PROVN OF 2 GD ROOMS FOR NI PICKET WITH TOILET NEAR CHANDAN POST AND AMN STORAGE BLDG AND SR TO FALSE CEILING, CURTAIN RODS AND CONVERSION OF AL WIRING TO COPPER WIRING IN HLDG NO. E-6 to 8 (OR MD ACCN) AT ARMY AREA MADUKKARI UNDER AGE I COIMBATORE

Amount

M&L Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc not exceeding 10sqm on plan and not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning filling, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in hard/dense soil complete all as specified and as directed.

Removing excavated soils not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L Plain Cement Concrete 1:4:8, Type D2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M&L Form work finished rough to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work vertical or to batter complete all as specified and as directed by Engineer in Charge.

M&L Form work to sides of Pillars, posts, struts, piers, columns and sanctions complete all as specified and as directed.

M&L Form work finished rough, to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also splays between floors, and beams, etc complete all as specified and as directed by Engineer in Charge.

M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors and roofs not exceeding 200mm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 100mm wide and not exceeding 200mm wide with rough finished surfaces complete all as specified and as directed.

M&L Form work to chullah hoods, chajjas, troughs and similar items including edges, etc complete all as specified and as directed by Engineer in Charge

M&L Reinforced cement concrete 1:2:4 (nominal mix), Type B1, using 20mm graded stone aggregate for foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

M&L Reinforced cement concrete 1:2:4 (nominal mix), Type B1, using 20mm graded stone aggregate for columns, etc, complete all as specified and as directed.

M&L Reinforced cement concrete 1:2:4 (nominal mix), Type B1, using 20mm graded stone aggregate for Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified and as directed.

M&L Reinforced cement concrete 1:2:4 (nominal mix), Type B1, using 20mm graded stone aggregate as in Slab supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L Reinforced cement concrete 1:2:4 (nominal mix), Type B1, using 20mm graded stone aggregate as in Chejjas complete all as specified and as directed.

M&L TMT bars 10mm dia and over as in reinforcement, cut to length, bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and as directed.

All as in item No 17 hereinbefore but 6 mm to 8mm dia complete all as specified and as directed.

M&L TMT bars 5mm dia and over up to and including 10mm dia in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire as in stirrups, spacers and binders complete all as specified and as directed.

M&L 20mm thick cement plaster in cement mortar 1:3 finished fair and even on top of roof slab complete all as specified and as directed.

M&L Roof treatment with APP modified prefabricated polymeric membrane 3mm thick and weighing not less than 3 to 4kg/sqm reinforced with non woven polyester matt black finished, side lap & end lap 10 cm, to be sealed with torch application of membrane, over compatible primer @0.30 Kg/Sqm and finishing with aluminium paint applied @ 0.10 Kg/Sqm finished complete all as specified and directed.

M&L Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirting's, drip moulds and similar work exceeding 15cm but not exceeding 30cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. complete all as specified and as directed.

M&L Plain cement concrete 1:2:4, Type B0, using 12.5mm graded stone aggregate as in coving complete all as specified and as directed.

M&L Moorum/Red Bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering and complete all as specified and as directed.

M&L Hardcore with broken granite stone of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L Precast cement concrete solid block masonry in 1:3:6 type C1 (using 20mm graded stone aggrgate) exceeding 10cm in width and set in CM 1:4 complete all as specified and as directed.

M&L Precast cement concrete solid block masonry in 1:3:6 type C1 (using 20mm graded stone aggrgate) 10cm in width and set in CM 1:4 complete all as specified and as directed.

M&L 15mm thick Rendering in CM 1:6 finished even and smooth without using extra cement on fair faces of brick/concrete wall surface complete all as specified and as directed.

M&L 15mm thick Rendering in CM 1:4 finished even and fair, mixed with water proofing compound as per manufacturers instructions on fair faces of brick work or concrete wall surfaces complete all as specified and as directed. Note:- Cost of water proofing compound shall be measured and paid separately

M&L 5mm thick, Rendering in CM 1:3 finished even and smooth without using extra cement on fair faces concrete surface in ceiling complete all as specified and as directed.

Supply only water proofing compound complete all as specified and as directed

M&L 100mm thick, PCC 1:4:8, type D2, using 40mm graded stone aggregate as sin sub base complete all as specified and as directed.

M&L 25mm thick, PCC 1:2:4, type B1, using 20mm graded stone aggregate finished even and smooth using extra cement as in flooring complete all as specified and as directed.

M&L Non skid ceramic coloured tiles, area of each tile exceeding 0.18sqm and not exceeding 0.38sqm (square / rectangle) 7 to 8mm thick mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including 15mm thick cement screed in CM 1:4 as in floors etc complete all as specified and as directed.

M&L Non skid ceramic coloured tiles, area of each tile exceeding 0.18sqm and not exceeding 0.38sqm (square / rectangle) 7 to 8mm thick mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including 10mm thick cement backing coat in CM 1:3 as in vertical surfaces like dado, skirting etc., complete all as specified and as directed.

M&L Non skid ceramic tiles each tile area (square/rectangle) exceeding 0.06sqm but not exceeding 0.11sqm tile thickness 7 to 8 mm, set and joined in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:4 as in flooring etc complete all as specified and as directed.

M&L Glazed ceramic tiles coloured 300x 200x5 to 6mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in CM 1:3 on vertical surfaces such as skirting, dado etc complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, fixing in opening as per specification & drawing complete all as specified and as directed

S&F Factory Made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F Pressed steel frames of size 125 x 60mm with one or more rebates including necessary fixing lugs, lock strike plate etc, for doors including materials and labour for filling the voids with PCC 1:3:6, type C0 using 12.5mm graded stone aggregate complete all as specified and directed

S&F 35mm thick, second class Hard wood, plain, framed, paneled shutters (any number of panels) with panels of timber flat both sides (feather edged) or of veneered particle board medium density, wood particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkats complete all as specified and as directed.

S&F 35mm thick , second class Hard wood, Glazed and skeleton shutters, open rebated prepared to receive glass/gauze etc. edges of framing, divided in to squares with plain chamfered or rounded, fitted with cut mitred beads for securing glass/gauze all as specified and directed. Note : glazing and gauze will be measured and paid separately

S&F steel windows with side hung shutters including projecting type hinges with steel handles, steel peg stay etc with glazing bars dovetail or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handles, steel peg stay etc, complete with out glazing bars dovetailed or welded as fly proof shutters complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F Steel Ventilators with top hung shutters including hinges, steel peg stay, (Box type frame and shutters) including welding complete all as specified and as directed.

M&L Preparation of newly plastered or unplastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and directed by Engineer - in -Charge.

M&L Preparation of newly plastered or unplastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed

M&L Preparation of newly plastered or unplastered wall surfaces and applying two coats of cement based paint over a coat of primer including preparation complete all as specified and as directed.

M&L Preparation of new or old steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide paint complete all as specified and as directed.

M&L Preparation of new or old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer paint complete all as specified and as directed.

M&L 4mm thick, figured glass, pin head type in squares not exceeding 0.5sqm in each pane and glazing with oil putty complete all as specified and as directed.

S&F Mild steel sections as in Chimney bars (straight or camber) bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in steel frames, L or T section supports for shelves etc, including welding and similar articles conforming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F 200mm long, aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed

S&F 300mm long, Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast - aluminium alloy, complete all as specified and as directed

S&F 100mm size, Butt hinges, cold rolled mild steel, medium weight, complete all as specified and as directed

S&F 150mm size, aluminium handles, cast type, anodised, complete all as specified and as directed.

M&L Plain cement concrete 1:3:6, type C1, using 20mm graded stone aggregate as in bed blocks for hold fast, copings etc including use and waste of form work complete all as specified and as directed.

M&L Preparation of the surfaces for treating ends of posts, back of chowkats etc., of area exceeding 0.10sqm but not exceeding 0.50sqm each and treating with coal tar or black bituminous paint complete all as specified and as directed.

M&L Sanding newly tarred surfaces with clean and sharp sand complete all as specified and as directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F PVC low level flushing cistern valve less, syphonic action type, 10 liters capacity, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed

S&F Health faucet (Jet Spray), CP 15mm dia with flexible pipe and fixing nut etc., complete all as specified and as directed.

S&F PVC Connections, 750mm long, PTMT nuts suitable for 15mm bore pipe complete all as specified and as directed.

S&F Bib taps, cast copper alloy, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore complete all as specified and as directed.

S&F Pillar taps, cast copper alloy, chromium plated, fancy type, with capstan heads, screwed down high pressure, screwed for iron pipe of 15mm bore complete all as specified and as directed.

S&F Stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and as directed.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

M&L 15mm bore, GI Tubing, medium grade with all fittings, laid in floor/wall/ceiling etc. complete all as specified and as directed.

M&L 20mm bore, GI Tubing, medium grade with all fittings, laid in floor/wall/ceiling etc. complete all as specified and as directed.

S&F Harrison rails of anodised aluminium alloy fixing with brackets, stops, rollers etc complete all as specified and as directed.

S&F Vitreous china wash basin, white, flat back, size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of supply and fixing waste pipe complete all as specified and as directed.

S&F PVC (SWR) gully traps 125 x 110 mm, setting and jointing with solvent cement including concrete pedestal etc complete all as specified and as directed.

S&F 110mm PVC (SWR) Tee any radius, fitted with oval access door complete all as specified and as directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110mm PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed

S&F 110mm PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, completed all as specified and as directed

S&F 75mm PVC (SWR) pipes single socketed, in any length, with rubber ring joints, fixed to walls/laid in floors complete all as specified and as directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed

M&L Treating the backfill in contact with foundation at the rate of 7.5litre of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

M&L Treating the top surface of filled earth at the rate of 5 liters of emulsion per square metre of surface complete all as specified and as directed.

M&L Treating the soil under plinth protection at the rate of 5 liters of emulsion per square meter of surface area complete all as specified and as directed.

M&L Treating the soil along with the external perimeter of building at the rate of 2.25litre of emulsion per metre of the perimeter wall complete all as specified and as directed

M&L 75mm thick Cement concrete 1:3:6, Type C1 using 20mm graded stone aggregate, finished even and smooth with using extra cement as in plinth protection complete all as specified and as directed.

M&L Precast cement concrete using CC :1:2:4, Type B1 using 20mm graded stone aggregate as in cover slabs (for manholes) and other items and set in cement mortar 1:4 complete all as specified and as directed.

M&L Cement concrete 1:3:6, type C2, using 40mm grade stone aggregate as in bedding to 110mm PVC (SWR) drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

M&L Precast RCC Hume pipe septic tank for 25 users and of dia 1.20m, length 2.40m including transportation, erecting/fixing in position using suitable crane and connecting to sewage line etc complete all as specified and directed by Engineer-in Charge

M&L Precast RCC soakage well of size 900mm dia and 1.50m depth including transportation, erecting/fixing in position using suitable crane and connection to sewage line including necessary loose filling with suitable aggregates etc., complete all as specified and directed by Engineer-in Charge.

Demolition of wall and ceiling boards (fiber pulp, insulation, etc) or insulation boards/blankets any thickness including cover fillets, complete all as specified and directed by Engineer-in Charge.

M&L False ceiling using GI snap grid system with roll-formed out of hot-dip galvanised steel capping (powder coated), main runner 38x24mm, cross Tee 29x24mm and wall angle 24x24mm and thickness not less than 1 mm, members suspended with Hangers 4 mm dia. G.I. (up to 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, with 4mm thick designer ceiling board of any texture as approved by GE, complete all as specified and as directed. Make: Everest ceiling grid system "Regular T-2430" or techno commercially equivalent

S&F in repairs Fancy type Steel PVC Coated, drapery rod of size 20-25mm dia, including fixing of Steel powder coated fancy brackets & end stops 2 Nos in Each opening etc complete all as specified and as directed.

Taking down carefully point wiring of any type (i.e. on wooden batten, surface conduit, casing-N- capping or concealed conduit) for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, conduit etc. including accessories such as wooden gutties/rowel plug, screw etc including making good disturbed surface to match the existing surface all as specified & directed.

M&L Point wiring using with multistranded copper conductor 1.5sqmm nominal cross-sectional area single core, PVC insulated and unsheathed, FRLS cable, 1100 Volts grade, ISI-694 marked with valid CML No. in and including PVC conduit pipe and accessories on wall/roof/floor etc, with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area, single core, FRLS cable as earth continuity conductor to common earth and connecting to earth duly complete all as specified and directed by Engr-in-charge for the following :-

One light point controlled by one switch 5 amps complete all as specified and as directed.

One fan point controlled by one switch 5 amps and regulator complete all as specified and as directed.

One socket outlet 3 pin 5 amps on independent board complete all as specified and as directed.

M&L Point wiring using with multistranded copper conductor 1.5sqmm nominal cross-sectional area single core, PVC insulated and unsheathed, FRLS cable, 1100 Volts grade, ISI-694 marked with valid CML No. in and including PVC casing capping and accessories on wall/roof/floor etc, with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area, single core, FRLS cable as earth continuity conductor to common earth and connecting to earth duly complete all as specified and directed by Engr-in-charge for the following :-

One light point/ceiling fan/Exhaust fan point controlled by one switch 5 amps complete all as specified and as directed.

One socket outlet 3 pin 5 amps on independent board complete all as specified and as directed.

All as per item No 96 hereinbefore but 4.0 Sqmm, FRLS PVC insulated and unsheathed copper multi stranded conductor cable and 4.0 Sqmm FRLS PVC insulated and unsheathed copper multi stranded conductor cable for earth wire for one socket outlet of 15 Amps power points fixed on independent board complete all as specified and as directed.

S&F Switch piano, flush type, single pole, one way, 5 Amp, 240V, 50Hz, AC complete all as specified and as directed.

S&F Switch socket combination, flush type, multi purpose, 2 in 1, 6 Amps, 240V, 50Hz, AC complete all as specified and as directed.

S&F Switch socket combination, flush type, multi purpose, 2 in 1, 5 to 16 Amps, 240V, 50Hz, AC complete all as specified and as directed.

S&F Electronic fan regular, Stepped type, flush type, complete all as specified and as directed.

S&F Bell push piano, flush type, single pole, one way, 5 Amp, 240V, 50Hz, AC complete all as specified and as directed.

S&F Ceiling rose Bakelite with three terminals complete all as specified and directed.

S&F Exhaust fan, steel body. AC single Phase. 230V of size 300m sweep with blades, frame and louvers, materials and labour for fixing of MS nut and bolts with check nuts duly welded a piece of MS rod / flat iron on head of bolts of size 10mm long 04 Nos for exhaust fan mounting and 8mm x 80mm long for fixing of exhaust fan louvers complete all as specified and directed.

S&F ceiling fans with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor complete all as specified and directed.

Supply and replacement of ceiling fan down rod 60 cm long with clamp, lock nut, bolt nut including provision of cable from ceiling rose to connector to fan and suitable colour code 2 Nos conapy complete all as specified and directed.

S&F Calling Bell AC 230 Volt single pole including connection with suitable cable from ceiling rose and all as specified and directed by Engr in Charge.

S&F LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED light fitting, mirror type with high out put diffuser 2 feet, 1 x5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F LED security light made up pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP 66 protection and impact resistance of IK07 of capacity 40 Watts of including connecting cable with suitable GI pipe 40 mm 1.30 mtr bracket with clamp and nut bolt all as specified. Make:- Cat Part No ENDURAPEARLNEOSL40WLED757PASYTOPC of make Havells or tecno-commercially equivalent

Supply and laying well burnt "B" class brick of old size for cable protection complete all as specified and as directed.

Supply and filling in and spreading sand for cushioning and covering of the UG cables in trenches all as specified complete all as specified and as directed.

M&L laying XLPE insulator armoured heavy duty electric cable with aluminium conductor 1100 V grade cross section 6 sqmm 2 core laid in ground/ fixed in wall complete all as specified and as directed.

M&L Cutting the existing road/hard standing made of concrete or premix carpet, WBM, soling and moorum filling including excavating for laying the cable/pipe, width 0.5 Mtr and depth 0.7 Mtr all as directed and making good the road/hard standing using all old/new materials as required at site to match with the existing surface complete all as specified and as directed.

S&F 32mm bore GI tubing light grade, laid in trench/ road/ fixed to pole for cable protection complete all as specified and as directed.

S&F MCB DB, SPN, double door, 4 way, surface mounted and fixed matching with the existing surface and connections complete all as specified and as directed.

S&F MCB, SPN, 32 amps,. complete all as specified and as directed.

S&F MCB, SP, 6 to 32 amps complete all as specified and as directed.

M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground, earth pit not less than 2.25 m deep below ground level, with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel complete with GI pipe Light grade 15mm dia as earth strip protection pipe up to 7.5 mtr length, GI pipe medium grade 20mm dia as watering pipe with funnel and wire mesh, PCC chamber with 10mm thick RCC cover all as shown in electrical plate No 5 connected to earth testing point all as specified or indicated including testing on completion all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deoth for foundation etc and getting out in soft/disintegrated rock complete all as specified and as directed.

S&F 125mm Shower roses, Chromium plated with or without swivel joints, any size including fixed to steel pipe or union complete all as specified and as directed.

SEMBA ELECTRICALS

Rajapriyaconstruction

p.chinnasamy

SENTOOR BUILDERSS

TECKXPERT ENTERPRISES