Repair to all type of certain steel furniture, painting and polishing to steel and wooden furniture at Tibri Mil Stn under GE Gurdaspur.

Amount

ALMIRAH STEEL SMALL (FD-67/1032) Removing the unserviceable lock of Almirah steel small (FD 67/1032) and tighting of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown on drawing. Notes for item No. 1 to 79: Quoted rates shall be deemed to include one coat of synthetic enamel paint as per existing over one coat of red oxide primer to all replaced/ repaired mild steel parts and french polishing two or more coats on exposed surfaces including preparing the surface including a coat of wood filler on all wooden parts replaced/ repaired as applicable.

Removing the existing unserviceable locking device of Almirah steel med (FD 67/1032) and supply and fix new 3 way locking device with necessary fittings all as specified and as directed

Removing the existing unserviceable handle of Almirah steel small (FD 67/1032), supply and fix new 100 mm size chromium plated mild steel handle of approved quality all as specified and shown on drawing

Removing the existing unserviceable leg, supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted to Almirah steel med (FD 67/1032) all as specified and as directed

Removing the existing unservicable/Rusted door shutters (both) of Almirah steel med (FD 67/1032), supply and fix new door shutters (both) made of 1mm thick CRCA sheet complete all as specified and shown on drawing

Removing the exisiting unserviceable shelves of Almirah steel medium (FD-67/1032), supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted all as specified and as directed.

M&L for removing the existing dents/ bends of Almirah steel med (FD 67/1032) and preparation of old painted steel sufaces by scraping with emery paper, cleaning, derusting and making the surfaces smooth by applying putty, red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete all as specified and as directed.

Almirah steel large (FD-67/1031) Removing the unserviceable lock of Almirah steel large (FD-67/1031) and tightening of loose parts of the locking device and supply and fix new lock 7 lever with duplicate keys all as specified and shown on drawing.

Removing the existing unserviceable locking device of Almirah steel large (FD-67/1031) and supply and fix new 3 way locking device with necessary fittings all as specified and as directed

Removing the existing unserviceable handle of Almirah steel large (FD-67/1031), supply and fix new 100 mm size chromium plated mild steel handle of approved quality all as specified and shown on drawing

Removing the existing unserviceable leg of Almirah steel large (FD-67/1031), supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted all as specified and as directed

Removing the existing unservicable/ rusted door shutters (both) of Almirah steel large (FD-67/1031), supply and fix new door shutters (both) made of 1mm thick CRCA sheet complete all as specified and shown on drawing

Removing the existing unserviceable shelves of Almirah steel large (FD-67/1031) and supply and fix new shelves made of 1mm thick CRCA sheet to match the existing duly welded/riveted all as specified and as directed.

M&L for removing the existing dents/bends of Almirah steel large (FD 67/1031) and preparation of old painted steel sufaces by scraping with emery paper, cleaning, derusting and making the surfaces smooth by applying putty, red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete all as specified and as directed.

Locker steel (FD-1029) Removing the existing unserviceable handle of Locker steel (FD-1029), supply and fix new 100 mm size chromium plated mild steel handle of approved quality all as specified and shown on drawing

Removing the existing unserviceable hasp & staple of Locker steel (FD-1029), supply and fix new chromium plated mild steel hasp & staple of approved quality and appropriate size all as specified and shown on drawing

Removing the existing unservicable/Rusted door shutters (both) of Locker steel (FD-1029), supply and fix new door shutters (both) made of 1mm thick CRCA sheet complete all as specified and shown on drawing.

Removing the existing unserviceable leg of locker Steel (FD-1029), supply and fix new leg made of 1mm thick CRCA sheet to match the existing duly welded/riveted all as specified and as directed

M&L for removing the existing dents/bends of Locker steel (FD-1029), and preparation of old painted steel sufaces by scraping with emery paper, cleaning, derusting and making the surfaces smooth by applying putty, red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete all as specified and as directed.

Table dinning ORs steel (FD-165(R) Removing the existing unserviceable/rusted stiffener of Table dinning ORs steel (FD-165 (R) and supply & fix 25mm x 25mm x 1.6mm thick MS square pipe duly welded to the frame to match with original shape and position including minor repairs to the table complete all as directed

Removing the existing unserviceable table top of Table dinning ORs steel (FD-165 (R)), supply and fix new top made of 18mm thick pre-laminated particle board both sides teak faced including provision of 4mm thick 1st class hardwood teak beading all around complete all as directed

Supply and fix new PVC shoe suitable to the leg of Table dining ORs steel (FD-165 (R) after removing the unserviceable shoe.

M&L for removing the existing rust of Table dining ORs steel and preparation of old painted steel sufaces by scraping with emery paper, cleaning and making the surfaces smooth and applying one coat of synthetic enamel paint of olive green shade of approved quality complete all as specified and as directed.

Table office officer/clerk steel (FD-84/1003,1004) Removing the existing unservicable/rusted drawer of Table office officer/clerk steel (FD-84/1003,1004 ) and supply and fix new drawer made of 1mm thick CRCA sheet complete all as specified and shown on drawing

Removing the existing unserviceable/rusted stiffener of Table office officer/clerk steel (FD-84/1003,1004), supply and fix 25mm x 25mm x 1.6mm thick MS square pipe duly welded to the frame all as directed

Removing the existing unserviceable lock of Table office officer/clerk steel (FD-84/1003,1004) and supply and fix new lock of 6 levers with duplicate keys including removing dents and adjustment of locking device of drawers for smooth functioning complete all as specified and as directed

Removing the existing unserviceable table's locker of Table office officer steel (FD-84/1003) and supply & fix new locker made of 1mm CRCA sheet complete all as specified and as directed

Removing the existing unserviceable table top of Table office officer steel (FD-84/1003), supply and fix new top made of 18mm thick pre-laminated particle board both sides teak faced including provision of 4mm thick 1st class hardwood teak beading all around complete all as directed.

Removing the existing unserviceable table top of Table office clerk steel (FD-84)/1004 and supply & fix new top made of 18mm thick pre-laminated particle board both sides teak faced inculding provision of 4mm thick 1st class hardwood teak beading all around complete all as directed.

Supply and fix new PVC shoe suitable to the leg of Table office officer/clerk steel (FD-84/1003,1004) after removing the unserviceable shoe.

M&L for removing the existing rust of Table office officer steel (FD-84/1003 by scraping with emery paper and applying one coat of synthetic enamel paint of olive green shade of approved quality complete all as specified and as directed.

M&L for removing the existing rust of Table office clerk steel (FD-84/1004 by scraping with emery paper and applying one coat of synthetic enamel paint of olive green shade of approved quality complete all as specified and as directed.

Table 900mm x 600mm x 760mm with and W/O drawer (FD-1007 & 1008) Removing the existing unserviceable table top of Table 900mm x 600mm x 760mm (FD-1007/1008) and supply and fix new top made of 18mm thick pre-laminated particle board both sides teak faced including provision of 4mm thick 1st class hardwood teak beading all around complete all as directed

Supply and fix new PVC shoe suitable to the leg of Table 900 x 600 x 760mm (FD-1007/1008) after removing the unserviceable shoe.

M&L for repair to broken drawer by denting, welding, straightening, replacing damaged part complete all as shown on Drg (FD-1007/1008) and as specified & directed.

M&L for removing the existing rust of Table 900mm x 600mm x 760mm and preparation of old painted steel sufaces by scraping with emery paper, cleaning and making the surfaces smooth and applying one coat of synthetic enamel paint of olive green shade of approved quality complete all as specified and as directed.

Table 900mm x 900mm x 760mm (FD-1009) Removing the existing unserviceable table top of Table 900mm x 900mm x 760mm (FD-1009) and supply and fix new top made of 18mm thick pre-laminated particle board both sides teak faced including provision of 4mm thick 1st class hardwood teak beading all around complete all as directed

Removing the existing unserviceable/rusted leg of Table 900 x 900 x 760mm (FD-1009) and supply and fix 25mm x 25mm x 1.6mm thick MS squire pipe leg duly welded to the frame all as directed

Supply and fix new PVC shoe suitable to the leg of Table 900 x 900 x 760mm (FD-1009) including removing the unserviceable shoe.

M&L for removing the existing rust of Table 900mm x 900mm x 760mm with emery paper and applying one coat of synthetic enamel paint of olive green shade of approved quality complete all as specified and as directed.

Table bed side (steel) (FD/E6/MAP/15) Removing old UNSV top of Table bed side (steel) FD/E6/MAP/15 and S&F new top of 18mm thick pre-laminated BWR exterior grade particle board both sides teak faced including provision of 4mm thick 1st class hardwood teak beading all around complete all as directed

Removing old UNSV plywood from Back of table bed side steel and S&F new 6mm thick plywood 5 ply BWP grade.

Removing old UNSV telescopic channels of Table bed side steel FD/E6/MAP/15 and S&F new telescopic channels made of mild steel of 1.6 mm thick.

Removing old UNSV Handles and S&F 100 mm long powder coated metal alloy as approved by Engineer-in-charge

Removing old UNSV square tube of table bed side (steel) FD/E6/MAP/15 and S&F new 18mm square tube all as specified and directed.

S&F of PVC Shoe of Table bed side (steel) FD/E6/MAP/15 suitable to the leg after removing the unserviceable shoes.

M&L for removing the existing rust of Table bed side (steel) FD/E6/MAP/15 with emery paper and applying one coat of synthetic enamel paint of Black shade of approved quality complete all as specified and as directed.

Chair computer FD/E6/MAP/01) M&L for removing the existing damaged twin wheel casters from chair computer (FD/E6/MAP/01) and supply and fix new twin wheel caster duly fixed to match with the existing all as specified and as directed

M&L for repairs to seat from chair computer (FD/E6/MAP/01) and back of Chair by providing new tepastry cloth and rubber foam. (Cloth not less than Rs. 250.00 per metre).

M&L for removing unserviceable PVC arms rest from chair computer (FD/E6/MAP/12) and supply & fix new PVC arms rest to match with the existing all as specified and as directed.

M&L for Removing the existing unserviceable PVC Base for Chair Computer and S&F new PVC Base for Chair Computer of superior quality as to match with the existing all as specified and as directed.

M&L for Removing the existing unserviceable Shocker for Chair Computer and S&F new Shocker of superior quality as to match with the existing all as specified and as directed.

Chair verandah (FD-256) M&L for removing the unserviceable conduit of chair verandah (FD-256) frame and replace the same with new MS conduit 20mm bore,1.6mm thick, made to shape, duly welded all as directed.

M&L for removing of existing torn out/ unserviceable plastic cane from chair verandah (FD-256), preparing steel tubular frame surfaces of chair with emery paper for painting and apply two coat of synthetic enamel paint of white colour of approved quality and recaning the chair both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable PVC shoes of approved quality and colour all as directed.

BED HARD STEEL (FD/E6/MAP/03) M&L for removing unserviceable plywood top from the bed hard steel and supply and fix new 12mm thick BWR phenol bonded commercial plywood 7 ply on top of the bed all as shown on drawing and as directed.

M&L for welding/fixing of all broken joints of Bed hard steel in accordance with standard workmanship and specification complete all as specified, shown on drawing and directed by Engineer-in-Charge

Table Computer Godrej (FD/E6/MAP/03) Removing old UNSV top of Table Computer FD/E6/MAP/03 and S&F new 18 mm thick prelaminated BWR paticle board exterior grade both sides teak faced including wooden beading 4 mm thick of 1st class Hardwood teak all around (dimensions as shown in drawings).

Removing old UNSV telescope channels of drawer of Table Computer FD/E6/MAP/03 and S&F new telescope channels made of mild steel of 1.25 mm thick.

Removing old UNSV knob and S&F new Brass knob 25 mm dia of shape as approved by Engineer-in-charge.

Removing old UNSV PVC rectunglar cover and S&F new PVC rectunglar cover as shown in drawings.

M&L for PVC hard buffers to legs of table all as specified and shown in drawings including removing old UNSV buffers.

Chair Writing/Chair Dining Poly Seat (FD-261) M&L for welding broken frames (wherever required) with Gas welding complete all as specified (Welding to 19/20mm MS Tube all round will be considered as one unit)

M&L for removing the unserviceable poly seat and supply and fix new Poly seat with steel screws and washers of appropriate size complete all as specified

M&L for removing unserviceable rubber shoes and supply and fix new PVC shoes of approved quality complete all as specified

M&L for preparing the old steel surfaces, making smooth with emery paper and painting with one coat of synthetic enamel paint Black colour all as specified

Chair School With Hand Board (FD/E6/Map/05) M&L for welding broken frames (wherever required) with Gas welding complete all as specified (Welding to 19/20mm MS Tube all round will be considered as one unit)

M&L for removing the unserviceable poly seat and supply and fix new Poly seat with steel screws and washers of appropriate size complete all as specified

M&L for removing unserviceable rubber shoes and supply and fix new PVC shoes of approved quality complete all as specified

M&L for preparing the old steel surfaces, making smooth with emery paper and painting with one coat of synthetic enamel paint Black colour all as specified

Desk with seat (940mmx920mmx770mm) Removing existing unserviceable top of the Desk and seat (TP) and supply and fix new top as to match with existing made out of 18mm thick WPC Laminate Sheet duly providing 1mm thick PVC beading all around to match the existing complete all as specified and directed by the Engr -In- Charge

M&L for welding/fixing all broken joints in accordance with standard workmanship and specification compleate all as specified and directed by Engineer-in-Charge

M&L for removing the existing rust of Table 900mm x 900mm x 760mm and preparation of old painted steel sufaces by scraping with emery paper, cleaning and making the surfaces smooth and applying one coat of synthetic enamel paint black of approved quality complete all as specified and as directed.

Chair tubular steel with/without arms (FD-75 M) Removing unserviceable seat frame of chair tubular steel with/without arms (FD-75 M) and supply and fix new seat frame made out of shisham wood duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing as specified.

All as per ser No 73 herein before but back frame.

Removing broken handle from chair steel tubular with arms (FD-75M) and replacing with new handle made of shisham wood and fixed to the chair tubular with arms with screws of suitable size to the chair frame complete all as shown on drawing and as directed.

Supply & Fixing of bars MS Flat 20mm x 4mm thick welded at four corners at bottom of the seat to support for chair steel tubular with/ without arms (FD-75 M) and also screwed with the seat at two places including removing old unserviceable complete all as specified and as directed.

Book Case Steel FD-1028 Removing the unserviceable lock of Book Case Steel Fd-1028 and supply and fix new brass lock 7 lever with duplicate keys all as specified and shown on drawing (Make of lock :- Harison, Godraj)

Removing the existing unserviceable handle of Book Case Steel Fd-1028 and supply and fix 100mm size new chromium plated mild steel handle of approved quality all as specified and shown on drawing.

Removing the existing broken Glass of Book Case Steel Fd-1028 and supply and fix new plain glass of actual size 4 mm size thick of approved quality (Make :- Modi Guard, Atul) all as specified and dshown on drawing.

M&L for removing the existing dents/ bends of Book Case Steel FD-1028 and preparation of old painted steel surfaces by scraping with emery paper, cleaning, derusting and making the surfaces smooth by applying putty, red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete all as specified and directed.

A Schedule of Credit for old/unserviceable demolished/dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

BALWINDER SINGH AND SONS

ASHOK KUMAR MAHAJAN

talwinder singh and co

M/S D Raj And Co

RATTAN CHAND CHANDAN AND CO