REPAIR /MAINT OF CERTAIN DRAINS, BOUNDARY WALL, FENCING, JEFFERIES WALL, PATH HARD STANDING, GARBAGE BIN ETC AND CERTAIN SHED, GARBAGE SHUTTER, ROLLING SHUTTER, IRON GATE ETC IN DOMESTIC AREA AT AF STN UTARLAI

Amount

S&F in repair steel rolling shutter (with 1.25mm thick laths) with out ball bearing as specified incl top cover anchoring rod hasp and staple and one shop coat of primer erected in position but gear operated type with bevel gear box and crank handle and Safety lever locks mild steel with 4 levers for rolling shutters including Taking down existing unserviceable, broken, rusted steel rolling shutter of any size and type and complete all as specified and directed.

S&F in repair steel rolling shutter (with 1.25mm thick laths) with out ball bearing as specified incl top cover anchoring rod hasp and staple and one shop coat of primer erected in position push pull or manual type and Safety lever locks mild steel with 4 levers for rolling shutters including Taking down existing unserviceable, broken, rusted steel rolling shutter of any size and type and complete all as specified and directed.

Taking down carefully hood and steel rolling shutter of size not exceeding 20 sqm and replacement of unserviceable/defective parts including whereever required welding work and refixing/erecting in the same opening after cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling, replacement of rusted nut bolts,brackets,handle etc, removing of bend, alignment etc to make the system smooth functional & making good the disturbed surface all as specified & directed by Engineer-in-Charge. Note :- (i) The unserviceable parts to be replaced shall be measured and paid for separately as "Supply only". (ii) Quoted rate shall be inclusive of providing missing nuts bolts, greasing, oiling, denting, tension to spring,erection and necessary welding work etc.

Supply only spring suitable for rolling shutter of area not exceeding 20 sqm each complete all as specified and directed.

Supply only bearing suitable for shaft of rolling shutter area n.exc. 20 Sqm each complete all as specified and directed. Make SKF/NBC

Supply only MS connecting anchoring rod/shaft suitable for rolling shutter area n.exc. 20 Sqm each with necessary holes for shaft complte all as specified and directed.

Supply only MS 1.25mm thick guide rail suitable for rolling shutter area n.exc. 20 Sqm each with necessary holes for shaft complte all as specified and directed.

S&F in repair safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

M&L for Taking down & refixing in same position of steel Sheet door/ gate incl necessry welding ,hinges,hold fast/handles/sliding bolt/Tower Bolt if required to be change and made to smooth function incl greasing etc all as specified and as directed. Note:- (i) Change of hinges,hold fast/handles/sliding bolt/Tower Bolt etc incl necessary welding required except steel sheet/ steel frame to be incl in quoted rate. (ii)Steel Sheet to be measured and paid seperately under respective item of schedule.

M & L for fixed in repair Mild steel, plain, black sheet of 1.25 mm thick in steel gates/hood cover to rolling shutter and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as require all as directed

Supply & fixing collapsible steel gates, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including Taking down existing unserviceable, broken, rusted collapsible steel gates and including Taking down existing unserviceable, broken, rusted steel rolling shutter of any size and type and complete all as specified and directed.

Material & labour for taking down for repairs to collapsible steel gate of size not exceeding 10 sqm, including removing and replacing worn out minor parts such as rivets, roller wheels etc. straightening of vertical channels and cleaning of rust including greasing,necessary welding if required and re-fixing the same in position complete all as specified and directed. Note: (i) The unserviceable parts to be replaced shall be measured and paid for spearately as " Supply only". (ii) Quoted rate shall be inclusive of providing missing nuts, bolts, greasing , oiling etc.

M&L for framed work ( Fe 290 gde E 165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and uides) and hanging; also fastening and fixing including dismantling of old structural steel complete all as specified and directed by Engir-in-charge.

M&L for framed work such as grills, gratings, incl for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings;and similar work conforming to Fe.290.Gde-E-165 including dismantling of old structural steel complete all as specified and directed by Engir-in-charge.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as directed. Conf to Fe-410-W(gde-E-250) including dismantling of old structural steel complete all as specified and directed by Engir-in-charge.

M&L for framed work as in roof trusses purlins rails,and fastening Beam,tee,angle, tie bar, chanels including distance pieces cleats Conf to Fe-410-W(gde-E-250) including dismantling of old structural steel complete all as specified and directed by Engir-in-charge.

S&F in repairs Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /clading to wall, fixed with self tapping screws as specified.

Supply & fix in repair Pre-painted galvalume GI based plane steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding tow wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 02mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof/ with self tapping screws as specified.

S&F in repairs 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc as in roof covering /clading to wall, fixed with with L-type /J-type or cranked hook bolts self tapping screws as specified.

M&L for Cutting holes into stone wall built in cement mortar or cement lime mortar for inserting hold fast and making good dismental portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n exc one brick as required all as directed by Engr-in-Charge.

M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members n exc 04 kg/Sqm complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of old steel surfaces and applying one coats of synthetic enamel paint complete all as specified and directed

Material & labour for running welding in repairs, thickness of metal to be welded not exceeding 6mm complete all as specified & directed.

Demolition of Brickwork or stone/boulder masonry and precast block masonary for ashlar facings,dressed stonework, precast concrete articles and precast concrete block walling built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, complete all as directed.

M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete all as directed.

M&L rendering 15 mm thick, in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cemencomplete all as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

S&F for glazed ceramic tiles, coloured, 300mmx 450mm x7 mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces including dismantling of old floor, hearth and wall tiling complete all as directed.

Excavation in post holes(or similar holes) in any type of soil each n exc 0.5 cum each getting out, and removing surplus soil to a distance nexc 50m and making good surface complete all as specified and directed.

M&L Cement concrete (1:3:6) type C2 (using 40 mm graded aggregate as in foundation of post, filling and mass concrete complete all as specified and directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0 E-165 including dismantling of old post & struts of any section complete all as specified and directed.

S&F chain link MS galvanised fencing including line wires of size 4mm dia GI wire any type of standards, rails straining bolts, etc including provision of binding wire including dismantling existing fencing of any size and position complete all as specified and directed.

Supply & fixing in repairs MS round bar 10mm dia and over for line wire to chain link fencing etc complete all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed wire with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolt , including securing or lying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed incl dismantling old broken/rusted barbed wire of any dia and remove from site complete all as specified and directed.

S&F MS screw bolt (machine made) with hexonal or screwed head at one end and screwed the other end, and fitted with washer and one hexagonal or square nut n. exc 5cm long and 5 mm to 10mm dia bolt complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrom primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n.exc.10cm in width or girth and when unconnected with other painting or when painted in a different tint applying two coats of synthetic enamel paint over a coat of red oxide zinc chrom primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M & L precast cement concrete block masonry type C1, 1:3:6 (using 20 mm graded stone aggregate) with solid block or slab 10 cm thick and setting in mortar 1:4 all as specified.

M&L rendering 15 mm thick, in CM (1:4) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished even and smooth without using extra cement complete all as specified and directed.

S&F mild steel work conforming to Fe 310-0 or Fe 410-0 in hold fasts of flat iron ,hooks,pintle hinges,cleats hand made sliding bolts and smilar items including dismantling old strucural steel work complete all as specified.

M&L for preparation of old decorated plastered surfaces of walls and applying one coats of cement base paint complete all as specified and directed.

M&L Providing precast ce- ment concrete type B1 1:2:4 using 20mm agg as in copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any sectionindicated), with plain fair faces, including chamfers,weatherings, throat- ing etc. and setting in mortar 1:6 complete with joints to match all as specified and directed.

M&L for providing precast cement concrete Type BO 1:2:4 (using 12.5mm agg) as in louvres and jallies,35mm thick (measured solid), including allmould- ings complete all as specified and directed.

M&L for providing & Laying, cement concrete Type B0 1:2:4 type (12.5mm) graded graded graded aggregate) in benching, Coping all as directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specificaqlly provided for and removing debries outside of MOD land as directed.

Demoliton of reinforced cement concrete of any description & in any position not otherwise specifically provided for and removing debries outside of MOD land as directed.

Form work to sides of concrete foundations, footings, bases of columns and raft beams, side and soffits of foundation and plinth beams of rough finished surfaces of concrete

Formwork to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Square, rectangular or polygonal

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat

M&L for Reinforced cement concrete (nominal mix) in Type B1 1:2:4(20 mm graded aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; and mass concrete all as specified and direcetd.

M&L for Reinforced cement concrete (nominal mix) in Type B1 1:2:4(20 mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span all as specified and direcetd.

M&L for Reinforced cement concrete (nominal mix) in Type B1 1:2:4(20 mm graded aggregate) as in Columns, pillars, piers, posts and struts all as specified and direcetd.

M&L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes/septic tank/soak well etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc all as specified. (Reinforcement shall be measured and paid for separately).

M&L for mild steel TMT bars 10 mm dia and above, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Ditto as per Item No Above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore,including packing under and completely surrounding pipes with concrete after they are laid and tested; specified and as directed.

M&L for 150 mm bore reinforced concrete pipes class NP2, laid and jointed with collars including demolition and breaking up drain pipes complete all as specified and directed.

Demoliton of cement concrete(unreinforced) of in ground floors and pavings n exc 15 cm thickness (below or above ground level and removing debries outside of MOD land as directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as sub base all as specified and directed..

M&L for 100mm thick cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in floor finishes and paving.

M&L for rubber moulded vibratory compacted (ISI Marked) coloured precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment with 25mm thick sand cushining incl dismantling of old unsericeable tiles and rubbish off the premises complete all as specified and directed.

M&L for rubber moulded coloured Chequered cement concrete tiles with grey cement and pigment 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including 15mm thick screed bed in CM 1:6 complete all asincl dismantling of old unsericeable tiles and rubbish off the premises complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete incl demolition and rubbish off old unserviceable kerb stone set in cement mortar and cement lime mortar complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of primer on new concrete surface of any desc over 10cm width or girth,not otherwise described incl prep of surfaces complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old concrete surfsce of any desc over 10cm width or girth,not otherwise described incl prep of surfaces complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 ( using 20mm graded agg) as in flooring complete all as specified and directed.

M&L for Providing and laying Cement concrete 1:2:4 type B0(using 12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggt) as in plinth protection including forming groove 10 mm wide & 30 mm deep & filled with bitumenous filler complete all as specified.

Supply and fix in repairs galvanised punched tape concertaina coil of 1050 mm dia (dia of coil when unstrached) and 2.6mm dia of core wire and shall not be less than 78 Nos of Spiral in each 10RM length when laid and fixed on Y or U shaped angle iron with 3.15mm dia GI wire complete all as specified and directed.

M/S Tanisha Traders

KRISHNA CONSTRUCTION COMPANY

National Rewinding Works

Aggarwal brothers and company

M/S TANUSHREE CONSTRUCTION COMPANY

M/s godara infratech and power industries