Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.0 LAccepted-AOC | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹36.3 L+₹46,366.80 (1.30%)Rejected-Finance | L2 | Rejected-Finance Being Not Lowest | |
| 3 | L3₹36.5 L+₹65,849 (1.84%)Rejected-Finance RZ 382 3RD FLOOR GALI NO 11B KAILASH PURI EXTN PALAM COLONY PALAM VILLAGE NEW DELHI 110045 | SOUTH WEST | DELHI | 110045 | L3 | Rejected-Finance Being Not Lowest | |
| 4 | L4₹37.7 L+₹1.9 L (5.25%)Rejected-Finance | L4 | Rejected-Finance Being Not Lowest | |
| 5 | L5₹40.4 L+₹4.6 L (13.0%)Rejected-Finance HOUSE NO 86 SUJEET VERMA RAJEEV NAGAR PH 3 DELHI NORTH WEST DELHI DELHI 110086 UDYAM DL 06 0117122 | NORTH WEST DELHI | DELHI | 110086 | L5 | Rejected-Finance Being Not Lowest |
Tender Value
₹43.6 L
EMD Value
₹87,140
Closing Date
18 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Delhi Cantt10
GE (West) Delhi Cantt10
Spl Repair to Bldg No T03 and T04 at 262 Transit Camp under GE (West) Delhi Cantt10
2024_MES_647692_1
GE/DW-98 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
DELHI CANTT
Class E Category a (i)
8 documents required · 8 mandatory
₹500
GE (West) Delhi
₹87,140
Yes
3 Jun 2024
23 Mar 2024
20 Apr 2024
23 Mar 2024
18 Apr 2024
11 Apr 2024
Amount
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings incl ridge complete all as specified & directed.
Dismantling framed timber scantlings any size in section, in any position (as in purlins etc) complete all as specified & directed.
M&L for Mild Steel conforming to Fe-290 Gde-E-165 work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S. 1161-1979 grade ST-240 complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour as approved by GE having tensile strength of 550Mpa as in roof covering, ridge, fixed with self tapping screws complete all as specified & directed.
S&F pre-painted galvalume aluminium zinc coated (150GSM) GI based plain steel sheet or machine moulded profile ridge/corrugated steel sheet ridge 0.50 mm thick of any colour as approved by GE having tensile strength of 550Mpa as in roof covering, ridge, fixed with self tapping screws complete all as spd & directed.
S&F false ceiling with powder coated GI grid of size 600x600 mm using main Tee of size 24x28x0.40mm prepunched to accept cross tee of size 24x28x0.40mm and wall angles of size 25x25x0.40mm fixed with wall around of size with and including 4mm thick fiber cement board white colour designer tiles as approved by GE of size 595x595 mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fixture etc complete as per manufacturers instructions complete all as spd & directed including dismantling old false ceiling any type.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.
M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in CM 1:6 complete all as specified and directed.
M&L for Glazed ceramic coloured tiles in vertical surface,450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match Coloured tiles in patch work repair including 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.
M&L for PVC tiles beading for external edge of tile joints of size 6.5mm to 12.5mm of hight 3.2 M of approved colour for providing round finish to tile etc complete all as specified and as directed.
M&L for 8 to10 mm thick Virified Ceramic tiles double charged/ultra charged (square / rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in CM 1:6. complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded aggregate) for plinth protection over rammed earth finished even & fair complete all as spd and directed.
M&L for 25mm thick PCC 1:2:4 type B0 using 12.50mm graded stone aggregate as in levelling couse of sub base all as specified and directed.
M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete including demolition of brick work and removal of rubbish beyond MOD land all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each complete all as spd & directed.
All as per item No. 15 above but n. exc 1.5 sq. m each.
M&L for powder coated Anodised aluminium frame for doors, windows, ventilators, grill, partitions with one or more rebates including joining cleat for fixingcomplete all as specified & directed.
M&L for powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified & directed.
M&L for powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified & directed.
M&L for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden) complete all as specified & directed.
Dismantling Water tanks exc 500 but not exceeding 1000 Ltr capacity and removing to store complete all as specified & directed.
M&L for 1000Ltr capacity Rotational moulded polyethylene water storage tanks tripple layers white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified including all necessary tank connection and cover,reducer, 25mm bore ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed.
S&F for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, uinal Partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bedding in CM 1:6. includig dismantling old plaster complete all as specified and directed.
M&L 20mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tubing and connections all as spd and directed.
M&L 25mm CPVC pipes SDR 11 with all plain CPVC SDR 11 and brass elbow, Tee, MTA/BTA Adeptor,tank adeptor etc. CPVC fittings and fixed complete to walls, ceiling or laid in floor including taking up or down old steel tubing and connections all as spd and directed.
S&F 25mm outer dia CPVC Ball valve/gate valve complete all as specified and directed.
M&L for solid WPC (Wood Polymer Composite) sheet 18mm thick (water proof and termite proof) prelaminated one side with decorative choice colour and other side balancing white as in cup board shutter. The sheet shall be finished all edges with 0.5mm beading/ lipping of same lamination pvc sheet pasting or bonding tape etc complete all as per manufacture's instruction, specification and as directed.
S&F in repair 40 mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.
S&F for 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, bright finished same as existing model for almirah and cup board complete all as specified & directed.
M&L for mild steel work for brackets, cleats, support of cupboard, holdfast etc complete all as specified & directed.
M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in hold fast complete all as specified & directed.
S&F Brass chromium plated bib tap 15mm size long body half turn fancy type complete all as specified and directed.
S&F brass chromium plated anglular stop valve 20mm size half turn fancy type complete all as specified and directed.
S&F for Brass chromium plated bottle traps 32/40mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified & directed.
S&F in repair vitreous China wash down water closet pan (pedestal pattern) incl P or S Trap of cast iron , white and connection with cistern complete all as specified and directed.
S&F plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved colour and as per existing model complete all as specified and directed.
S&F 15mm dia swan neck fancy type pillar taps brass body with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified and directed.
S&F in repair 10 ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.
S&F Grating doom 125 mm dia with waste hole of SS. (Minimum weight 40gms) complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts complete length 600mm complete all as specified and directed.
S&F in repair flexible PVC waste pipe with coupler complete 900mm length complete all as specified and directed.
S&F in repair CP over head shower rose 125 mm dia with arm moving arrangement complete all as specified and directed.
S&F in repair Vitreous China wash hand basin, white, Oval shape, under countered size as per existing model 480X560X 150 mm including coupling, waste pipe fix in granite top complete all as specified and directed.
S&F in repair chromium plated stanless steel curtain rod 25mm bore fixed with fixing brackets,stops, rollers etc complete all as specified and directed.
S&F for drapery rod's side bulb stainless steel chromium plated suitable for 25mm bore curtain rod complete all as specified and directed.
S&F in repair coated MS drapery rod's brackets as required complete all as specified and directed complete all as specified and directed.
M&L for rendering 12-15mm thick ready mixed plaster on any type brick work or concrete surfaces complete all as spd & directed.
M&L for rendering 5mm thick in ready mix mortar on ceiling surface complete all as specified and directed.
Complete removal of existing treatment of painting by scraping, brusing, wahing down to open the brick or concrete original surface and raking out joints/ pointing in cement mortar to brick work in walls or to bricks on edge in floors, surface channels, roofs, etc complete all as spd & directed.
M&L for providing not exceeding 1mm thick wall care putty on wall surface exterior/interior grade complete all as spd & directed.
M&L for preparing surface of wall and applying two coat of oil bound distemper all as specified and directed.
Material & Labour for applying and finishing walls surface with two or more coats of Acrylic Smooth exterior paint of required shade over and including priming coat of exterior primer complete all as spd & directed.
M&L for preparation of new steel & iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint over a coat of red oxide primer complete all as spd & directed.
M&L for preparation of old painted steel & iron surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of syntethic enamel paint complete all as spd & directed.
M&L for impregnating cream for injection into masonary or concrete wall 230mm thick agaist capilary rising humidity/dampness, using rising bar super storng (product No 201) of chowgle building chemicals or quivalet in other manufactures as directed. Method of application:Medhodology (a) The surface must be sound, absorbent, clean, free of dust, oil, paint, curing agents, loose cement or lime plaster & conrete, debrish, or any separation layers. (b) The plaster must be knocked off at least 50cm beyond the visibly penetrated area. (C) Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. All sharp edge/joints need to be levelled, loose concrete to be removed. (d) Drill boreholes at gound level horizontally, The boreholes are drilled horizontaly, The boreholes are drilled horizontaly center to center 250mm to 250mm into the masonary.
Taking down carefully copper/aluminium any type of point wiring (light/fan/socket /power) complete (fittings such as switches, ceiling roses, holders, sockets,regulators light fittings) and making good the disturbed surfaces of wall/floors/ceiling etc) complete all as specfied & directed.
Material and labour for concealed point wiring with PVC insulated unsheathed multistranded colour code copper conductor in PVC conduit with FRLS cable1.5 Sqmm size 1100 volts grade conforming to IS:694 in new modular metal flush box of 1.6 mm thick including one coat of synthetic enmelled black paint and providing modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit all as specified and directed by Engr-in-charge for the following :- (a) One light/fan/bell point controlled by one way switch 5 amps.
(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.
(c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.
Material and Labour for concealed point wiring with PVC insulated unsheathed multistranded FRLS copper conductor in PVC conduit with cable 2.5 Sqmm size 1100 volts grade conforming to IS:694 in new modular metal flush box of 1.6 mm thick including one coat of syenthetic enamelled black paint with new modular white cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core stranded FRLS copper conductor 1.5Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for One 3 Pin socket 15A Indepentent board
S&F Modular switch 1 way 6 A, 1 module complete all as specified and directed.
S&F Modular switch 1 way 16 A,1 module complete all as specified and directed.
S&F of Modular socket outlet 6 A, 2/3 pin, combined 2 module complete all as specified and directed.
S&F of Modular socket outlet 16 A, 2/3 pin, combined 2 module complete all as specified and directed.
S&F bell push modular type 5 Amp complete all as specified and directed.
S & F recesse Type LED Panel of not less than 34W 3000K, size 600X600mm with CRCA powder coated White Housing, Surge Voltage protection min 3KV, safety & performance test as per IS:15885 Part 2/Sec 13. Complete with all accessories as required with connections. complete all as specified and as directed.
Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and refixing after repair work, complete all as specified and directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F for Decorative walll light fixture made up of Polycarbonate, Spiral B-22 Base suitable for 7 Watt LED Lamp including 7Watt Lamp complete all as specified and directed..
M&L for modular AC Box with 20A SP mini MCB, Plastic enclosure & unbreakable Heavy Duty ISI mark Plug Top complete set dully concealed in wall complete all as specified and directed.
Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 4.00 sqmm (Main Cable and neutral) and one run of IC x 4.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including taking down old wiring, all as specified and directed.
Supply, laying and drawing submain wiring in and including 20 mm dia concealed PVC rigid conduits including cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed on walls 02 runs of IC x 6.00 sqmm (Main Cable and neutral) and one run of IC x 6.0 sqmm (as earth wire) of multistranded copper conductor PVC insulated unsheathed cables of 1100 volts grade conforing to IS : 694 of 1990 complete including taking down old wiring, all as specified and directed.
S&F Wall Mounting Fan single phase 230/240V of 400 mm sweep, including taking down old one, complete all as specified and directed.
S&F Exhaust fan metallic type ventilating single phase 230/240V of 300 mm sweep with Louvre including cutting of holes in a round shape and including fixing the ventilating fan complete all as specified and directed.
S&F Exhaust fan metallic type ventilating single phase 230/240V of 450 mm sweep with Louvre including cutting of holes in a round shape and including fixing the ventilating fan complete all as specified and directed.
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed.
Supply and fixing LED lights fitting 1x 12W (2 feet length), 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.complete all as specified and directed.
S & F of Lamp holder,PVC /Polycarbonete type with back plate suitable for batten fittings with connections along with 9 Watt LED bulb, complete all as specified and directed
S&F of electric storage water heater of capacity 25 ltr with vitreous enamel coating with all accessories and fittings arrangements and testing after installation complete all as specified and directed.
S&F of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
S&F of factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 160, 4 pole MCCB and ELM as incommer and 12 SP MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable end box for above DB including taking down old DBs complete all as specified & directed. NOTE :- (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.
S&F of SPN MCB 40-63 amps , 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed.
S&F of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.
S&F in of MCCB 125 Amp 4 pole 16 KA at 415 V with fixed thermal megnatic release complete all as specified directed.
S&F of single pole MCB 40- 63 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.
Supply and fixing LED Building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed.
S&F of electric bell Ding-Dong AC 230 Volt SP with brass screws and cup washers all as specified and directed.
Supply & Fixing LED reading lamp, wall mounted with Adjustable Arm having LED light source of 7 watts, aluminum body with powder coating finish, complete al as specfied and directed.
Supply and fixing 250 mm PVC Fresh Air exhaust fan single phase, 230/240 V With Louvre including cutting of holes in a round shape (Precast piece to be incorporated for smooth and ever finish) and including fixing the exhaust fan complete all as specified & directed.
S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.
M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, burieddirectly in ground (earth pit not lessthan 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.
JAIPAL AND BROTHERS
A S CONSTRUCTION CO.
M/S Davinder Kumar
M/s Verma and Co
S GOURAV PRAKASH ENTERPRISES
M/S Rohit Enterprises
HANUMAN BUILDERS
M/s M M BAHL
ramveer Singh
B. S BUILDERS
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .