COMPLETION OF INCOMPLETE AND BALANCE WORKS FOR PROVN OF WALL AND ALLIED INFRASTRUCTURE AT DRUGMULLA

Amount

Sch 'A' Part-I Sec-I (Fully Incomplete Building works) carried forward from pre-priced Schedule.

Sch 'A' Part-I Sec-II (Partially Incomplete Building works) carried forward from pre-priced Schedule.

Sch 'A' Part-II (Internal Water Supply works) carried forward from pre-priced Schedule.

Sch 'A' Part-III (Sec-I) (Internal Electrification) carried forward from pre-priced Schedule.

Sch 'A' Part-III (Sec-II) (Internal Electrification) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

LED tube light fitting with tube, 1 x 20w, 230v of Make Surya Cat Part No : SLE BT 20W or equivalent in Bajaj/Philips.

LED tube light fitting with tube, 1 x 8w, 230v of Make Surya Cat Part No : SLE BT 8W ARROW or equivalent in Bajaj/Philips.

LED lamp, 1 x 5w, 230v of Make Surya or equivalent in Bajaj/Philips.

Ceiling fan of size 1200 mm sweep having (BEE 5 star rating) complete and connecting up including provision of with copper standard conductors cables from ceiling rose/connector to Fan, complete all as directed. Make : Bajaj / Havells / CG / Philips

Exhaust fan of 250mm sweep of cat part No Ventil air - DX WHT/BLK of make Havells of equivalent in Bajaj/CG.

MCB DB SPN 2 way in sheet metal enclosure 240 volts, 50 Hz, with IP-42 protection, single door with out bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified including taking down of old one. (Make - C&S cat part No CSDBMCBEDP or equivalent in Havells/ Legrand)

MCB DB SPN 6 way in sheet metal enclosure 240 volts, 50 Hz, with IP-42 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified including taking down of old one. (Make - C&S cat part No CSDBSPNSDA 06 or equivalent in Havells/ Legrand).

MCB single pole & neutral of 6 to 32 Amps, 240 volt complete all as directed. Make : Cat Part No CSMBIC6-32 N of C&S or equivalent of Schneider, Legrand, Havells.

MCB single pole of capacities 0.5 to 5 Amps, 240 volt complete all as directed. Make : Cat Part No CSMBIC 0.5-5 of C&S or equivalent of Schneider, Legrand, Havells.

MCB single pole of capacities 6 to 32 Amps, 240 volt complete all as directed. Make : Cat Part No CSMBIC 6-32 of C&S or equivalent of Schneider, Legrand, Havells.

Sch 'A' Part-IV (Sewage Disposal Works) carried forward from pre-priced Schedule

Sch 'A' Part-V (Area Drainage Works) carried forward from pre-priced Schedule.

Sch 'A' Part-VI (Road/Path/Culvert Works) carried forward from pre-priced Schedule.

Schedule 'A' Part-VII Sec I (Compound Wall , Fencing & Gate) carried forward from pre-priced Schedule.

Schedule 'A' Part-VII Sec-II (Compound Wall, Fencing & Gate) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

M&L for Mild steel work of MS flat iron tie for anchor to column and brick wall etc conforming to IS 290 grade E-165 including one shop coat of primer complete all as specified and directed.

S&F for Punched tape concertina coil of diameter 1050 mm complete all as specified , shown on drawing and as directed.

Schedule 'A' Part-VIII (Protective Works) carried forward from pre-priced Schedule.

Schedule 'A' Part-IX (External Water Supply Works) carried forward from pre-priced Schedule.

Schedule 'A' Part-X Sec- I (External Electric Supply Works) carried forward from pre-priced Schedule.

Schedule 'A' Part-X Sec- II (External Electric Supply Works) Note : This schedule is not estimated by MES and the estimated rate indicated as "Rs. 0.00" under Col.5 signifies this fact only.

LED LIGHT 80W complete with all accessories of make HAVELLS CAT Part No LHEPCOU7IN7J080 or equivalent in Philips/Bajaj.

Security light bracket made of GI tubing 40mm dia light grade bent to shape at an angle of 120 degree suitable for above mentioned street light fittings with necessary MS clamps with one coat of red oxide andn two coats of aluminium paint including nut, bolt, washer etc complete all as specified and directed.

Manual rotating 400 w 24 volt halogen search light (CS mounted) for fixing over watch towers roof stand shall be, suitable to mount search light on roof of the watch tower with 1m distance piece, uni- directional single lever to rotate with cabin, hardware in SS, all metal parts having Ni-Cr/Zn electro plated for out door installation. (Make Kalin model No RSL-LRF25SS/G40 or equivalent).

Solar stand alone street lighting system comprising of LED luminaries 15 watt, LED fitting epoxy powder coated with aluminimum housing , toughened clear glass cover, inbuilt charge controller, auto switch built in for dusk to dawn operation including mounting bracket, Inverter of sine wave type solar PV panel having PV module containing crystalline silicon solar cells of rating 100 Wp, solar low maintenance flooded type battery of capacity 12 V 75 Ah, 75% of rated capacity of battery shall be between fully charged and load cut of condition, battery backup for 02 days including GI battery box, mounting shall be on anti corrosive galvanized pole of 50 mm dia, height 6 mtr complete all as directed. Make : Bajaj/ Philips/ TATA BP.

PVC insulated, unsheathed, multi stranded copper conductor, 2.5 Sqmm 2 core and one run of 1.0 Sqmm multi stranded copper conductor for earthing complete all as directed.

Junction box of size 300x300x250 mm made of MS Sheet 1.6 mm thick, front door openable with fixing screw powder coated including aluminium bus bar 4 Nos of size 25x3mm mounted on epoxy based post insulators and drilled holes for connection including 01 Nos MCB SPN 6 Amps incl magnetic lock system and fixed to poles using MS strip of size 32x6mm and nuts & bolts of required size complete all as directed.

Supply install testing and commissioning of factory made cubical outdoor LT distribution panel conforming to IP-54 complete weather proof and vermin proof the outer shell, shall be of 3.15 mm thick sheet with partitions and switch enclosures door of 2 mm thick overall 2 mm thick CRCA sheet powder coated all as per IS .It shall be mounted on 50x50x5 mm angle frame duly painted with two coats of enameled paint on a coat of red oxide primer with a clearance of at least 0.45 mtrs above GL, Markings shall be made to identify incoming and doutgoing circuits. Outdoor feeder pillar box comprising of following :-

Supply install testing and commissioning of factory made cubical outdoor LT distribution panel conforming to IP-54 complete weather proof and vermin proof outer shell shall be 3.15 thick MS sheet with partitions and switch enclousers door of 2 mm thick CRCA sheet powder coated all as per IS .It shall be mounted on 50x50x5 mm angle frame duly painted with two coats of enameled paint on a coat of red oxide primer with a clearance of at least 0.45 mtrs above GL, Markings shall be made to identify incoming and outgoing circuits. Outdoor feeder pillar box comprising of following :-

Supply, installation, testing and commissioning of silent diesel engine driven generating set developing BHP water cooled of capacity 82.5 KVA (66 KW), 415 volts, 0.8 power factor, mounted on common base frame coupled, 1500 RPM, with silencer pipe protected with asbestos rope independently supported from engine to outside of power house upto 1.00 mtr, AVM pads, foundation as per manifactures design, battery start with suitable cable for connection from DG set to panel board complete with acoustic enclosure as per specification of pollution control board and including the following :- (a) PRIME MOVER. Vertical diesel engine of suitable capacity having 126.60 BHP (Engine model No 4G11TAG23 of Greaves Cotton Ltd or equivalent ) water cooled, closed circuit as per BS-649 or IS 10002. The DG set shall be capable of running 24 hrs continously with 10% over5loading for one hour in every 12 hours as per BS-5514/BS-649. Engine shall be equipped with all standard fitting as per manufactures recommendations and mounted on common base frame with following fittings :- Contd......./-

(i) RPM cum hour meter. (ii) Battery charging ammeter. (iii) Ignition key and starting with push button switch. (iv) Lubrication oil pressure gauge. (v) Electronic Governor controlling. (vi) Oil temp gauge. (vii) Safety control (Trip) for the following :- (aa) Low lubricating oil pressure. (ab) Over speed. (ac)Lub oil coolant heater to avoid freezing. (ad) 24 volts starting equipment compresing of all followings : (ac) 01 No 12 volts 180 AH battery Make : Exide/Standard/Furukawa/Amaron (b) Alternator : The above engine will be coupled through flexible coupling on an indigeneous alternator mounted on a strong steel fabricated common base frame suitable for mounting in an acoustic enclosure. The alternator will be 3 phase, 50 Hz, 1500 RPM self regulating and self exciting type and generating 82.5 KVA output at 0.8 PF, 4 wire, 415 V AC supply under NTP condition with provision of 10% overload for 1hr in every 12 hrs running at 1500 RPM, the alternater shall be screen protected and fitted with shield ball/ roller bearing conforming to BS 2613/IS:4722. Contd......./-

LT feeder pillar box outdoor type with TPN aluminium bus bar 200 Amps rated of size 0.75x0.5x0.3mtr made of MS sheet 3.15mm thick mounted on angle iron frame of size 25x25x3mm height of the feeder piller box should be 60cm above of the ground level and the lower portion of the angle iron frame should be 30cm below ground level, incl necessary PCC foundation including painting with two coats synthetic enamel paint over a coat of red primer work complete all as specified and directed.

LT End termination heat shrinkable type Joint 1100 V Grade suitable for XLPE cable of size 3.5 core 70 sqm complete all as directed.

LT End termination heat shrinkable type Joint 1100 V Grade suitable for XLPE cable of size 3.5 core 35 sqm complete all as directed.

LT End termination heat shrinkable type Joint 1100 V Grade suitable for XLPE cable of size 4 core 10 sqm complete all as directed.

Sch 'A' Part-XI (Site Clearance and Earth work) for works covered under Sch 'A' Part-II to X) carried forward from pre-priced Schedule.

Sch 'A' Part-XII (Defective & Misc Works) carried forward from pre-priced Schedule.

M/S ALBURAQ INFRATECH PRIVATE LIMITED (BID ID -3133934)

ALCO Engineers Private Limited (BID ID -3146497)