Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.3 LAccepted-AOC | L1 | Accepted-AOC 1st Lowest | |
| 2 | L2₹44.3 L+₹28,506.11 (0.65%)Rejected-Finance | L2 | Rejected-Finance Higher bid value | |
| 3 | L3₹44.6 L+₹65,885.40 (1.50%)Rejected-Finance | L3 | Rejected-Finance Higher bid value | |
| 4 | L4₹44.7 L+₹69,744.28 (1.59%)Rejected-Finance RANGAPAHAR CROSSING RAILWAY GATE NO 1 DIMAPUR 797 112 NAGALAND | DIMAPUR | DIMAPUR | NAGALAND | 797112 | L4 | Rejected-Finance Higher bid value | |
| 5 | L5₹45.5 L+₹1.5 L (3.41%)Rejected-Finance | L5 | Rejected-Finance Higher bid value |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
31 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 868 EWS
GE 868 EWS PIN- 913 868 C/o 99 APO
SPL REPAIR TO BLDG NO T34 T36 AND T50 OF 3 CESR ADDN ALTN TO SECURITY FENCING AND PROVN OF VEH PARKING SHED AT HQ 148 MC GROUP AND PROVN OF CHAIN LINK FENCING WITH SECURITY LIGHT FROM TOWER NO 11 TO BLDG NO T17 IN H ZONE AT RMS
2022_MES_556171_3
8498/C/E8
Open Tender
Civil Works
Item Rate
180 days
RANGAPAHAR
Class D, Category a(i)
3 documents required · 3 mandatory
₹500
GE 868 EWS
₹88,000
3 Mar 2023
19 Dec 2022
2 Jan 2023
19 Dec 2022
31 Dec 2022
26 Dec 2022
19 Dec 2022 - 23 Dec 2022
Amount
B/R Portion Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft/loose soil all as specified.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out Soft/Loose soil all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm hard/dense soil all as specified.
Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
M&L for Plain Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in Coping all as specified
M&L for PCC Type C-2, 1:3:6 using 40mm graded stone aggregate, as in foundation filling and mass concrete all as specified.
M&L for Plain Cement concrete type B-2, 1:2:4 (using 40mm graded aggregate) as in foundation filling and mass concrete all as specified.
M&L for PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) in foundations, filling and mass concrete.
Excavation post holes (or similar holes) each n exc. 0.5 Cum, getting out Soft/ loose soil, Returning, filling in and ramming earth or broken rubble mixed with earth around, in layersn.exc. 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surface.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and as directed.
M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick work/concrete surfaces finished even and fair extra cement complete all as specified and directed.
S&F steel work in tubular trusses, pillar, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240
S&F joint, channel, angle or tee section, fixed independently without connecting plate etc (cut to ordinary length) i.e within 20mm of length grde Fe 410-0 or Fe-310-0
S&F plates (plain or chequered) channels. Square cut or notched ) (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W
S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other end to be fitted with washer and one hexagonal or squre nut n exc 15cm long 12mm dia
S & F MS TMT bars of 10mm dia fixed behind chaing link fencing as guard bars etc and similar articles conforming to Fe 410-O or Fe-310-O complete all as specified and directed.
S&F of mild steel angles,bars, flats etc as in supports for posts and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire,etc, flat iron fillets (For securing wire mesh etc.,) including all necessary drilling,bolting or riveting,etc., and similar work conforming to fe 410-0 or Fe 310-O.
S&F of Mild steel bolts n. exc 30cm long, purpose made,with hexagonal or square headed one end and screwed the other, or screwed the both ends and each end to be fitted with washers and one hexagonal or square nut n.exc 12mm dia.
Supply only 3.60mm dia GI chain link fencing of mesh size 75 X 75 mm with PVC coated complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh,size and type to any type of standards, rails straining bolts etc. including provision of binding wire.
S & F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc complete all as specified and directed. (Each line wire to be measured)
M&L for preparation of new or previously untreated steel surfaces of any description exc. 10cm width or girth ,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.
M&L for preparation of new or previously untreated steel surfaces of any description n.exc.10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.
M&L for applying two coats of white wash including preparing of new surfaces.
S&F Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws.
S&F Prepainted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws.
M&L for preparation of new plastered surfaces and applying two coats of cemnet base paint over a coat of chalk whitening on wall all as specified and directed.
Dismantling asbestos cement (Corrugated or semi corrugated) sheets in roof covering.
Demolition of reed lathing single or double including battens and plaster or chicken wire lathing.
Dismantling timber scantlings 40 sqcm and over in section, in unframed work any position.
Demolition of cement concrete in ground floors and pavings n.exc 15 cm thick above or below ground level.
Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches etc complete
Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames.
All as per item 34 above but exceeding 1.5 Sqm but not exceeding 4 Sqm each
M&L for rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E 250) quality-A
S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps.
M&L for second class hardwood as in scantlings clean sawn timber fixed.
M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm.
Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints, 2nd class HW.
M&L for 35 mm thick 2nd class hardwood plain framed pannelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density , wood particle board with commercial face veneers , supplied and fitted to chowkats complete all as specified and directed.
S &F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.23 (a)
S&F 30 mm thick 2nd hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. ( with and without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats. all as specified.
S & F chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0, complete all as specified and as directed by the Engineer-in-Charge
M&L for sheet glass 3mm thick ordinary quality, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane.
S&F mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 18mm, fixed with tinned tacks or galvanized wire staples.
S & F 100 size stainless steel butt hinges complete all as specified and directed
S & F 75 size stainless steel butt hinges complete all as specified and directed
Supply & Fixing 150 mm Aluminium handles, cast type, anodised
Supply & Fixing 100 mm Aluminium handles, cast type, anodised
S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed
S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed
S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed
S&F mild steel 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete
M&L for rendering 15 mm thick in CM 1:4 on one side of lathing finished even and smooth without using extra cement.
M&L for rendering 12 mm thick in CM 1:6 on other side of lathing finished even and smooth without using extra cement.
S & F 0.71 mm dia wire netting of galvanised steel wire of size 12 mm mesh fixed with tinned tack of wire staple.
Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4.
Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement.
M&L for preparation of new plastered surfaces and applying three coats of white wash on walls all as specified & directed
M&L for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint in any tint complete all as specified.
Dismantling Stone sett paving of any description or thickness
M & L for PCC 25mm thick type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in sub base of floor complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 20mm thick screed bed in CM 1:3 complete all as specified and directed.
M&L for Spreading and levelling in layers n exc. 25 cm thick omplete all as specified and directed.
M&L 100 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in path and hard standing and finished even and smooth without using extra cement
M & L for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in plinth protection finished fair and even.
M&L Forming 10 mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 100mm thick PCC complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
S & F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to GDE Fe410-W complete all as specified and as directed by the Engineer-in-Charge
S & F for 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.
S & F for rolled mild steel in plates channels (plain or chequered), square cut or notched (ordinary and counter sunk) forming holes, without any attachment, of quality GDE Fe 410-S complete all as specified and as directed by the Engineer-in-Charge
M & L for hand rails, half round or other stock section or core for wooden handrail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed by the Engineer-in-Charge
M&L for hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick broken stone, water and ramed to atrue surfaces complete all as specified and directed.
M & L for Cement Concrete 1:2:4 type B1 using 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by the Engineer-in-Charge.
M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge
M & L for mild steel TMT bars of 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by the Engineer-in-Charge
Demolition, Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.
M&L for preparation of new wooden fillets surfaces and wood based surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pint wood primer. in tint as directed.
M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all as specified and directed
All as per item No 81 here in before but applying two coats of synthetic enamel paint over a coat of pink wood primer on new surfaces.
E/M Portion Taking down carefully copper/ aluminium point wiring (light, fan, socket or power) complete, including fitting & fixtures such as switches with board, ceiling roses, pendents, bell/ buzzer, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good to the disturbed surfaces of walls, ceiling, floors etc. including making good the disturbed surfaces and paint touch up to match with the existing surface complete all as specified and as directed.
M&L for Point wiring complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable 1100 volts grade with multi-stranded copper conductors, drawn through and including PVC double locked Casing & caping including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators etc. with 3 mm thick plastic laminated sheet cover of suitable size as required at site complete all as specified and as directed. Make : Richa/ Havells/ RR Cables. Casing/ Capping/conduit : Richa/ Prestoplast/ Finolex
One light point controlled by one, one way switch .
One Exh/Ceiling fan point controlled by one, one way switch.
One 3 pin socket outlet 5 Amps on the same board with other switches.
One 3 pin socket outlet 5 Amps on the Independent board.
All as per item No 84 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.
M&L for Switch piano flush type single pole, one way 6 Amp Make:- Anchor/Legrand/Havells
M&L for Socket outlet, 2 in 1, 3 pin 6 Amp flush typeMake:- Havells/Legrand/Anchor
M&L for Switch Socket combination, 2 in 1, 5 pin 6 Amp flush type. Make:- Anchor/Legrand/Havells
M&L Switch socket combination 2 in 1, 6/16 Amp, 5 in 1 flush type Make:- Anchor/Legrand/Havells
M&L for stepped type electronic fan regulator 100/120 Watt socket size flush type on the existing phenolic laminated sheet etc.Make:- Anchor/Legrand/Havells
M&L for ceiling rose 3 terminal PVC/Polycarbonate isolated body complete all as specified and directed. Make:- Havells/Legrand/Achor
Taking down existing burnt aluminium/ copper sub main wiring and M&L for sub main wiring with two runs of 4 Sq mm and one run of 4 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn through and including PVC double locked Casing & caping including complete all as specified and as directed. NOTE:- two runs of 4 Sq mm + one run of 4 Sq mm and one run of PVC casing & capping and its accessories of suitable size shall be measured as one unit length .Make:- Richa/ Havells/ RR Cables. Make of caping/casing/conduit :- Richa/ Prestoplast/Finolexeme
M&L for 20W LED, 4', Wall mounted LED batten with LED tuberod single/double side connection, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same on and including two Nos PVC blocks and connecting up with flexible copper cable of size 0.75 Sq mm 3 core and flexible pipe from ceiling rose to the light fitting complete all as specified and as directed. Make : Havells/ Bajaj/ Crompton/ Philip
M&L for Lamp holder , PVC/ Polycarbonate type with PVC round/square block incl 9 watt LED lamp suitable for lamp holder fittings. Make : Anchor/ Legrand/ Havells
M&L for LED 20 Watt Bldg Security light fitting, drawn through including GI bracket of 25 mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling holes as required and connecting up with flexible copper cable of suitable size and flexible pipe from ceiling rose to the light fitting complete all as specified and directed. Make Havells/ Bajaj/ Crompton/ Philips
Taking down Exh/Ceiling fan of any sweep carefully from its installed position, dismantling complete, cleaning all dust, applying grease for bearing, painting of fans complete with superior quality synthetic enamel paint by spraying including filling cavaties with filler, after cleaning all dust, reassembling the fan and blades, hanging/ fixing the fan in its original position and testing on completion complete all as specified and as directed.
M&L for rubber bush with clamping set, comprising GI bolt, nut and split pin complete all as specified and as directed.
M&L for replacement of capacitor 2.5 Mfd incl making electrical connection complete all as specified and as directed.
M&L for replacement of steel ball bearing/bush of suitable size compatible to the existing ceiling fan complete all as specified and as directed.
M&L for copper rewinding for suitable size complete to the existing ceiling fan complete all as specifed and as directed.
M&L for MCB Distribution board double door type SPN 8 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. Make : Legrand/ ABB/ Siemens
M&L for MCB Distribution board double door type SPN 4 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacity complete all as specified and as directed. Make : Legrand/ ABB/ Siemens
Supply and fixing MCB SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. Make : Legrand/ ABB/ Siemens
M&L for MCB SP 6-32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed. Make : Legrand/ ABB/ Siemensens
Taking down burnt unsv LT UG cable of any size and M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. Make : Richa/ Havells/ Polycab
M&L for spread fine river sand in trenches complete all as specified and as directed. NOTE: For measurement purpose, punned down thickness shall only be taken.
M&L for laying brick sub class 'B' old size burnt bricks for cable protection of size 230mmx115mmx75mm complete all as specified and as directed
Supply & laying tubes 'Medium grade' galvanised, with all fittings, fixed complete to walls, poles, ceilings for protection of cables of size 40 mm dia bore complete all as specified and as directed. Make:- Jindal/TATA/Prakash surya
M&L for road cutting of cement concret/butuminous road of size not less than 40mm for laying of GI pipe for cable & makng good to the disturbed surfaces by providing PCC or same material after laying of pipe line and returning filling of soil complete all as specified and as directed.
M&L for earthing complete with galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4 mm dia as earth lead connectd by means of bolts, nuts, washers and check nuts all as shown in electrical plate No 3 of MES SSR Part-I, including testing on completion complete all as specified and as directed.
M & L for GI swage and welded steel tubular pole 9 meter long 410 SP-31 confirming to IS 2713-1980 complete with cast iron base plate, finial taper plug, nuts and screws etc. complete all as specified and as directed. (Earth work and concrete foundation shall be measured and apid separately under relevant items of Sch 'A') . Make: Calcutta poles/Bansal ples/Nezone tubes Ltd.
Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. Make : Havells/Bajaj / Crompton
M&L for laying of LT UG cable, XLPE insulated, galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10 sq mm, 2 core complete all as specified and as directed. NOTE :- (i) Excavation and earth work, sand cushioning, cable protection cover, pipe etc. shall be measured and paid seperately under relevant items. Make : Richa/ Havells/ Polycab
S & F PVC strret light junction boxes of size 20cm x 15cm x 10cm with front openable shutter and locking arrangement with one 6 Amps MCB and two Nos 63 Amps rated aluminium bus bar strips fixed on porcelain insulator and fixed to pole with MS flat iron clamp 25mm x 3mm size with nuts and bolts washers, etc. complete including taking down unserviceable one all as specified and directed. Make : Sintex/Havells/Bajaj
M&L for cable connection to street light of 4 Sqmm PVC flat cable with multi standard aluminium conductors, 1100 volts grade, drawn through and including street light pole with all accessories all as specified and as directed.
M&L for replacement of HDPE pipes fisec to wall ceiling or floor of 25 mm bore complete all as specified and as directed.
SHRI HRIDAY NARAIN GIRI
SHRI RAJNATH SINGH
PERFECT BUILDERS AND SUPPLIERS
SHRI MADAN SINGH
ASHA ENGINEERING ENTERPRISES
M/S Lucky Builders
KAILASH KUMAR LADHA
Bidder Name
commercial enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .