REPAIR MAINT OF FIRE FIGHTING EQUIPMENT AT AMN DUMP AND AUDITORIUM ALONGWITH OVERHAULING SERVICING OF FIRE PUMP/ STARTER/ REPLACEMENT OF PRESSURE SWITCH AND CERTAIN ALLIED WORK UNDER AGE(I) AYODHYA

S&F in repairs, gun metal Hydrant landing valve of size 63mm, single head outlet with hose coupling adaptor of size 63mm size instantaneous spring locks arrangements and blank cap complete as per IS-5290 type 'A' all as specified and directedby Engr-In-Charge

S&F in repairs, stand post made out of mild steel pipe of size 80 mm dia heavy grade of 1.2 m height and providing necessary flanges at both ends suitable for fire hydrant single outlet including flanged reducer and other fittings suitable for stand post with necessary welding to existing pipe including earthwork in any type of soil complete all as specified and directed.

S & F in repair 15 Mtr long rubber lined woven jacketed hose pipe 63 mm dia, type A (Reinforced rubber lined) as per IS 636 with necessary instantaneous spring lock type coupling at the ends to match with landing valve/hose pipe/branch pipe with S/S male and female coupling conforming to IS 903 all as specified and as directed by the Engr-in-charge.

S & F in repair first aid hose reel , wall mounted swinging type complete with drum, bracket, globe valve/ stop cock of size 20 mm dia, 30 mtr long high pressure hose reel tubing with branch pipe PVC shut off nozzle including taking down unserviceable old one complete, all as specified and as directed by the Engr-in-charge.

M&L for Hose box made of 18 gauge MS Sheet with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside for yard hydrant (suitable for housing 2 Nos Hose reel drum for 36 m long hose of size not less than 800mm X 600mm X 250mm) including taking out of Old one all as specified and directed by Engr-in-charge.

S&F Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle short including taking out of Old one all as specified and directed by Engr-in-charge.

Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purposeas per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m all as specified and directed by Engr-in-Charge

Complete removal of existing paint from existing fire hydrant stand post of any size and type at vaious location of RCI and applying two coats of synthetic enamel paint over a coat of primer as per colour code including writing 8cm size letters in white colour (FIRE) complete all as specified and directed.

All as per item No 8 above but for Hose boxes

Supply, laying welding, fixing, leak proof testing and commissioning of 150 mm bore, Heavy grade mild steel ERW pipes conforming to IS 3589 with bitumen wrap coating over the external surface of the pipe including necessary specials/fittings/washers and taking down old unserviceable pipe complete all as specified and directed. Note: Excavation and earthwork will be measured and paid seperately. Make : TATA, JINDAL,

All as per item No 10 above but for 80mm bore of pipe but conforming to IS 1239 Make : TATA, JINDAL,

Supply, install, test and commissioning of 150mm bore CI Sluice Valve in repairs, Class PN-1.6, both ends flanged and drilled type with stainless steel spindle including wheel, suitable rubber gasket for flanged joints, ISI marked, including provision of necessary jointing materials nuts and bolts, washers etc., complete all as specified and directed. Make KIRLOSKAR, LEADER, L&T,ZOLOTO, KARTAR,BIR

All as per item No 12 above but 80mm bore Sluice Valve. Make KIRLOSKAR, LEADER, L&T,ZOLOTO, KARTAR,BIR

All as per item No 12 above but 50mm bore Sluice Valve. Make KIRLOSKAR, LEADER, L&T,ZOLOTO, KARTAR,BIR

Supply, install, test and commissioning of 150mm bore Butterfly valve, ISI marked, including provision of necessary jointing materials nuts and bolts, washers etc., Including taking down old unsv one complete all as specified and directed. Make : KIRLOSKAR, LEADER, L&T,ZOLOTO, KARTAR,BIR

All as per item No 15 above but 80mm bore Butterfly Valve Make : KIRLOSKAR, LEADER, L&T,ZOLOTO, KARTAR,BIR

S&F in repairs Non return valve suitable for 80mm bore pipe heavy duty cast iron body including necessary fittings, packing material, nuts and bolts etc., complete all as specified and directed. Make : Kirloskar/ZOLOTO/Kartar,BIR

All as per item No 17 above but 150mm bore Non Return Valve. Make : Kirloskar/ZOLOTO/Kartar,BIR

Supply and fixing Danfoss Pressure switch Model No KP36 regulation range 2 to 14 bar pe complete all as specified and directed

Supply and fixing PVC Fire Hydrant Coupling Ring washers of size 63mm

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, for laying of pipes/cables/poles etc., forming bottom surfaces to required slope/gradient where pipe are laid and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L for Bailing out the water from the semi underground static water tank of capacity upto 5 Lakh litres without causing any interruption to regular water supply system and cleaning the walls, roof and floor thoroughly by using scrapper and removing the deposited scales/ fungus/ sludge/dirt etc and removing the same out of site, cleaning thoroughly with water and bleaching powder and finally with chlorine solution for complete anti bacterial disinfections including writing date of cleaning on the black back ground with white synthetic enamel paint complete all as directed.

Dismantling and strip opening the Diesel pump set of capacity 60 HP including disconnecting the suction, delivery, vaccum pipe lines and coupling for repairs to pump and refixing the same after repairs including overhauling the Engine,B check, Changing of engine oil, and minor spare parts etc as required ,arresting any kind of water leakages including testing and commissioning complete all as specified and directed

Dismantling and strip opening the Jockey pump set of capacity 12.5 HP including disconnecting the suction, delivery, vaccum pipe lines and coupling for repairs to pump and refixing the same after repairs including overhauling the pump set, renewal of gasket to pump suction and delivery lines, gland packing, greasing nuts, bolts and washers,Metal Sleeves, painting ,all kind of grinding & welding work , etc as required for arresting any kind of water leakages including testing and commissioning complete all as specified and directed

Dismantling and strip opening the centrifugal/ monoblock pump including disconnecting the suction, delivery, vaccum pipe lines and coupling for repairs to pump and refixing the same after repairs including overhauling the pump set, renewal of gasket to pump suction and delivery lines, gland packing, greasing nuts, bolts and washers,Metal Sleeves, painting ,all kind of grinding & welding work , etc as required for arresting any kind of water leakages including testing and commissioning complete all as specified and directed for the following capacities as mentioned below :

Pump 3 phase 60 HP Capacity.

Pump 3 phase 7.5 HP Capacity.

Dismantling and strip opening the centrifugal/ INDUCTION motor including disconnecting the cable connections and coupling of the motor, removing the starter and rotor units, bearings, servicing the motor assembly including cleaning the carbon deposits with carbon tetra chloride, and refixing the same after repairs including connecting up of the electric connections including testing and commissioning complete all as specified for the following capacities

Motor 3 Phase, Capcity 60 HP

Motor 3 Phase, Capcity 7.5 HP

M&L for rewinding the centifugal/ Monoblock electric motor stator or rotor with PVC insulated, super enamelled copper conductor with ‘F’ class heavy grade insulation weight and turns to achieve its full efficiency inclduing tying the winding and connecting the coils and brining the connections as that of exisitng one including applying insulating varnish, heating and backing the windings thoroughly including taking down old existing copper winding complete all as specified and directed of following capacities :-

Stator winding of Electric motor, 3 phase, 60 HP capacity.

Startor Winding of Electric Motor, 7.5 HP capacity.

Supply only the spare part of DRIVE / Non Drive End Bearing suitable for make of motor existing at site as in repairs for the following capacities of motors complete all as specified and directed :-

Motor, 3 phase, capacity 60 HP .

Motor, 3 phase, capacity 7.5 HP.

Supply only the ball bearing/roller bearing (For DRIVE/ Non-Drive End) suitable for make of pump existing at site for repairs of the following capacities of pumps complete all as specified and directed :-

Pump 3 phase 60 HP capacity.

Pump 3 phase 7.5 HP capacity.

Supply and fixing impellor of 60HP pump motor as that of existing make and model including applying grease complete all as specified.

All as per item No 42 above but 7.5 HP Pump.

Supply and fixing pump shaft of 60 HP pumpset as that of existing make and model including applying grease complete all as specified.

All as per item No 44 above but 7.5 HP Pump.

S&F MCCB 4 pole 200 Amp, 415 volt, 25 kA breaking capacity of make: L&T or equivalent in existing panel including taking out of Old one all as specified and directed by Engr-in-charge.

S&F On load Changeover 4 pole 200 Amp, 415 volt, Steel sheet enclosure of make: L&T or equivalent in existing panel including taking out of Old one all as specified and directed by Engr-in-charge.

S&F 3 pole power contactor 220/440 volts MNX 70 with 70 Amp AC3 duty rating any type including auxillary switch of make: L&T or equivalent in existing panel including taking out of Old one all as specified and directed by Engr-in-charge.

S&F , Thermal overload relays suitable for 60 HP including taking down old unsv one complete all as specified and directed.

M&L for Carefully cleaning of fuel tank for Diesel Engine of capacity 60 BHP all as specified and as directed.

Supply only Coolant for Diesel Engine complete all as specified and directed.

Supply only Lub Oil for Diesel Engine complete all as specified and directed.

S&F in repair gun metal globe or gate valve 'ISI marked' with iron wheel head screwed both end for iron pipe all as per latest IS specifications of 15mm bore complete all as specified and directed by Engr-in-charge.

All as per item no. 53 here-in-before but 20 mm bore.

All as per item no. 53 here-in-before but 25 mm bore.

All as per item no. 53 here-in-before but 50 mm bore.

S&F in repair of 15mm bore GI pipe medium grade with all fittings and fixtures complete fixed to wall/ceiling or laid in floor /trenches etc. complete all as specified and directed by Engr-in-charge. (Note - Excavation & earth work shall be measured and paid separately)

All as per item No. 57 here-in-before but 20 mm bore.

All as per item No. 57 here-in-before but 25 mm bore.

All as per item No. 57 here-in-before but 50 mm bore.

Supply & fixing in repair of DOL starter three phase 415 Volt for 7.5 HP electric motor with relay range 9-14 Amps including all fixing materials complete all as specified and directed by Engr-in-charge.

Cutting of existing MS ERW pipe in position for insertion of Fittings( NRV, sluice valve etc) Jointing , welding and making the line Serviceable for 150 mm Bore of Pipe complete all as specified and directed by Engr-in-Charge.

Supply & fixing in repair of Fully automatic star delta starter three phase 415 Volt for 60 HP electric motor with relay range 37.6-60 Amps including all fixing materials and auto start stop for fire motoor Pump with Specified Pressure complete all as specified and directed by Engr-in-charge.

Supply, installing, testing and commissioning of Monoblock pump set of capacity 7.5 HP confirming to IS-12469: 1988 consisting of Horizontally mounted centrifugal end suction type pump complete for delivery of 450 ltrs/minute against a total head of 15-30 metres with bronze impeller complete with mechanical seal including squirrel cage induction motor suitable for 415 V, 50 Hz, AC supply with suction and discharge diameter 80/80 mm and flexible coupling and coupling guard with the pump. Motor shall accept +/- 10% variation in voltage and +/- 3% variation in frequency common bed plate of fabricated mild steel channel or cast iron type complete all as specified and directed. Note: The cost of pump set , mounting bed, foundation and any earth work as per manufacturer recommendation deemed to be including in the quoted rate.