Procurement of Kitchen Equipments

Amount

FOUR BURNER RANGE WITH UNDERSHELF (LxWxH = 750x750x850 +150 ) SS 304 16 g top front & both side turned down 50 mm and in 12 mm. rear side raised splash of 150 mm high, & 32 x 32 x 3 mm ss angular framework fully welded. 4 nos. 350x 350 mm, heavy duty cast iron removable vessel rest. 2 nos G-9 burners & 2 nos T-35 burners, 2 no pilot with control. 25 x 25 x 3 mm ss angle with center 16G SS sheet with center hole to be used for mounting burners. 20G 304 SS spillage tray with ss formed handle. 25 x 25 x3 mm SS angle to be provided for sliding spilage tray. One no 18G 304 SS bottom shelf with HAT type 18G SS channel support of size 75 x 37 x 12mm, starting at 150 mm height. corners of shelves shall be cutout and shall be fully welded to the centerline of legs. all ends shall be closed, welded, ground and polished smooth. legs four no's ss 304 16G ø 38 mm tubular legs with adjustable. nylon bullet feet.

WORK TABLE WITH 2 UNDER SHELF AND REAR SPLASH (LxWxH = 1900x700x850+150) Constructed of 16G 304 SS top, double beeded on three sides 50 mm down, 15 mm in &150 mm high raised splash adjacent to wall, returned 25 mm at 90° and turned down 12 mm. Top reinforced with welded SS channel support on sides and center of size 12 x 46 x 75 x 46 x 12mm or 32 x 32 x 3 mm SS angle frame, Two nos 18G 304 SS bottom shelf with hat type 18G 304 SS channel support of size 12 x 37 x75 x 37 x 12mm, starting at 150 mm height and the next shelf at equidistance. Four nos dia 38mm 16G 304 SS round pipe uprights with nylon adjustable bullet feet.

2 TIER WALL SHELF (LxWxH = 1900x300x300) Constructed from 18G 304 SS Sheet 3 sides up by 25 mm and hemmed 12 mm inside & front side down by 25 mm & 12 mm in. 2 Shelves are assembled with 32 x 32 x 3 mm 304 SS angle at all four corners and 300 mm clearence between the shelves. Wall mounting provision holes are povided at rear side of the wall side angle.

TILTING WET GRINDER, CAP: 15 LITERS (LxWxH = 765x565x1100) SS Drum, SS Frame with SS pipe handle for tilting

WORK TABLE WITH 2 UNDER SHELF AND OHS (LxWxH = 1200x900x850+600) Constructed of 16 G 304 SS top, double beeded on three sides 50 mm down, 15 mm in &150 mm high raised splash adjacent to wall, returned 25 mm at 90° and turned down 12 mm & reinforced with welded SS channel support on sides and center of size 12 x 46 x 75 x 46 x 12mm or 32 x 32 x 3 mm SS angle frame, Two nos 18 G 304 SS bottom shelf with hat type 18G SS channel support of size 12 x 37 x75 x 37 x 12mm, starting at 150 mm height and the next shelf at equidistance. 1 no. 18G SS 304 detachable OHS with 25mm dia 16G SS 304 pipe support with vati fittings at 600mm from table top. Four nos dia 38 mm 16G 304 SS round pipe uprights with nylon adjustable bullet feet.

2 TIER WALL SHELF (LxWxH = 1350x300x300) Constructed from 18G 304 SS Sheet 3 sides up by 25 mm and hemmed 12 mm inside & front side down by 25 mm & 12 mm in. 2 Shelves are assembled with 32 x 32 x 3 mm 304 SS angle at all four corners and 300 mm clearence between the shelves. Wall mounting provision holes are povided at rear side of the wall side angle.

SS STORAGE RACK (5 TIER) (LxWxH = 1200x600x1800) 5 Nos of SS 304 18 G Shelves, all side turned down 32 mm and in 12 mm. Underside of shelves reinforced with 12 x 28 x 75 X 28 X 12 mm 18 G 304 SS inverted hat type channels. Cutout on all corners of shelves and to be welded to the centerline of uprights. All ends closed, welded, ground and polished smooth. Four no's of dia 38 mm 16 G 304 SS tubular upright with adjustable nylon bullet feet. Top end of the uprights should be closed with nylon end cap.

SS STORAGE RACK (5 TIER) (LxWxH = 1200x550x1800) 5 Nos of SS 304 18 G Shelves, all side turned down 32 mm and in 12 mm. Underside of shelves reinforced with 12 x 28 x 75 X 28 X 12 mm 18 G 304 SS inverted hat type channels. Cutout on all corners of shelves and to be welded to the centerline of uprights. All ends closed, welded, ground and polished smooth. Four no's of dia 38 mm 16 G 304 SS tubular upright with adjustable nylon bullet feet. Top end of the uprights should be closed with nylon end cap.

MASALA TROLLEY (6 CONTAINERS) (LxWxH = 450x750x850 ) The unit should be like a table trolley designed with 16G SS 304 top, double beeded on all sides 50mm down, 15 mm in, reinforced with SS angle frame of size 32 x 32 x 3 mm thick with cut out to fit six round containers of size 150MM dia and 150mm deep 304 SS 18G round container with lid for storing spices to be supplied with the unit. Unit to be fitted with heavy duty noise free castors of 100 mm dia with two castors having locking facility. The trolley should have 32 mm dia G 16 SS 304 pipe upright with 25 mm dia 16G 304 SS pipe handle on one side.

MOBILE WORK TABLE WITH 2 UNDER SHELF (LxWxH = 1200x600x850 ) Constructed of 16 G 304 SS top, double beeded on all sides 50 mm down & 15 mm in and reinforced with welded SS channel support on sides and center of size 12 x 46 x 75 x 46 x 12mm or 32 x 32 x 3 mm SS angle frame, two nos 18G SS 304 bottom shelf with hat type 18G 304 SS channel support of size 12 x 37 x 75 x 37 x 12mm, starting at 150 mm height and the next shelf at equidistance. Four nos. dia 38mm 16G 304 SS round pipe uprights and the unit to be fitted with heavy duty noise free castors of 150 mm dia with two castors having locking facility.

SPREADER TABLE WITH CROSS SUPPORTS (LxWxH = 950x450x850+150 ) Constructed of 16G 304 SS top, double beeded on all sides 50 mm down and 15 mm in, and reinforced with welded SS channel support on sides and center of size 12 x 46 x 75 x 46 x 12mm or 32 x 32 x 3 mm SS angle frame. with dia 25 mm 16G 304 SS pipe cross bracing on three side & nylon adjustable bullet feet.

2 BURNER COOKING RANGE (LxWxH = 1200x750x850+150 ) SS 304 16G top front & both side turned down 50 mm and in 12 mm. rear side raised splash of 150 mm high, & 25 x 25 x 3 mm ss angular framework fully welded. 2 nos. 350x 350 mm heavy duty cast iron removable vessel rest provided at center. 2 nos G-9 burners with 1 no pilot with control. 25 x 25 x 3 mm ss angle with center 16G SS sheet with center hole to be used for mounting burners. 20G 304 SS spillage tray with ss formed handle. 25 x 25 x3 mm SS angle to be provided for sliding spillage tray. four no's Dia 38 mm 16G 304 SS tubular uprights with dia 25 mm 16G 304 SS cross suuport on three sides and adjustable nylon bullet feet.

STOCK POT BURNER (LxWxH = 600x600x600 ) Top made out of 16G 304 SS double beeded 50 mm & 12 mm on all side with opening for providing cast iron vessel rest of size: 350 x 350 mm. Frame structure madeout of 32 x 32 x 3 mm thk SS angle frame with 40 x 40 mm 16G 304 SS Sq. pipe uprightsof height 600 mm with 150 mm height cross support of 25 x 25mm 16G 304 SS Sq. pipe. Body all three sides claded with 20G SS 304 with louvers with airventilation. Front 18g 304 SS removable control panel with needle control valve, bottom 20G SS 304 drip tray with formed SS 304 handle. One pair of 25 x 25 x 1.5 mm SS angle to be provided for sliding drip tray. 1 no G-8 / T-35 burners with pilot to be provided with the unit.

2 DOOR VERTICAL REFRIGERATOR (LxWxH = 700x820x2050 ) 550L,-2~+10,ambient temp is 43 °C :S.S 304 Grade inside & outside (including back side),2 small doors made out of 304Grade SS,Embraco compressor,EBM fan motor , Dixel controller, Ventilated cooling, 220V/50HZ (Rated power input:339W) Removable inserting type imported rubber gasket, spring loaded hinges for all the doors and PVC door breaker between body and door. 3 wire shelves, heavy duty separate leg of size: 60mm dia full body SS pipe with adjustable SS bullet feet.Refrigerant used R134a

SS POT RACK - 3 TIER (LxWxH = 1200x600x1800 ) Unit to be provided with three nos pipe shelves, starting at 150 mm and then at equidistant, Shelves should be constructed with 32 mm dia 16G 304 SS pipe with internal grid of 19 mm dia SS pipe at 100 mm spacing. Four nos 40mm dia16g 304 ss pipe uprights with nylon adjustable bullet feet.

MOBILE CUTLERY SOAK SINK UNIT (LxWxH = 600x600x600 ) Top construction of SWG 16 (304) sheet.All siides turned up 25 mm at 45 degree, turned out 25 mm, turned down 50 mm and in 15 mm and secured to welded SS angle frame of size. 32 x 32 x 3 mm thick.With Bowl size 450X450X300 deep integral with top sheet.In the center 1 1/2"BSP drain coupling with ball valve lever. 25mm dia 16G SS 304 cross support starting at 150 mm. four numbers dia 38mm 16g 304 ss round pipe legs with dia 100 mm nylon castor wheels with 2 nos brake.

INSECT- O- CUTOR (LxWxH = 528x128x344 ) Glue type

Ionized Electrolite water generator (not based on RO) of a reputed brand having 12 platinum dipped titanium plates for commercial purpose; having water at alkaline PH in the range of 9-95 for regular drinking and with option for other PH ranges for cleaning and anti-septic purposes

Ionized Electrolite water generator (not based on RO) of a reputed brand having 8 platinum dipped titanium plates for Non-commercial purpose; having water at alkaline PH in the range of 9-95 for regular drinking and with option for other PH ranges for cleaning and anti-septic purposes

36-piece executive porcelain dining set with embossing of NACIN logo

12-piece cup & saucer set of capacity 150- ml

Induction Based Chefing dish with Food pan of SS 304 Grade, Square Chefing induction base, hydraulic Glass Lid and steam release with capacity of 6 Ltrs

Buffet Induction Warmer- Built in Glass top with 7 Warming steps with dimensions (LxWxH = 350x350x100 )

Soup Turene with Notched Lid, SS Finish to be supplied with 3 pin plug, 220v, 50hz, 400W & 3 temperature fittings- 6 litres capacity

Serving bowls with embosing of NACIN Logo with 3000 ml capacity

Trolley

SSWater Glass- 250 ml

Cup& Sacucer set of capacity 100 ml with NACIN logo Embosing

Procelien soup bowls with soup spoons with NACIN logo Embosing

SS rectangular serving trays 18”9”

SS Square serving trays 15”*15”

Porcelain Oval plates for serving of 2lts capacity with NACIN logo Embosing

SS Lunch plates of diameter 12” with NACIN logo Embosing

SS table spoon

SS tea spoons

SS fork (Medium sized)

SS Butter knife

SS Vacum Tea dispenser of capacity 7ltrs

SS Vacum Tea dispenser of capacity 5 lts

3 compartment SS plates

SINDHU GAYATHRI KITCHEN EQUIPMENT PVT LTD.,