CONSTRUCTION OF ENGINEERING COLLEGE BUILDING AT GOVT. POLYTECHNIC PREMISES RATNAGIRI, TALUKA AND DISTRICT RATNAGIRI

Amount

Item No.1 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 3.00 m.) By Manual Means

Item No.2 :- Excavation for foundation in laterite rock (soft or hard) including trimming and levelling the bed for the foundation, removing the excavated material up to a distance of 50 metres beyond the building area, stacking as directed, dewatering and back filling with available murum, watering, ramming etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Item No.3 :- Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means

Item No.4 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No.5 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Item No.6 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.7 :-Providing and laying Cast in situ/ Ready Mix cement concrete M-30 of trap metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.8 :-Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.9 :- Providing and constructing laterite stone masonry in cement mortar 1:6 in Foundation and plainth including raking out joints whhen plastering is to be done/Striking joints when no plastering is to done, wateringand scaffolding with all leads and lifts etc. complete. For Ground Floor

Item No.10 :- Filling in plinth and floors with approved excavated materials in 15 centimetre to 20 centimetre layers including watering and compaction complete. For Ground Floor

Item No.11 :- Providing soling using 80 millimeter size trap metal in 15 centimeter. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. For Ground Floor

Item No.12 :-Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.13 :-Providing and laying Cast in situ / Ready Mix cement concrete M-25 of trap metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.14 :-Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap metal for R.C.C. fins of required thickness in position as shown on the drawings or as directed by Engineer-in-charge including steel centering, plywood / steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block) Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.15 :-Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.16 :-Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.17 :-Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)

{ D } For Third Floor

Item No.18 :-Providing and constructing laterite stone masonry in cement mortar 1:6 in superstructure including raking out joints when plastering is to be done/striking joints when no plastering is to be done, watering and scaffolding with all leads and lifts etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.19 :-Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.

{ D } For Third Floor

{ E } For Fourth Floor

Item No.20 :-Providing waterproof plaster in W.C. and bath 20 millimeter thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.21 :-Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimeter thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimeter thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.22 :-Providing internal cement plaster 20 millimeter thick in Single coats in cement mortar 1:4 with neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.23 :-Providing and applying plaster with plaster of paris in 6 millimeter thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.24 :-Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.25 :-Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. with primer coat and also providing and applying two coats of 100% pure acrylic low VOC and APEO and HCHO free water based paint of approved colour that belongs to class 1 flame spread resistance of approved make paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1 millimeter. Paint should have an outstanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC and Odour putty. This surface should be primed with water based low VOC primer. The worj activity should overall aspects of applying paints from surface preparation as directed by Engineer in charge.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.26 :-Providing and laying Polished Kota stone flooring With Hand-Cut Polished Kota Stones 25 millimeter to 30 millimeter thick and required width in plain/diamond pattern on bed of 1:6 Cement mortar including cement float, filling joints with neat cement slurry, curing, cleaning and Mirror Polishing etc. complete Note- Water absorption for kota stone should not exceed 0.05%.( Item to be used with prior permission of Superintending Engineer )

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.27 :-Providing and laying Vitrified MATT finish having decorative type of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc .complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.28 :-Providing and laying vitrified stone effect finish tiles having size 590 to 605 millimeter x 590 to 605 millimeter of 8 to 10 millimeter thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.29 :-Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimeter x 30 centimeter and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.30 :-Providing and fixing machine cut machine polished 18 millimeter to 20 millimeter thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.31 :-Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 millimeter x 450 millimeter size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.32 :-Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.33 :-Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 millimeter to 30 millimeter thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.34 :-Providing and laying vitrified matt fininsh tiles having size 590 millimeter to 605 millimeter x to 605 millimeter of 8 to 10 millimeter thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.35 :-Providing and laying vitrified stone effect finish tiles having size 590 to 605 millimeter x 590 to 605 millimeter of 8 to 10 millimeter thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position laid on a bed of 1:4 cement mortar including required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.36 :-Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimeter thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.37 :-Providing and laying ceramic tiles of having size 30 centimeter x 30 centimeter and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.38 :- Providing and fixing mild steel grill gate with angle iron frame 65 millimeter x 65 millimeter x 10 millimeter with iron bars at 150 millimeter C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. For Ground Floor

Item No.39 :-Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35 millimeter thick style and rail with 25 millimeter thick panels with openable fan light as per detailed drawings. Excluding the door frame 60 millimeter x 100 millimeter stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame)

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.40 :-Providing and fixing single or double leaf panelled door shutter excluding frame with glazed openable fanlight shutter 35 millimetre thick as per detailed drawing consistingpanelled vertical styles 100 millimetre x 35 millimetre and lock and bottom rail 200 millimetre x 35 millimetre and panels 12 millimetre thick both side commercial ply faced particle board including stainless steel fixtures and fastening and T.W. beading at junctions of panel inserts and as instructed by the Engineer in charge including 3 coats of oil painting etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.41 :-Providing and fixing Country cut teak wood single leaf door shutter with teak wood style and rail of 25 millimeter thick including fixing 50 millimeter x 25 millimeter size welded mesh of 10 gauge as per detailed drawing or as directed with stainless steel fixture and fastening finishing with 3 coats of oil painting etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.42 :-Providing and Fixing 30 Millimeter thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6 mm size steel screws including fixture fasting. Complete as per direction of engineer in charge

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.43 :-Providing and fixing in position U.P.V.C. (Unplasticized Poly Vinyl Chloride) having multi-chambered outer frame section (73x50)mm with an outer wall thickness of 2mm & steel reinforcement, multi-chambered slider frame (73x60)mm with steel reinforcement, multi-chambered slider sash (46x82)mm with steel reinforcement designed to give optimum strength, 5mm thick toughened double glass with 12mm spacer of good quality including alluminium track, Inter-locking profile, co extruded beadings, EPDM gaskets, silicon sealent, sliding handle, fixtures and fastenings (couplings, hinges) including with all required screws and nuts with all necessary U.P.V.C. sections as per the detailed drawing and as directed by Engineer-In-Charge etc. complete.el screws including fixture fasting. Complete as per direction of engineer in charge

{ A } For Ground Floor

{ B } For First Floor

Item No.44 :-Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.45 :-Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.46 :-Supplying and fixing of semi utilized structutural glazing System with Aluminium Frame to be done in 114 x 57x 1.5mm thick for mullion & transome to be done in 63x57x1.5mm thick panel section to be used for glass panel with 15/20micron colour anodizing, double side spacer tap to be used for fixing of glass to double side spacer tap to be used for fixing of Glass to aluminium. Dow Corning 995structure silicon shall be used for fixing of glass to aluminium 789 shall be used weather silicon, EPDM and which shall be cladded with 6mm thick blue tinted toughened Glass to be used MS bracket for mullion fixing SS Nut bolts, MS Anchor etc complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.47 :-Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimeter x 40 millimeter x 5 millimeter with oil painting, etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.48 :-Providing and fixing orissa type colour glazed earthenware 625 x 450 Millimeter water clost pan including trap, C.I. soil and vent pipe upto the out side face of wall including 100 millimeter diameter C.I. plug, bend, 15mm. thick 10 litre PVC flushing cistern with all necessary pipe connection etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.49 :-Providing and fixing white european type wall-hung pan, of size 350 millimeter x 355 millimeter x 570 millimeter concealed flush tank with floor-mounting frame installing kit and drain pipe connection set for wall hung WC, with approved make square control plates including soil pipe, vent pipe upto the outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings,cutting & making good walls, floors etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.50 :-Providing and fixing coloured glazed earthenware Wash Hand Basin of 55 centimeter x 40 centimeter size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.51 :-Providing and fixing 10 centimeter Cast Iron Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.52 :-Providing and laying in trenches 15 millimetre diameter CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.53 :-Providing and laying in trenches 20 millimetre diameter CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.54 :-Providing and laying in trenches 25 millimetre diameter CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.55 :-Providing and laying in trenches 40 millimetre diameter CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.56 :- Providing, laying and fixing P.V.C. pipe of 50 millimeter diameter with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. For G.F./F.F./S.F./T.F.

Item No.57 :- Providing, laying and fixing P.V.C. pipe of 75 millimeter diameter with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. For G.F./F.F./S.F./T.F.

Item No.58 :-Providing and fixing 15 millimeter diameter screw down bib /stop tap of brass of approved quality and make, including necessary sockets, union, nuts, testing etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.59 :-Providing and fixing screw down for 40 millimeter diameter wheeled stop tap of brass including necessary sockets/union nut complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.60 :-Providing and fixing screw down for 50 millimeter diameter wheeled stop tap of brass including necessary sockets/union nut complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.62 :- Providing and laying for 150 millimeter diameter salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. For G.F./F.F./S.F./T.F.

Item No.63 :-Providing and fixing chicken mesh of 22 gauge, with about 30 centimeter width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.64 :- Providing internal cement plaster 20 millimeter thick in Single coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete. For Ground Floor

Item No.65 :- Providing and constructing Brick Masonry Inspection Chamber 90 centimeter x 45 centimeter x 90 centimeter including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75 kg with lid and frame fixed in cement concrete. For Ground Floor

Item No.66 :- Providing and constructing Brick Masonry Inspection Chamber 60 centimeter x 45 centimeter x 90 centimeter including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75Kilogram with lid and frame fixed in cement concrete. For Ground Floor

Item No.67 :- Providing and fixing 15 centimeter x 10 centimeter salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. For G.F./F.F./S.F./T.F.

Item No.68 :-Providing and fixing 450 millimeter x 550 millimeter size superior type Belgium mirror with 16 millimeter diameter nickel plated towel rod etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.69 :-Providing and fixing chromium plated towel rod 16 millimeter diameter and 75 centimeter in length including all accessories complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.70 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. For Ground Floor

Item No.71 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper.

Item No.72 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. For Ground Floor

Item No.73 :- Providing and Fixing half turn 25 millimeter diameter gun metal flushing cock including all accessories etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.74 :- Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.75 :- Providing and fixing 900 millimeter high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding ,finishing, buffing to stainless steel pipe etc. complete

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.76 :- Providing water proof bedding for flooring of Bath and W.C. 25 millimeter thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.77 :- Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.78 :- Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters.

{ D } For Third Floor

Item No.79 :- Providing and fixing white glazed earthenware sink 600 millimeter x 200 millimeter x 450 millimeter including all connection of the G.I. supply and P.V.C. waste pipes up to the outside face of the wall, cold water chromium plated screw down bib tap, rolled steel or C.I. brackets, rubber plug with chain and stop tap complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.80 :-Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 millimeter thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m )

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.81 :- Providing leather finished polishing to Kota / Marble / Shahabad / Kadappa Stone slab by continuous grinding in 4 coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

{ D } For Third Floor

Item No.82 :- Providing soak pit of size 120 centimeter x 120 centimeter x 120 centimeter including excavating and filling with brick-bats. For Ground Floor

Item No.83 :- Providing and Fixing Processed Stone Cladding on wall surface/plywood surface. RCC pardi/Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silicas and, Cement, GFRC admixtures, Colour pigments, Fiber upto thick of 230mm/25mm including scaffolding, fixing of screw, etc.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.84 :- Providing and fixing black kadappa stone as shelves 25 millimeter thick machine polished, extending the polish upto 20 centimeter width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.85 :- Providing and laying chequered tiles of approved quality of size 30 centimeter x 30 centimeter, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. For Ground Floor

Item No.86 :- Dry wall cladding with clay tile; Designing, supplying and fixing of Clay tile of Wiener berger (Red Series or Grey Series) or Equivalent with suitable size and thickness not less than 20mm as per manufacturer with approved colour and pattern with composition of finest powdered clay and colour mixtures. The clay tile shall be fixed on the suitable farming system by using continuous aluminium profiled section as per manufacturer with suitable size and spacing to with stand the structural design criteria specifled in the technical specification by using necessary HDG brackets, SS316 grade anchor bolts etc as per manufacturer specification. Cladding joints should be with open groove system. with prior approval of concerned Superitending Engineer.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.87 :- Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450 millimeter diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Item No.88 :- Providing and fixing P.V.C. Rain water pipes of 110 millimeter outer diameter and having wall thickness of 2.2 to 2.7 millimter confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. For G.F./F.F./S.F./T.F./F.F.

Item No.89 :- Providing and fixing 100 millimeter diameter chromium plated brass showers rose to 15 millimeter diameter supply pipe including necessary bend and socket complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.90 :- Providing and laying Rough Shahabad Stone Flooring 25 millimetre to 30 millimetre thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete. For Ground Floor

Item No.91 :- Providing and fixing lightening conductor system comprising of erecting Air-Termination consisting of tubular copper rod of 25 millimetre diametre 1.2 millimetre thick with multiple points head 1.2 metre long ( Heavy Duty) welded or clamped to G.I. pipe pole B grade 50 millimetre diametre of requiired length with M.S. round bnase plate 25 millimetre diametre and 10 millimetre thick at bottom embeded in cement concrete 1:3:6 dfoundation of size 45 centimetre diametre x 45 centimetre Height and providing earthing with copper earth plate of size 60 x 60 x 0.3 centimetre with cadmium plated nut bolts to fix earthing strip burried in specially prepared earth pits 1.5 metre below ground level with 40 kg charcoal and salt with altemate layers of charcoal and salt and G.I.pipe 40 millimetre diametre 2 meter length burried in earth upto earthling plate remining portion above ground level for watering and refilling complete.

Item No.92 :- Providing and fixing copper strip 25 millimeter wide and 3 millimeter thick for lightening conductor including fixing with screws required scaffolding etc.complete Note- Lightening conductor and earthinf pits is not considered in this item

Item No.93 :- Providing and fixing 40 millimeter diameter and 1.5 millimeter thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.94 :- Providing and fixing white glazed earthenware full stall type Urinal with PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 millimeter diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.95 :- Providing and fixing machine cut mirror polished 18 millimeter to 20 mmillimeter thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . (Partition of Both side polish.)

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.96 :- Providing and fixing UPVC Roof made up of 3 layers roofing material of thickness 2 mm having width of 1130mm and of required Length having Tensile strengh not less than 330 Kilogram/cm2, including fastening with self drilling screw having washers made of stainless steel etc. complete.

{ D } For Third Floor

Item No.97 :- Providing and fixing stainless steel sink of size 600 x 510 x 200 millimeter incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

Item No.98 :- Providing Expansion joints in RCC framed structure (interior column) with plain premoulded fixing T.W. bettens on rear faces etc. complete as directed.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.99 :- Providing Expansion joints in RCC framed structure (exterior Column) with plain premoulded fixing T.W. bettens on rear faces etc. complete as directed.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

{ D } For Third Floor

Item No.100 :- Providing Expansion joints in RCC framed structure (At floor level) with plain premoulded fixing T.W. bettens on rear faces etc. complete as directed.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.101 :- Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.102 :- Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 millimetre x 1.22 millimetre box type, 5 millimetre thick sheet glass louvers, of approved quality etc. complete.

{ A } For Ground Floor

{ B } For First Floor

{ C } For Second Floor

Item No.103 :- Supplying and erecting UPVC reinforced flexible conduit 20 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.

Item No.104 :- Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.

Item No.105 :- Supplying and erecting HMS PVC conduit 20 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON.

Item No.106 :- Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Item No.107 :- Supplying and erecting PVC trunking (PVC casing-ncapping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.2

Item No. 108 :-Supplying and erecting PVC trunking (PVC casing-ncapping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.2 (EI 6060+Lan2568

Item No.109 :- Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall /ceiling as per specification No: WG-MA/CON.

Item No. 110 :- Supplying & erecting mains with2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Item No.111 :- Supplying & erecting mains with1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Item No.112 :- Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Item No.113 :- Supplying & erecting mains with1x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Item No.114:- Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Item No.115:- Supplying & erecting mains with 4x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Item No.116:- Supplying & erecting mains with 1x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Item No.117:- Supplying & erecting mains with 4x6 sq.mm F.R copper PVC insulated wire laid in provided conduit / trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Item No.118:- Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Item No.119:- Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Item No.120:- Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Item No.121:- Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Item No.122:- Supplying and erecting ISI mark modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Item No.123:- Supplying and erecting ISI marked modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Item No.124:- Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. Note: Add Rs 57/- for additional two module box with double mounting plate if required.

Item No.125:- Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 modules duly erected.

Item No.126:- Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 modules duly erected.

Item No.127:- Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 modules duly erected.

Item No.128:- Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 modules duly erected.

Item No.129:- Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected.

Item No.130:- Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Item No.131:- Supplying & erecting telephone copper cable 2 pair with 0.5 mm dia. laid in provided PVC casing capping/ conduit as per specification No. WG-TW

Item No.132:- Supplying & erecting telephone copper cable 20 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

Item No.133:- Supplying & erecting telephone copper cable 50 pair with 0.5 mm dia. laid in provided PVC casing capping / conduit as per specification No. WG-TW

Item No.134:- Supplying, erecting & commissioning junction box suitable for 20 pairs as per specification No. WG-TW

Item No.135 :- Supplying, erecting & commissioning junction box suitable for 50 pairs as per specification No. WG-TW

Item No.136 :- Supplying, erecting & commissioning junction box suitable for 100 pairs as per specification No. WG-TW

Item No.137 :- Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification No. WG-TW

Item No.138 :- Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 24 extensions suitable upto 96 extensions complete.(4 additional 16ext. Card)

Item No.139 :- Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount unit as per specification complete

Item No.140 :- Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID unit as per specification complete.

Item No.141 :- Supplying & installing UTP networking cat-6 cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC

Item No.142 :- Supplying and fixing 1 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Item No.143 :- Supplying and fixing 3 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Item No.144 :- Supplying, fixing, and configuring ethernet managed ethernet switch of 24 ports with 2 SFP + 2 combo port and web view/CLI on provided rack or as directed as per specification no. WG-NWC/GBS

Item No.145 :- Supplying, fixing, and configuring broadband ADSL router with all accessories, on provided rack or as directed as per specification No. WG-NWC/ADSL

Item No.146 :- Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Item No.147 :- Supplying and fixing tool-less Information Outlet (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Item No.148 :- Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Item No.149 :- Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 450x550x367 mm) as per specification No. WG-NAS/RAK

Item No.150 :- Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600x600mm suitable for 36 W-40W with provision for plane front frame with translucent cover fixed to the housing complete.

Item No.151 :- Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.

Item No.152 :- Supplying and erecting Ding Dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden /sunmica block of suitable size

Item No.153 :- Supplying and erecting LED street light fitting suitable for above 70W- 75W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS2

Item No.154 :- Supplying and erecting street light Wall bracket made from 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB

Item No.155 :- Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF

Item No.156 :- Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Item No.157 :- Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.

Item No.158 :- Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Item No.159 :- Supplying, installing, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2 TR capacity having ISEER minimum 4.50 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R410 A /R32 and copper condenser at position. specification no. APAC/ SAC

Item No.160 :- Supplying & erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 12 mm complete.

Item No.161 :- Supplying & erecting soft drawn copper pipe suitable for refrigeration system having 22 SWG thickness and inner dia / size 16 mm complete.

Item No.162 :- Supplying, erecting, testing and commissioning self-contained water cooler 230/250V 50 cycles nominal cooling capacity of 40 litres/hr and storage capacity 80 litres with partially stainless steel body complete. specification no. APWCR/ WC

Item No.163 :- Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps, storage capacity of purified water 7 to 8 litre with activated carbon filter and softener operating on 230 V single phase A.C. supply.

Item No.164 :- Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater system.

Item No.165 :- Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for over coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 16 mm for solar water heater system.

Item No.166 :- Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB

Item No.167 :- Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB

Item No.168 :- Supplying, erecting & marking DPMCB 40A to 63A, C- series (for motor/power) in provided distribution board as per specification No.SW-SWR/MCB (For Workshop 94+31)

Item No.169 :- Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification no. SW-SWR/MCB

Item No.170 :- Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Item No.171 :- Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification no. SW-SWR/MCB

Item No.172 :- Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB (for DB 51,For Workshop 46)

Item No.173 :- Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 poles, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Item No.174 :- Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 poles, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SW-SWR/MCBDB

Item No.175 :- SSupplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 12 poles/phase (36 poles) on iron/ GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Item No.176 :- Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SP / TP MCBs of 36 poles/12 ways, on iron/ GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Item No.177 :- Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Item No.178 :- Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Item No.179 :- Providing & erecting 3 Pole MCCB of 200A,415V capacity with short circuit rating 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Item No.180 :- Providing & erecting 4 Pole MCCB of 800A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Item No.181 :- Providing, erecting & commissioning RCCB only of electro magnetic type with 30/100/300 mA sensitivity and having capacity of 40A2 pole complete as per specification No. SW-RCCB/RCCB

Item No.182 :- Providing, erecting and commissioning 4 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 40A complete as per specification no. SW-RCCB/RCCB

Item No.183 :- Providing, erecting and commissioning 4 pole RCCB of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 80A. complete as per specification no. SW-RCCB/RCCB

Item No.184 :- Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of ena mel paint. size - (2x0.45)x5+ (4x2)x2= 4.5+16= 20.05 Sq.Mtr

Item No.185 :- Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. 1010 KG For Panel + AC Stand 530 = 1540

Item No.186 :- Supplying and erecting of any size electrolyte copper patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity with 99.9% copper purity with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB

Item No.187 :- Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Item No.188 :- Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Item No.190 :- Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

Item No.191 :- Supplying and erecting 175kVAr, 440 V three phase, 50 Hz., thyrister switched micro APFC passive filter panel, consisting of suitable steps of APP type capacitor units with harmonic filter reactors, as per specification no CP-ED/APFC

Item No.192 :- Supplying, erecting & terminating XLPE armoured cable 3½core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Item No.193 :- Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Item No.194 :- Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Item No.195 :- Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Item No.196 :- Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Item No.197 :- Supplying, erecting & terminating XLPE armoured cable 4 core 16 sq. mm. copper conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Item No.198 :- Supplying & erecting FRP box of size 150mm x 125mm x 100 mm, 2.7 mmthick complete on pole/wall as per specification No. CB-SB

Item No.199 :- Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories.

Item No.200 :- Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 200 mm width & 20 mm height complete with necessary hardware in approved manner

Item No.201 :- Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Item No.202 :- Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI ( 10 for panel + 4 For Lift )

Item No.203 :- Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP.(25x5 patti weight 1.10kg/mtr x64 Mtr

Item No.204 :- Supplying and erecting Annealed bare copper wire of high purity of different sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws in an approved manner. (0.1155 Kg Mtrx 80 Mtr)

Item No.205 :- Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Item No.206 :- Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW (Modular Fan Point)

Item No.207 :- Wiring for plug on board with Modular type Switch socket, copper wiring and earthing as per specification No: WG-PW/SW

Item No.208 :- Supplying and erecting HMS PVC conduit 20 mm dia. with PVC accessories on wall / ceiling as per specification No: WG-MA/CON

Item No.209 :- Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

Item No.210 :- Providing and fixing high-density polyethylene (HDPE) container one piece moulded water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres

Item No.211 :- Supplying, erecting & marking FPMCB 6A to 32A in provided distribution board as per specification no. SW-SWR/MCB

Item No.212 :- Supplying and erecting GI sheet 1.6 mm (16 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint.

Item No.213 :- Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Item No.214 :- Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Item No.215 :- Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.(25x3mm flat,0.59Kg/Mtr,x44Mtr=25.96=26.00Kg

Item No.216 :- Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts grouted in wall complete.

Item No.217 :- Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall.

Item No.218 :- Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.

Item No.219 :- Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.

Item No.220 :- Supplying and erecting fully Automatic star/delta starter suitable for 12.5 H.P. to 15 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame.

Item No.221 :- Supplying, installing, testing and commissioning with perfect aligning, proper levelling of booster pump of 900 LPM at 40 m Head, 12.5 HP (10 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/BP

Item No.222 :- Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Item No.223 :- Supplying and erecting G.I. pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings complete as per specification no. FF-PP

Item No.224 :- Supplying & erecting cast iron double flange butterfly valve of size 100 mm dia. complete as per specification no. FF-VL/BFV

Item No.225 :- Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Item No.226 :- Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) fitted with necessary accessories complete as per specification no. FF-FFA/HV

Item No.227 :- Supplying fire fighting reinforced rubber lined (R.R.L.) hose pipe, 63mm dia, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Item No.228 :- Supplying & erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF-FFA/NZ

Item No.229 :- Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV(for fire hydrant 3 No

Item No.230 :- Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG (for hydrant 3

Item No.231 :- Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Item No.232 :- Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.

Item No.233 :- Supplying, installing, testing and commissioning manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP

Item No.234 :- Supplying, installing, testing and commissioning hooters with CRCA enclosure complete as per specification no. FF-FAAS/HTR

Item No.235 :- Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Item No.236 :- Supplying, installing, testing and commissioning of 2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FF-FAAS/FACP

Item No.237 :- Supplying, erecting, testing and commissioning amplifier 120 W for public address system suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR

Item No.238 :- Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification no. FF-PA/SOC

Item No.239 :- Supplying, erecting, testing and commissioning microphone complete as per specification no. FF-PA/MIC

Item No.240 :- Supplying, erecting, testing and commissioning stand for microphone complete.

Item No.241 :- Supplying, erecting, testing and commissioning of 2 core shielded microphone cable complete as per specification no. FF-PA/MCC

Item No.242 :- Supplying, erecting, testing and commissioning of 1 sq mm speaker wire complete.

Item No.243 :- Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete (Cost of wooden box is included) For Pump.

Item No.244 :- Supplying and erecting submersible pump set suitable for erection on open well of 2.25 KW/3 HP with 415 V 50 c/s.A.C. supply, having delivery head from 21 to 7 m and discharge from 200 to 800 Itrs. per minute (Max efficiency at 16 m head & 500 Itr discharge) & pipe of Suction 50mm /Delivery 50 mm diameter erected with necessary H type clamps as per specification no. WP-OSP

Item No.245 :- Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification no. SW-SWR/MCB

Item No.246 :- Supplying and erecting four pole metal clad ON LOAD change over switch 415V, 40A erected on angle iron / GI frame complete.

Item No.247 :- Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Item No.248 :- Providing & erecting epoxy straight through joint outdoor/indoor for LT XLPE armoured cable 2.5 to 16 sq. mm. cable, with necessary material as per specification no. CB-JT/LT

Item No.249 :- Supplying, erecting & terminating XLPE armoured cable 4 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/CU

Item No.250 :- Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Item No.251 :- Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP

Item No.252 :- Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.

Item No.253 :- Supplying and erecting CI flange 50 mm.dia with necessary nuts bolts and washers with rubber seal in position complete.

Item No.254 :- Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.

Item No.255 :- Supplying and erecting flat flexible 3 core 6 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Item No.256 :- Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/ centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc

Vasant Construction Co