cupboard , wardrobe etc.

M & L 0.9 mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive over 12 mm thick plywood as per manufacturer's instructions complete all as directed and specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt, ISI marked complete all as specified.

S & F 30 mm width of flaps (when open) Continous (piano) hinges , mild steel, bright finish or electrogalvanised complete all as directed and specified.

S&F Aluminium handles, cast type anodised 'D' shaped , 100mm long ISI marked all as specified.

S & F 100 mm length Hasp and staple, mild steel, wire type stove enemelled black , including bolt to hinge plate and fixed with screws complete all as specified and directed.

Demolition lime Concrete (un-reinforced) of any descriptions in any position complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:3 on concrete/brick surface finished even and smooth without using extra cement mixed with WPC ( WPC shall be measured and paid separately).

Supply only integral WPC. Make :- Water seal from Acro Paints, Impermo from Snow CEM, Accorproof from ACC, Pidilite Industries.

Applying evenly a tack coat of industrial bitumen grade 85/25 at the rate of 1.20 kg/ sqm incl cleaning surfaces complete all as directed at site.

M&L Lime concrete with brick agg 40 mm with lime mortar 1:3 complete all as directed at site .

M&L for PCC 1:2:4 type B0 using 12.50mm graded stone aggregate 25 mm average thickness as in levelling coarse complete all as specified and directed.

M&L in repairs for heritage regular flakes finish which is made from china clay, pigments homo polymer emulsion and bonding agent Acrylic emulsion Top coat (glossy/matt finished) based on solvent based polymer 0.8mm to 1.2mm thick single coat as per approved shade, as per manufacturers instructions and applying on vertical surfaces of walls, columns, pipes soffits of beams and chajja etc complete all as specified and directed. Make:-BAKELITE HYLUM LTD brand Heritage/DOLPHIN/LUXTURE as approved by GE

ram prashad chotelal batham

Goyal Construction