LIFT - GH AT UTHIRAMERUR

Amount

Design, Engineering, Supply, Fabrication, Erection, Testing, commissioning and handing over of 1 no 20 Bed-Cum passenger lift as per the following specifications including taxes and duties.(Gearless lift with machine room) (1)Location: Govt. Hospital, Uthiramerur, (2)No. of lift: one no. (Gearless), (3)Type of lift: Bed-Cum passenger, (4)Capacity of lift: 20 persons / 1360 Kgs, (5)Speed: 1.0 M / Sec, (6)Type of drive: V3F drive with enhanced ride comfort and near zero level functions, (7)No of floors: GF+1 Floor, (8)Total travel: 3.3 mts x 2 Landing = 6.6 mts, (9)Leveling accuracy: high level accuracy with smooth and jerk free stopping, (10)Construction of CAR: No. 4 hardened sheet high quality stainless steel car and hand rail granite flooring and Perspex false ceiling, (11)Position of machine: directly above the lift well, (12)No of landing service: One in the front side- 1 no., (13)No. of car entrance: one in the front side only, (14)Car entrance door: power operated automatic V3F drive center opening sliding SS door, (15)Landing entrance door: power operated V3F drive center opening sliding SS door with provision for emergency exit key at all landings, (16)Lift well :2700 mm (wide) X 2500 mm (depth) as per IS 14665(part1) 2000 to be constructed by PWD civil wing, Contd.....

(17)Lift pit depth:1600 mm, (18)Car inner size: 1400 mm (width)x2150 mm (depth) as per IS 14665 (part 1 )2000,over head 4200mm and Total weight of person – 680 Kg., (19)Car clear opening: 1100 mm wide x 2000 mm height as per IS 14665 (part 1)2000, (20)Lift machine room size: as per ISI 14665 (part 1)2000 to be constructed by PWD civil wing over the lift well, (21)Power supply: 400 / 440 v three phase 50 Hz AC supply for power and 230 V 50 Hz single phase power supply for light, (22)Control: micro computer (micro processor):based simplex collective control with / without attendant, (23)Car fittings: CFL lighting with 1 no 300 mm sweep cabin fan, (24)Lift well: RCC construction with brick masonry to be constructed by PWD civil wing, (25)Induction: UP / DOWN digital direction and position indicator for all landings and inside the car. (26)Emergency alarm bell: battery operated bell to be provided with automatic charging device, (27)Emergency light: battery operated light to be provided with automatic charging device, (28)Fire mans switch: to be provided at the GF, (29)Minor builder works: to be provided by the lift contractor, (30) Scaffoldings: to be provided by the lift contractor, (31)Sill angles and facia plates: SS to be provided by the lift contractor, (32)Steel for lift machinery: to be provided by the lift contractor, Contd.....

(33)Servicing and maintenance: free comprehensive servicing and maintenance for one year Guarantee period to be provided by the lift contractor, (34)Automatic rescue device: to facilitate the landing of the nearest floor at the time of power failure this shall consist of suitable battery system with charger inverter under voltage protection system etc. complete with all accessories, (35)Provision for intercom with phone: to be provided by the lift contractor, (36)Lift license: preparation of drawings payment of charges to CEIG and insurance policy if any and obtaining CEIG approval for the lift as per lift act should be done by the lift contractor, (37)Floor position announcer: to be provided by the lift contractor, (38)Special features : (a) Infra red door sensor with full height screen, (b)Full width half height rear panel mirror, (c)Tubular SS hand rail in car, (d) Stainless steel signal features, (e) Vandal proof SS button with SS cover, (f) SS door frames for landing door, (g) V3F door operator, (h) Call register signal, (i) Stainless steel facia plates for car operating panel and landing fixtures, (j) Steel ladder for lift machine room, (k) On / off switch for fan and light, (l) Over load warning indicator with audio announcer, (m)Voltage stabilizer for control circuits, (n)Braille button. All the features as per differently abled person act should be provided. Contd......

2 hurs five retandent landing doors. (39)Over speed governor phase failure and phase reversal relay alarm bell T guide brackets for car and counter weight rubber padding under the winding unit motor of adequate capacity signal reduction worm gear electromagnetic brake with compression springs car safety gears buffers electro mechanical locks emergency key side supporting angles motor over load protection devices final limit switch main suspension ropes counter weight lifting joist for mounting the machineries, (40)Guarantee: guarantee at least for one year for the material and workman ship of equipments should be offered by the lift contractor, (41)Site testing in accordance with IS 14665 should be carried out at the time of handing over to the user department, (42)Supply operation and maintenance manual and necessary tools for operation and a set of Spare parts required for one year.

Wiring with 2x1.5sq.mm. (22/0.3) PVCinsulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVCaccessoriesandwithTWswitchboxand5AFTswitchwithpainting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil)

Supply and fixing of single box type 4'20W LED fitting with TW round blocks on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting.

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL.

Supply and fixing of 1 No. 5A (3 pin and 2pin) combined flush type wall socket and with control switches concealed in TW box covered with Hylem sheet in flush with wall with earth Connection.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 63A FP MCB in flush with sheet enclosure in Synthetic Moulded Compound Box

Supply and fixing of 100A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only

Supply and run of 2 of 2.5sqmm (36/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with contiinuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour

Supply and clarnping of 3.5x70sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.

Supply and frxing of brass cable gland for 3 1/2x70sqmm PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2x70sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall and ceiling for earth connection

Renewal by Supply and fixing of 70W LED Street Light fitting complet with 32mm dia GI pipe (Class B) with 1no 32mm GI bend complete on the existing post/ wall with SMC box with 16A fuse unit with PVC unsheathed copper leads from fuse carrier to the fitting, MS clamps and aluminum painting with including necessary labour Havels / Philips / Equivalent)

Supply and Installation of 4MP IP bullet Camera ,WDR 3.6 mm Fixed lens.Make:Hikvision/Eq.Model No: DCS-F4714

Supply and installation of 16 channel Network Video recorder

Supply and Installation of 16-port poE 2 Gigabit managed switch, which supports

Supply and Installation of 6U wall rack, with front glass door with lock and key facilities

Supply and Installation of 4U wall rack, with front glass door with lock and key facilities

Supply and Installation of 4TB built in Hard Disc Drive.Make: Seagate/Eq.

Supply and laying of CAT6 cable in existing 1” PVC pipe .Make:D-link / Eq.(Data-R68)

Supply and Installation of 1 KVA Online UPS

Supply and Installation of 43' inches LED TV with following features:1. USB Input 2.HDMI Port 3.Clear audio+

Supply and fixing of digital ISDN EPABX system with 40 Nos of analog extension 8 nos.of digital junction 350 nos.of expandable port 2 Nos. operator console and compliable ISDNQ IP net working system specification for PCM/TDM Technology 32 bit microprocessor caller id on digital and IP as well as analog extension ISDN PRI/BRI boss secretary feature operator console for multilingual menu driven and keys name display on LCD.

Supply, fixing and termination of RJ11 I/O box with face plate and back box for LAN. Make: D-Link/Eq.

Supply, fixing and termination of 50 pair DB with krone module and necessary connections.

Supply, fixing and termination of 10 pair DB with krone module and necessary connections.

Supply and laying of 0.5mm 20 pair telephone cable with suitable PVC pipe make: Delton/ eq.

Supply and laying of 0.5mm 10 pair telephone cable with suitable PVC pipe. make: Delton/ eq.

Supply and laying of 0.5mm 2 pair telephone cable with suitable PVC pipe. Make: Delton / eq.

Supply and Installaion of caller ID telephone instrument. Make:Betel/Eq.

U.S. ELECTRICALS

SS AGENCIES