Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹30.7 L+₹61,524.50 (2.05%)Rejected-AOC | L2 | Rejected-AOC Rejected being L2 | |
| 3 | L3₹32.2 L+₹2.1 L (6.98%)Rejected-AOC | L3 | Rejected-AOC Rejected being L3 | |
| 4 | L4₹33.5 L+₹3.4 L (11.3%)Rejected-AOC | L4 | Rejected-AOC Rejected being L4 |
Tender Value
₹27.7 L
EMD Value
₹55,500
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 867 EWS
GE 867 EWS C/O 99 APO PIN-913867
PROVISION OF STORE NEAR BUILDING NO 7-650, P-162 AND PROVISION OF COVERED PATH WAY FROM BUILDING NO P-71 TO P-72 AND P-83 TO P-261 AT PEDONG UNDER GE 867 EWS
2022_MES_558129_4
GE/867/TOKEN/47 OF 2022-23
Open Tender
Civil Works
Item Wise
150 days
KALIMPONG
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 867 EWS
₹55,500
10 Mar 2023
21 Jan 2023
13 Feb 2023
21 Jan 2023
11 Feb 2023
28 Jan 2023
21 Jan 2023 - 26 Jan 2023
Amount
Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed by EIC.
Excavation in trenches, n.exc. 1.5m wide and n.exc 1.5 m in depth; for foundation, etc. and getting out in hard/dense soil complete all as specified and directed by EIC.
M&L PCC (1:4:8) Type C2 (using 40 mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed by EIC.
M&L for Precast cement cncrete Type C-1, (1:3:6) (20mm graded aggregate) block masonry with factory made solid blocks exc 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed by EIC.
M & L for Damp Proof Course to horizontal or vertical surfaces including necessary formwork. in cement concrete (1:2:4) , 25 mm thick with using water proofing compound 3% by weight of cement by Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m, by using Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 complete all as specified and directed by EIC.
Supply of integral water proofing compound .
Returning ,filling in, including, spreading, levelling, watering and well ramming in layers not exc 25cm in hard / dense soil complete all as specified and directed by EIC.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and directed by EIC.
M&L broken stone or bounders hardcore of gauge n exc. 63 mm , deposited, spread and levelled in layers n exc. 15 cm thick , watered and rammed to a floor/true surface complete all as specified and directed by EIC.
M&L for 75 mm thick PCC (1:4:8) Type D2 (using 40 mm graded aggregate) as in sub base complete all as specified and directed by EIC.
M&L 40mm thick PCC type B-1, (1:2:4) (using 20mm graded stone agg) as in floor complete all as specified and as directed.
M&L 38mm wide glass dividing strips 3mm thick as in floors complete all as specified and directed by EIC.
M&L 10 mm thick rendering on fair faces of brick work or concrete surface in cement plaster 1:6 on external surfaces of wall finished even and fair all as specified and as directed by EIC
M&L 10 mm thick rendering on fair faces of brick work or concrete surface in cement plaster (1:6) on internal surfaces of wall finished even and fair all as specified and as directed by EIC.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces on external walls complete all as specified and directed by EIC.
M & L three coats of white wash on newly plastered surfaces including preparation of surfaces complete all as specified and directed.
S&F roof trusses, framed trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle channel or flat section) incl distance pieces, cleats, nut and bolts conforming to FE-410w (grade 250-E quality A) complete all as specified and directed by EIC.
S & F Pre-painted galvatume aluminium zince coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by EIC.
S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by EIC..
S&F Pressed steel frames of size 125x60 mm for door with one or more rebates including necessary fixing lugs, butt hings, lock strike plate etc., complete all as specified
S & F 30mm thick flush door shutters , solid core construction with black board core and plywood face panels,commercial type on both face complete all as specifiedhard & fitted to chowkats complete all as specified and directed by EIC.
S & F 250 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed complete all as specified and directed by EIC..
S & F 150mm size aluminium handle cast type anodised complete all as specified and directed by EIC.
M&L prepration of newly wooden surfaces of any description & applying two coats of synthetic enamel paints over one coat of pink primer incl prepration of surfaces complete all as specified and directed by EIC.
S & F steel windows for glazed with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by EIC.
S & F Framed work such as grills framed guard bars etc confiring to Ge 290 , 10 mm sq bar for guard bars complete all as specified and directed by EIC.
M & L 3mm thick sheet glass , ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by EIC.
Preparation of new painted steel and iron surfaces of any description and in any position over 10 cm width or girth not other wise specially described and applying one coat of Ist grade enamel paint over a coate of red oxide primer zinc chrome all as specified and as directed.
M & L RCC, (nominal mix) type B-1, (1:2:4) (20mm graded stone aggt) in lintels bands, cills and similar works all as directed by EIC.
M & L RCC, (nominal mix) type B-1, (1:2:4) (20mm graded stone aggt) in slabs sopported in walls, beams and colmns in floors, roofs landings balconies, canopies, deck slabsand in shelves and similar works etc all as directed by EIC.
M & L mild steel TMT Bars 10 mm and over cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed) not less that 0.90 mm dia or securing with chip complete all as specified and directed by EIC.
M & L mild steel TMT Bars 5mm dia and over upto and incl 10mm dia in stirrups, spacer and binders cut to length bend to shape required including cranking bending spirally for column, hooking ends & binding with and including mild steel mild steel wire (annealed) not less that 0.90 mm dia or securing with chip complete all as specified and directed by EIC.
Formwork to sides and soffits of floor or roof beam, beam hauchings, girders, lintels, cantilivers , shelves including suports, overhangs etc . Also splays between floor and beams etc complete all as specified and directed by EIC.
M&L 75 mm thick PCC type C-1, (1:3:6) (20mm graded stone aggt) as in path, plinth protection etc., complete all as specified and as directed.
Forming construction joint (dummy) joints 65mm deepx 10mm wide filled with sealing compound grade A complete all as specified and directed by EIC.
M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.
M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed by EIC.
S&F mild steel work as in tubular pipes including necessary welding or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.
Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing capping with all necessary fittings for light/fan/bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.
All as per item No 1 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board complete all as specified and directed.
All as per item No 1 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on same board complete all as specified and directed.
M&L for one 3 pin socket, outlet,15 amps, independent with cables 4 sq mm size complete all as specified and as direcetd by Engr-in-Charge.
Supply and fix switch socket combination 2 – in – one, 5 amps flush type all as specified and as directed. Make : Anchor/Havells/Plaza
Supply and fix switch socket combination 3 Pin 16A, flush type all as specified and as directed. Make : Anchor/Havells/Plaza
Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed. Make : Anchor/Havells/Plaza
Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. Make : Anchor/Havells/Plaza
Supply & Fixing Energy efficient LED tube light fitting 4", 1x18 watt, with bipin holders, connector block, CCT - 6500K, system output lumen not less than 1800lm, aluminium housing, surge protection range 3KV including connecting up with PVC insulated 3 core sheathed 0.5 sqmm copper conductor two numbers PVC mounting blocks for fixing of fitting complete all as specified and as directed by Engineer-in-charge. Make: Philips/Crompton/Havells.
Supply & Fixing LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make: Philips/Crompton/Havells.
Supply and fixing lamp holder insulated body with back plate for batten fitting complete all as specified and directed. Make: Philips/Crompton/Havells.
Supply & Fixing in LED lamp B-22 10W poly carbonate body 3 star (cat part No LED ADORE 10W B22 CDL 3 star of Havells) or equivalent in Philips/Crompton.
Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC complete all as specified and as directed by Engineer-in-charge. Make : Legrand or equivalent in Siemens/Schneider/HPL.
Supply and fix MCB, Single Pole & Neutral (SPN), 32 Amps, 240V, 10KA 'C' curve, 50 Hz, complete all as specified and directed by Engr-in-Charge. Make- Legrand, Siemens, Schneider.
Supply and fix MCB single pole (SP), 10 kA of 5 Amps to 32 Amps capacity 240 Volts. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection all as specified and directed by Engr-in-Charge. Make- Legrand, Siemens, Schneider.
Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and as directed.
Material & Labour for sand cushioning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches complete all as specified and directed. Note :- Only Punned layers shall be measured.
Supply & laying reinforced precast concrete cable cover, class LV, type 1, flat, size 250x150x40mm complete all as specified and as directed by Engr-in-Charge.
Supply and laying. jointing, testing and commissioning LT cable, XLPE insulated, PVC Bedded, galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor conforming to IS:7098, cross sectional area 10 sq mm 2 core 1100 Volt complete all as specified and directed by Engineer in charge. Make-Havells/Asian/Gloster
Material & Labour for GI tubing light grade for passing through cables under the floor along the wall or along the pole of 25mm bore and fixed to the poles/walls with suitable size of MS clamps and nut and bolts/washers etc complete all as specified and as directed.
SANJAY SAW MILL
HEM RAJ GURUNG
DEEP CHANDRA JOSHI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .