CERTAIN REPAIRS TO SUNKEN FLOOR TREATMENT AND CONNECTED MISC BR ITEMS TO JCOs/OR/FAFA MD ACCN AT NAR BAHADUR ENCLAVE UNDER AGE BR-I, NEW CANTT, PRAYAGRAJ

Amount

Demolition, Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.

Demolition, Cement concrete (reinforced) of roof and floor,beams ,staircase,landing,chajjas,Rcc 500lit watertank and similar suspended work in any position complete all as specified and as directed by the Engineer-in-Charge.

M&L for Reinforced cement concrete 1:1.5:3 M-20(20mm graded aggregate)in chajjas beams lintels cantilever f,air finish using necessary form work complete all as specified and as directed by the Engineer-in-Charge(note form work paid seprately)

M&L for cutting channels groves or rebates where reinforcement is cut through n exc 15cm girth and trimming the surface complete all as specified and directed.

M&L for formwork to chullah hoods, chajjas trough,beam and similar item including edges for fair finished surface all as specified and directed by engineers in charge.

S&F for TMT bars, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with & including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge

M&L for taking down cement of cement mortar plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge

M&L for Rendering 10mm thick in cement plaster 1:6 on any fair faces of brick work or concrete surfaces finshed even complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar CM 1:4 in two layer (First coat 10 mm thick and second 5 mm thick) mixed with water proofing compound @3% by weight of cement (in top layer ) as in window projection/ chajjas / slabs /beams ,seeping external/internal wall at any position ht upto 10mtr from floor level and finished even complete all as specified and directed. (WPC will be measured and paid separetly)

M&L for Rendering 10mm thick in cement plaster 1:3 on ceilings fair faces of brick work or concrete surfaces finshed even complete all as specified and directed.

M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge

M&L for Non-Skid coloured non skid vitrified ceramic tiles 10 mm thick, scratch free,acid reistance (square/rectangular) area of tiles exc .18 sqm and n exc .38 sqm in each tilwe as in floors,skirting and dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying glazed tiles in floors etc complete all as specified and as directed by the Engineer-in-Charge

Supply and fix non skid coloured ceramic tiles 7 to 8 mm thick ,scratch free,acid reistance (square/rectangular) area of each tiles exceeding 0.11 sqmm and not exceeding 0.18 sqmm in floor, set & jointed in neat cement slurry and pointed in white or coloured cement to match over joint free and including 15mm thick screed bed in cement and sand mortar (1:6) complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of screed bed.

Supply and fix non skid coloured ceramic tiles 7 to 8 mm thick ,scratch free,acid reistance (square/rectangular) area of each tiles exceeding 0.06 sqmm and not exceeding 0.11 sqmm in floor, set & jointed in neat cement slurry and pointed in white or coloured cement to match over joint free and including 15mm thick screed bed in cement and sand mortar (1:6) complete all as specified and directed. Note :- Quoted rate shall deem to be included cost of screed bed.

S&F for Glazed ceremic coloured printed tiles of size 450x 300mm x7mm thick as in dados, skirting, wall etc set jointed in neat cement slurry and pointed in coloured cement to match the tiles over 10mm thick rendering as in CM 1:4 for laying glazed tiles in floors etc complete all as specified and as directed by the Engineer-in-Charge

M&L for machine cut Kota stone slab 20 to 25mm mm thick in treads, landings of stair case , platform, pathway etc over cement screed bed laid and jointed wilth grey cement slurry mixed with pigment to match the shade of the slab lincluding & grinding polishing over and including screedbed 15mm thick in cm 1:6 complete all as specified and directed.

S&F for mirror polishing on marble/ granite /kota stone wherever required to give high gloss finish complete all as specified and directed.

S&F for rounding of edges of stone slabs one edge such as in cooking platform, steps and oter similar items complete all as specified and directed.

M&L for 75 mm thick type D-2 1:4:8 (using 40mm graded stone agg) as in sub base complete all as specified and directed.

M&L for 60mm thick rubber moulded glosy finished inter locking paver block with grey cement and pigment of any type and shape the minium compressive strenth noy less then 350 kg/sqcm as approved complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 20mm thick machine pressed set jointed and pointed in neat cement slurry in floors and , laid over and including 15mm thick screed be din cement mortar (1:6) mixed with and and joints of cement concrete tiles shall be filled with cement mortar (1:4) mix with and complete all as specified and directed.

M&L for Sand filling under floor including watering and consolidation complete all as specified and directed.

M&L for PCC 1:3:6 type C-1(using 20mm graded stone aggregate) for providing cement concrete as levelling and roof kerbs or mud stops, including finishing the surface with grinder to receive the acrylic based water proofing material, rounded or chamfered on edges etc complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 20mm thick green marble work 18 to 20mm thick(table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and moulding /rounding to edges complete all as specified and directed.

M&L for Sunken floor treatment as in following sequence:- (a) The surface of Sunken floor is to be properly cleaning the dust, dirt and any other foreign material, fungus moss etc from the surface. (b) M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of sunken area when concrete is green. (c) Applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformly and primer shall be allowed to dry over night as conforming to IS 3384-1986. (c) M&L for APP based polymeric water proofing membrane of 3mm thick (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per Sqm) shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap, sealing all overlaps including at all junction and corners with bonded to the surface by fusing and bonding torch on method complete all as specified and directed.

Repairing of RCC projection chajjas roofs,facia etc by necessary preperation ,scraping,cutting derusting,and cleaning exposed reinforcement, surface of damanged loose RCCand provindingcement concrete 1:2:4 using12.5 mm aggregateincluding necessary formmworkand reinforced with chicken wiremesh and rendering in cement mortar 1:3 using coarser sand in pathches n. exc 5 sqmincluding aplying 2 coats of finishes as provindingto existing surface at any heigt complete all as specified and directed.

M& L for cement concrete type E2 1:5:10 (40mm graded stone aggregate) as lean concrete in filling / Mass concrete complete all as specified and directed

M&L for 75mm thick cement concrete type C-2 1:3:6 using 40mm graded aggregate as in plinth protection, sub base etc complete all as specified and as directed by the Engineer-in-Charge

Taking down steel tubing and connections including removing from site of 15 mm bore pipe complete all as specified and directed.

Taking down steel tubing and connections including removing from site of 20 mm bore pipe complete all as specified and directed.

S&F for 15mm bore steel water tubing medium grade, galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors including cutting chasing making groves in brick wall complete all as specified and directed by Engineer-in-charge.

S&F for 15mm bore steel water tubing medium grade, galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors including cutting chasing making groves in brick wall complete all as specified and directed by Engineer-in-charge.

S&F in repair gate valves gun metal with iron wheel head screwed both ends for iron pipes and fixed 25mm fixed complete all as specified and directed.

S&F in repairs to triple layer black/white colour rotational moulded vertical water storage tanks with closed tops ( cylinderical ) hoisted and fixed in position 500 ltr capacity incl disconnecting and refixing the existing GI fitting and pipegate valves gun metal with iron wheel head screwed bot h ends for iron pipes and fixed 25mm, float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25mm bore minimum weight 210 gms complete all as specified and directed.

S&F for ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and as directed.

S&F for ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 15mm/bore minimum weight 142gms complete all as specified and as directed.

Supply and fixing(in Repair) vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed . including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed.

Supply and fixing in repairs 10 ltrs capacity PVC low level valve less flushing cistern (white) syphonic action type with all fittings such as inlet ball valve, float, and handle 32 mm dia polythene high density flush pipe and connected to water closet any pattern complete all as specified and directed.

Supply and fixing in Repair vitreous china wash hand basin, white, flat back, size 580x450mm excluding taps, waste, chain and plug and porcelain stopper but including pvc connection pipe of 450mm length, waste coupling of 32mm dia of PTMT, MS brackets including cutting for and pining in ends of brackets complete all as specified and directed.

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair 15mm bore dia fancy type pillar tap swivel spout deck mounterd 15mm dia size with Screwed down high pressure,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repairs 15mm dia long body bib tap, cast copper alloy with capstan head, CP fancy type with long body shank, screwed down with high pressure screwed for iron pipe & fixed 15mm bore, complete all as specified and directed.

S&F in repairs concealed stop cock fancy type CP with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15mm bore complete all as specified and directed.

S&F in Repair 15mm bore dia two way Bib tap cast copper alloy with fancy handle ,screwed for iron pipe or for ferrue and fixed complete all as specified and directed.

S&F in repairs 15mm dia PVC Connection 450 mm long with 2 nos brass check nuts suitable for 15 mm bore of pipe with washers complete all as specified and directed.

S&F in repair 15mm dia Stop valves,fancy type cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Repair only to CP long body bib taps , pillar tab,bib tap, etc of any make by replacing spindle,nippule ,washer ,knob etc at any size etc complete all as specified and directed.

S&F in repair 32mm dia PVC flush pipe for low level flushing cistern long type complete all as specified and directed.

S&F in repair of PVC waste pipe 32mm dia, 90 cm long for wash hand basin complete all as specified and directed.

S&F in repairs 15mm Bib tap dia of pipe standard of PTMT long body white colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm Pillar tap tap dia of pipe standard of PTMT high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm stop valve dia of pipe standard of PTMThigh pressure screwed for iron pipe and fixed

M&L in reapir soap dish chromium plated brass fixed with brass nuts complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar at any height and making good in cement concrete (1:2:4) Type B-1 exc half but n exc one brick thick complete all as specified and directed

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including pvc waste pipe, CP waste coupling,bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L for 75mm PVC (SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F for 1mm thick stainless steel kitchen plate rack of size 750x 900mm best quality assembled with brass washer and nut and bolts including hooks (spoon/cup holders) complete all as specified and as approved by GE.

S&F in repar Aluminum chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed.

S&F in repair brass chromium plated shower roses with swivel joints, 125 mm size in square with CP long shank arm including fixing to steel pipe or union, complete all as specified and as directed.

S&F in repair Grating doom 100mm dia of CP complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F for 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F for 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F for 75 mm PVC (SWR) junction single, (singl T ) (equal or unequal ), ordinary or inverted ( spigot or socket type ) or with paralle oval access doors branches .complete all as specified and directed.

S&F for PVC SWR (110) bends any radius complete all as specified and directed.

S&F for 75 mm PVC (SWR) bends any radius diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F for 75 mm PVC (SWR) vent cowl complete all as specified and directed.

S&F for stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 100mm complet all as specified and directed.

S&F for stack clamps out of 50mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roofs for bore of 75 mm complet all as specified and directed.

S&F in repair waste coupling of PTMT (half or full thread), 32mm dia with minimum weight 45 gm complete all as specified and directed.

S&F in repair waste coupling of PTMT (half or full thread), 40mm dia with minimum weight 60 gm complete all as specified and directed.

S&F in repair mild steel angle iron bracket with 25x25x3mm angle iron for WHB including steel painting and making good disturbed surface complete all as specified and directed.

Supply & Fixing in repair PVC Syphon kit suitable for PVC cistern complete all as specified and directed.

S&F in repair PVC cover (Lid) for OHT of capacity 500/1000 Ltr complete all as specified and directed.

Repairing only for Leakage of Rotational moulded polythene three layer water storage tanks position 500ltrs capacity including disconnecting the tank with rapair the leakage portion using M seal, 2Nos of 20 to 25mm GI union and checked nut etc complete all as specified and directed.

S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

M&L for Washing rubbing down and stopping of distempered and painted surface and applying one coats of distemper oil-emulsion complete all as specified and directed.

M&L for complete removal of existing treatment and applying two of oil bound distemper over 1.5mm thick wall care putty using roller complete all as specified and directed.

M&L for preparation of existing treatment on old surface of walls and applying two of oil bound distemper all as specified and directed

M&L for preparation of newly plastered surfaces of celing and applying two coats of oil emulsion distemper over a coat of primer with 1mm thick wall care putty etc complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coats of cement based paint complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying two coats of cement based paintr complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered wall surfaces and applying one coat of white wash complete all as specified and directed.

All as per Item No 88 here in above but on ceiling surfaces complete all as specified and directed

M&L for preparation of new plaster surface of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces of walls applying two coats exterior emulsion paint over a coat of primer with 1.5 mm thick wall care putty etc complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed by the Engineer-in-Charge.

M&L for preparation of old painted Steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed by the Engineer-in-Charge.

M&L for preparation of new or previously untreared surface of wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as directed by the Engineer-in-Charge.

M&L for preparation of new or previously untreared surface Steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primercomplete all as directed by the Engineer-in-Charge.

S&F in repair fancy type decorated Stainless Steel curtain hanging rods 20 mm dia,and fixed to stainless steel bracket for hanging curtain complete all as specified and directed. Note: (brackes paid sepratevely in espective item)

S&F for Stainless Steel brackets having screw for tighting of curtain rod of 20mm dia for fixing of curtain rod, complete all as specified and directed.

S&F for Stainless Steel bright color decorative corner/end cap for Curtain rod complete all as secified and directed.

S&F for stainless steel peg set of six with base plate and fixed to wall/door with rawal pugs/ s/s screw all as specified and directed.

S&F for fancy type glass corner shelf (2 in each pair with CP brackets etc complete all as specifed and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

S&F for MS hollow sections for single pattam chowkhats inecessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S&F for MS hollow sections for double pattam chowkhats inecessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M&L for Solid PVC Frame for door,kitchen cabinet,cupboard of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F for Second class hardwood glazed and skeleton door and windows shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S&F for Second class hardwood Flush shutters 30-32mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class Hard wood, Plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue painted at joints complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style)both side prelam pvc sheet of decortive choice consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed including 3nos 100mm stainless steel hinges, 3 nos of 150mm long tower bolt 2 nos of 150mm long Aluminum handle, long aluminum sliding bolt complete all as specified and directed.

S&F for steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specifed and directed.

S&F for Steel ventilator with top hung shutter including hinges, steel peg stay etc, complete all as specified and directed.

M&L for removing steel windows( size n exc 2 sqm )with side hung shutter from ground floor / first floor and refixing in same opening after easing ,adjusting,welding and refixing builder hardware as required including replacing unserviceable screws hinges handles, pegstay, tower bolt etc complete all as specifed and directed. (note: hinges,handles paid sepratvely)

S&F for MS 1.25 mm thick MS plain black sheet in steel gates and similar work, cut to size, holes punched, including round headed screws and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded as required complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways, railings, framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as spesified and directed .

M&L for PCC 1:2:4 type B-0 using 12.5 mm granted crushed stone aggregate as hold fast/filling in pressed steel frame coping around path,benching over chajjas, complete all as specified and directed

S&F in repair100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as spesified and directed .

S&F for 300 mm long Aluminium alloy with dia 16mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as spesified and directed .

S&F for 250 mm long Aluminium alloy with dia 16mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.complete all as spesified and directed .

S&F in repair 300mm long Aluminium alloy with dia 16mm, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as spesified and directed .

S&F in repair150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as spesified and directed .

S&F for 150mm long Aluminium anodised barrel tower bolts of extruded section complete all as spesified and directed .

S&F in repair 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as spesified and directed.

S&F for 100mm long Aluminium anodised barrel tower bolts of extruded section complete all as spesified and directed .

S&F for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spesified and directed .

S&F for floor door stopper of aluminum alloy body and tongue anodised with hard drawn steel spring fixed in repairs complete all as specified and directed.

S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S&F in repair 4mm th Sheet glass, ordinary quality in square in not exc 0.5 sq.m in each pane complete all as specified and directed.

S&F for 4mm thick Figured glass, pin head type in squares in n exc 0.5 sq.m in each pane complete all as specified and directed.

Supply and fixing of rubber beading door seal 40x 5mm strip in bottom of door complete all as specified and directed.

S&F in repair 17-18mm thick celuka PVC sheet minimum 600 Kg/Cum density grade 1 quality one side pre-laminated and other side plain white colour to make kitchen cabinet/drawer shutters fixed with screws, solvent cement/adhesive and parliyament hinge, magnetic stainless steel 100mm handle catcher as requred as per manufacturer instructions complete as per specifications and as directed by the Engineer-in-Charge. Note:- (i) Cup board accessories ie fittings, handles,magnnetic cathcher, hinges, will be measured and paid under this schedule. (ii) Quoted rates deem to be include fixing of cabinet on wall with appropriate rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet to be carried out by authorised vendor of manufacturer only.

S&F for 17-18 mm thick MDF type board nterior grade decorative type with prelaminated on one side and balancing white on other side inncluding external teak wood lipping 6mm thick 18/19mm wide fixed with nails on edges complete all as specified and directed.directed.

S&F for magnectic catches with steel body H type Fixed to shutter as required complete all as spcified and directed .

S&F for 125 mm Hasp and staple,aluminum anodised and fixed with screw complete all as spcified and directed .

S&F for Continous (piano) hinges, mild steel bright finished or electro qalvanized, width of flaps(When open) 30mm complete all as specified and directed.

Easing of door shutters for easy closing / opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing iron mongry exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed.

Refixing of doors in same opening after Easing for easy closing / opening, end tightening of butt hinges in position, adjustment of butt hinges in position, adjustment of existing iron mongry exc 1 Sqm and n.exc 2 Sqm each complete all as specified and directed.

Taking down of shutter of any decription exc 1 sqm but n. exc 2 sqm complete all as specified and directed.

M&L for Cleaning and removing all scale and dirt etc from tanks of capacity n exc 500 ltr and from mouth of circulating pipes including writing on external surface of tank in bold letter cleaning date in DD/MM/YY format.complete

S&F 2-3mm thick Aluminium composite panel of size 40cmx25cm cladding using aluminium composite panel sheet fix over a concrete or brick surface with 04 nos of stainless steel studs on wall and .including writting in bold letter with glowing/glazing sticker are as follows :- BLDG NO YR OF CONST LAST SPL REPAIR LAST MAINT.

Schedule of Credit (MINUS) Rs. 90,258.00 B/F from Serial Page No. ___ [Note : Details of items for schedule of credit is given on Srl Page No. ___] This amount shall be automatically deducted to arrive at tendered sum

Airways Enterprises (BID ID -3414376)

M/S SANJAY CONSTRUCTIONS (BID ID -3415336)

Anupravesh Enterprises (BID ID -3413146)

R.K.ASSOCIATES (BID ID -3419870)