ADDITION ALTERATION TO GROUND FLOOR ROOMS AT CERTAIN BUILDINGS AND PROVISION OF HARDSTANDING PARKING OPPOSITE MES PUMP HOUSE AT VARUNAPURI AND PROVISION OF PATH HARDSTANDING NEAR BLDG T 34 T 35 AND T 36 NEAR RAM MANDIR AT DCRA GOA UNDER AGE B R II

Amount

ADDN / ALTRN TO GROUND FLOOR ROOMS OF CERTAINS BUILDINGS AT SMA VARUNAPURI, UNDER GE (NW) VASCO (B/R-II Portion)

Cutting opening in cement concrete walls (any description) for door, window and other openings (with or without reveals and reinforcement) or enlarging existing openings, including trimming surfaces to receive rendering.

M&L Precast cement concrete block masonary 1:3:6 type C-1, using 20mm graded stone aggregate with solid blocks exc 10cm in width and setting in mortar 1:6 complete.

M & L for Providing, precast cement concrete 1:2:4 Type B1 (20 mm graded stone agg), for kerb wall, blocks (foruse with masonry), string courses, copings, kneelers, apexstones, or similar work chamfered or round on edges all as directed.

M & L for RCC (Nominal mix) 1:2:4 type B-0 using 12.50mm graded aggregate as in slabs supported on wall, beams and columns in floors roofs, landing, balconies, canopies , deck slabs and in shelves etc and the like.

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (and welded to existing reinforcement of any description and any position of RCC structure after binding with mild steel wire annealed n less than 0.9 mm dia as an addl bar complete all directed) (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M & L formwork to soffits of suspended slabs such as roof slabs, landing and similar works n.exc 200mm thick horizontal or sloping for rough finished flat surfaces

M & L rendering 10 mm thick in CM 1:6 on concrete solid block wall internal surface finished even and smooth without using extra cement.

M & L rendering 10 mm thick in CM 1:4 on concrete solid block wall external surface finished even and smooth without using extra cement.

M & L Preparation of new plastered surface and applying two coats of weather proof high glove antifungal paint on external surface with suitable primer

M&L preparation of surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint.

M&L granite (of any type) tiles 18-20 mm thick machine cut in dado / skirting / riser of steps, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing in steps of stair case and vertical surface of wall.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and as directed by Engineer- in Charge..

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

M&L Preparing new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of Red oxide, zinc chrome primer complete.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in fdn, filling and mass concrete

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness below or above ground level complete.

S&F curtain rails 19mm dia stainless steel with brackets stops rollers etc fixed in repairs.

S&F brackets (decorative type) for SS curtain rail .

M&L CPVC pipes SDR 11 Class 1 laid in trenches/walls outer dia 20mm dia including all fittings

S & F 50 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/ Sq. Cm., fixed complete to walls, ceilings or in floors etc.

S & F in repair of Bib taps (15 mm)cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule and fixed but fancy type

S & F in repairs stop valves cast copper alloy 15 mm, screwed down, high pressure with crush or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type chromium plated

S & F of SS Towel ring round with round flange of good quality as approved by GE.

S & F of SS Soap dish holder of good quality as approved by GE.

S & F in repair Health faucet with tube with min length of tube 1 m and holder of chromium plated.

S& F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union

S & F in repairs , toilet paper holder with flap of Stainless steel as per directed by Engineer-in-Charge.

M & L waste coupling of PTMT 32mm/40mm bore fixed in repairs

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth in stone concret block or slab walls.

M&L UPVC pipe (SWR), 75mm bore, single socketed, in any length with rubber ring joints, fixed to walls

S&F UPVC (SWR) 110mm bore '-ditto- as above.

S&F UPVC (SWR) bends 75mm bore any radius dismantling pieces or tapers

All as in item No above (1.33) above but 110mm bore

S&F 110 mm dia UPVC (SWR) vent cowl.

M & L preparing the old treated surfaces of wall and applying one coat of exterior grade water proof antifungal paint complete all as per manufacturers instructions and as directed

S & F PVC connections, 450 mm long with brass CP check nuts suitable for connecting 15 mm dia pipes, superior quality, fixed in repairs.

S&F Wash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings.

Supply only Pillar tap of PTMT 15mm dia any colour high pressure screwed for iron/CPVC pipe fixed to new wash hand basin.

S&F PVC valveless, syphonic action type flushing cistern, low level , white, with inlet ball valve, float and handle including brackets 10 litres capacity.

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete.

S & F Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm

S&F 200 ltr capacity PVC Loft Tank of rectangular type suitable to fix in kitchen of bldgs complete all as specified and as directed. .

S&F CPVC tank adaptor 20mm bore fixed to PVC tank complete.

S & F in repair SS plate rack with rust proof finish, made from stainless steel - Grade AISI 430 (Size and make as approved by Engineer-in-Charge)

S&F powder coated aluminium door and window shutter and frame any type (sliding or openable) and other similar work etc 60 micron section, fabricated by using the JINDAL / INDAL / HINDAL CO / CENTURIAN sections including all necessary roller wheels for window, cleats, handle, door stoper locking arrangement and arrangements to received glass/ prelaminated particle board with aluminium beading and stainless steel screw incl cost of rubber gasket beadings etc complete sealing between frame & wall with epoxy sealing compound. (The weight of rubber gasket beading will not be measured with the weight of aluminium shutters, glass and prelainated particle board will be measured and paid seperately) All sections as approved by GE

S&F sheet glass ordinery quality, 4mm thick and glazing with oil putty/wooden beads in squars n exc 0.5 sqm each.

S&F 4mm thick sheetglass ordinary quality exceeding 0.5 sqm each pane

M&L figured glass 3mm tick ordinary quality glazing with oil putty in squares not exc 0.5 Sqm in each pane.

S & F Aluminium alloy wire mesh, 0.45 mm dia of wire and average width of aperture 1.40 mm and fixed with stainless wire staples

S&F Powder coated aluminium grill of design DG-104 pattern, made out of 10mm dia rod fixed with and including stranded aluminium frame of 'F' section of size 23.4x15.3x1.4 mm thick all as per manufacturer's instructions complete all as specified and directed

S & F Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for top rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. supplying and fixing in the frame at site as per specification & drawing

All as per item no. 1.54 but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly

S&F SS Butt hinges medium weight cold rolled 100mm size.

S&F aluminium anodised barrel tower bolts of extruded sectin 150mm long.

S&F extruded aluminium alloy, fabricated type handle, anodised 150mm long

M&L rendering 10mm thick in CM 1:4 on brick work/ concrete surface to receive tiles

M&L screed bed or bedding layer of mortar 15mm thick to rceive floor tiles in cement plaster 1:4

S & F glazed ceramic tiles, coloured of size 300 x 200 x 7 mm thick with on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white cement to match all as specified.

S & F Non skid coloured tiles of 7 to 8mm thickand area of each tile exc 0.06 Sqm and n,exc 0.11sqm in floors etc, set and jointed in neat cement slurry and pointed in White/coloured cement to match all as specified.

ADDN / ALTRN TO GROUND FLOOR ROOMS OF CERTAINS BUILDINGS AT SMA VARUNAPURI, UNDER GE (NW) VASCO (E/M-II Portion)

M & L Point wiring complete with 1100volt grade PVC insulated unsheathed multistranded 1.5 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC casing and capping medium grade of size 25/20 mm, etc fixed on wall/ceiling including provision of 1.5 sqmm PVC unsheathed copper conductor as earth conductor and connected to earth dolly, including provision of pressed steel terminal box with 3mm thick plastic laminated sheet top cover for housing switches,sockets etc concealed on wall complete all as specified and directed.

(a) One light point controlled by one switch

(b) One fan/exhaust fan point controlled by one switch & regulator

(c) One call bell point controlled by bell push

(d) one 3 pin socket outlet, on the same board socket 5 Amps point with other switches with cable 1.5 sqmm

(e) one 3 pin socket outlet, 5 Amps on independent board.

All as per item No 1.64 above but complete with 1100volt grade PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable through casing and capping of suitable size and one run of 2.5 sqmm copper cable as earth continuity conductor including connecting with earth dolly for 15 Amps socket outlet on independent board.

S & F switch piano flush type single pole 5 Amps one way.

S & F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal.

S & F Switch socket combination 5 in 1 pin 5 / 16A, flush type.

S&F bell push, flush type, 230 volt, 50 HZ ,AC supply.

S&F Ding dong Bell, AC, 230 volts, single pole 50 HZ AC supply.

S & F ceiling rose three terminal 230 volt 50 HZ AC supply.

M & L for submain wiring with 1100volt grade PVC insulated unsheathed multistranded 02 run of 06 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC CONDUIT 25 mm dia in Ivory/Grey colour medium grade etc fixed concealed on wall/Roof including provision of 01 run of 6.0 sqmm PVC unsheathed copper conductor and connected to earth dolly complete all as specified and as directed. Note :- 02 run of 06 sqmm and 01 run of 6.0 sqm including 01 run of Pvc conduit will be measured as one length complete all as specified and directed .

Supply and fix MCB DB, single pole and neutral with suitable Amps rated busbar double door 8 way 230 volt 50 HZ AC Supply complete all as specified and directed. Make. L&T/Legrend/HPL

S&F MCB SP 06 to 32 Amp 230 volts,50Hz,Breaking Capacity 10 KA complete all as specified and directed.

M&L for RCCB Double pole, 30mA 25 Amps 230V 50Hz AC complete all as specified and as directed.

S & f in repairs 1 Phase KWH Meter, electronic type 5-30 Amps tamper proof Including single phase meter box and connecting cable complete all as specified and as directed. Meters number along with Qtr No & Initial Reading will be provided in tabulated form.

Fixing only LED tube light fitting 1x18/20watt with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed

Fixing only LED tube light fitting 1x 9/10 watt with all accesories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Note: For Item No. 1.82 and 1.83 LED Tubelights will be provided under Schedule 'B' as free of cost for fixing from the Department.

S & F deluxe stepped type electronic fan regulator deluxe type on the phenolic laminated sheet complete all as specified and as directed

S&F lamp holder, PVC/polycarbonated type with back plate suitable for batten fitting including 9 W LED lamp -01 Nos complete all as specified.

S & F Ceiling fan 1200mm sweep 230V, single phase Energy saving with 5 star rating model with ISI Mark.

Supply and fix in repair of Exhaust fan (Square type) 230V single phase plastic body, sweep size (mm) 250 connecting up including provision of louver and necessary wall opening and connected cement works and cable from ceiling rose or connector to exhaust fan etc complete all as specified and directed.

Supplying and fixing Tubes 50 mm dia medium grade galvanised with all fittings and cutting with fixed both ends on wall for fixing of ceiling fans including GI Clamp with nut bolt, necessary extension rod and making hole to wall all as specified and directed. Note:- The quoted rate shall be inclusive for pipe cutting and making of hole for cement and same colour wall finished.

PROVISION OF HARDSTANDING / PARKING OPPOSITE MES PUMP HOUSE AT VARUNAPURI

Excavating over areas , n.exc 1.5 m in depth and getting out in soft/disintegrated rock.

M & L for Rolling and consolidating formations in cutting and filing using 8 to 12 tone power roller including side berms.

M & L soling (or sub base) 150mm thick with broken boulders in quarried stone, intersrices filled, surface formed and rolled and consolidated to required gradiebt and camber

M&L WBM 150mm thick (two layers of 75mm thick compacted thickness) with coarse aggregated of grading (63 to 40mm size) spreaded, rolled and consolidated to gradient and camber as required using granite trap or Baralt.

M&L applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sqm usingpaving bitumen.

M & L premix bituminous, macadam 75mm thick (consolidated thickness) laid/rolled and compacted to required gradient and camber using binder content of paving bitumen any penetration @ 4% by eight of total mix.

M&L Bituminous premix asphaltic semi-dense concrete 40mm consolidated thickness with 5.5% binder content with paving bitumen any penetration by weight of total mix, rolled and compacted to required camber and gradient.

M&L for hardcore (broken stone or boulders) of gauge n exc 63mm deposited, spread and levelled in layers n exc 15cm thickness watered and rammed to a true surface

Removing excavated material (rock/ soil) exc 250 mtr but not exc 500 mtr and depositing where directed.

M&L precast cement concrete block masonry 1:3:6 type C-1, using 20mm graded stone aggregate with solid blocks exc 10cm in width and setting in mortar 1:6 complete.

M &L RCC 1:2:4, Type B1 (using 20 mm graded agg) Nominal Mix in Foundations, including rafts, footings, foundation beams; plinth beams, slabs; bases forcolumns, etc.; basement slabs, under-reamed piles and mass concrete

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape requred, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (and welded to existing reinforcement of any description and any position of RCC structure after binding with mld steel wire annealed n less than 0.9 mm dia s an addl bar complete all directed) (annealed) not less than 0.9mm dia or securing with clips complete all as specified. (also bent to shape reqd and welded to existing reinforcement of any description and any position of RCC structure

M&L rendering 10mm thick in CM (1:4) on fair faces of brick work, finished fair and even without using extra cement.

Preparing newly platered surfaces of wall and applying two coats two coats of colour wash over a coat of white wash all as specified.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick with rough finished surface

PROVN OF PATH / HARDSTANDING NEAR BLDG T-34, T-35 AND T-35 NEAR RAM MANDIR AT DCRA (GOA), UNDER GE (NW) VASCO

Excavation over areas, n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.

M&L 100 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in sub base

M&L laying sand for cushionbed including spreading levelling in layers n.exc 50mm thick, watering and consolidations for paver blocks all as specified and as directed.

M&L for laying rubber moulded machine pressed precast concrete interlocking coloured paver blocks of any shape and size confirming to IS 15658-2006 of 80mm thickness with grey cement and cement M-40 grade

M&L precast cement concrete block masonry type B1, 1:2:4 (20mm graded agg) with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete.

Removing excavated materials exc 1.50 km but n.exc 5 km and deposited where directed

M&L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

NOTE :- SIMILAR ITEMS OF ALL WORKS HAS BEEN CLUBBED)

Ramesh Enterprises

K M SUBHANAIAH

SHIVRAJ CONSTRUCTIONS

M/S DUBAL CONSTRUCTION

Leela Enterprises

SACHIN CONSTRUCTIONS

M/S jvsr constructions

M/S P S BABU