CWE/D-34/2023-24

Amount

Taking down cement plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water all as specified and directed by engnr-in-charge.

M&L for rendering 10mm thick Ready Mix Plaster in cement mortar (1:6)mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperately

M&L for rendering 15mm thick Ready Mix Plaster in cement mortar (1:4) mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats on brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shall be measured and paid seperately

M&L for rendering 5 mm thick Ready Mix Plaster on ceiling concrete surface, finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of white chalk whiting, complete all as specified and directed.

M&L preparation of newly plastered ceiling surfaces of any description and apply three coats of white wash all as directed and specified.

M&L preparing of newly plastered surfaces and applying two or more coats of 100% Premium accrylic emulsion paint having VOC less than 50gm/L and UV resistance as per IS 15489:2004, Alkali and fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43l/10sqm and icluding priming coat of exterior primer applied @0.90L/!0sqm over new surfaces all as specified and directed.

M&L preparing of old plastered surfaces and applying two or more coats of 100% Premium accryliv emulsion paint having VOC less than 50gm/L and UV resistance as per IS 15489:2004, Alkali and fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43l/10sqm all as specified and directed.

M&L Preparing plastered or unplastered old decorated surfaces of walls and applying two coats of oil bound distemper all as specified and as directed by Engr-in-Charge.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white wash complete all as specified and directed.

Material and labour preparation of old/previously treated wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint all as directed and specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets/ Metal/Aluminium ceiling frame complete all as specified and directed

M/L exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600mm grid and 6mm thick complete all as specified and directed by Engr-in-Charge. (Note : frame work for ceiling shall be measured and paid seperately)

M&L Anodised aluminium snap grid frame work of size 605x605mm for flase ceiling including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab/truss by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and hinging arrangement and making good at surface all as specified and directed

Taking down chowkhats or frames with shutters(without taking off shutters from the frames) not exceeding 1.5 sqm and remove from site as directed and specified.

All as per item above here-in-before but exceeding 1.5. sqm but n.exc 4 sqm each and -ditto- complete

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and refixing in same position complete all as specified and directed.

Supply and fix for 35 mm thick 2nd class hardwood plain, framed, panelled door shutters (any numberer of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats.

S&F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed.

S&F aluminium (extruded section) body door closer hydraulically regulated designation no. 1 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg anf fixed all as specified and directed.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixedas diected and specified.

S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S & F Aluminium, anodised, barrel tower bolts 150mm long of extruded section and fixed as diected and specified..

Supply and fix Aluminium handles, cast type, anodised size of handle 150mm as diected and specified.

M&L roughening concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc incl taking down tarfelt and brushing neat cement slurry @3Kg/Sqm incl 20mm thick screeding in Cement mortar (1:4) finished even and smooth and M&L for preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co elastic technology (CET) based on modified polyurethane and fully fibre reinforced, having Sun Reflectivity index (SR) of 109 on top of concrete roof surfaces. All cracks up to 3 mm at corner joints, channel and parapets should be treated with crack seal. Applying three coats including one coat of primer of ShaliUrethane BTD/ Sikalastic 560/ smart care damp proof-ultra having coverage @ min 0.75kg/m2 and dilution up to 10% and laying reinforced fiber net and applying two coats (without dilution) of shaliUrethane BTD/Sikalastic 560/smart care damp proof ultra @ total consumption 2 kg/m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant (Note :6 Hrs interval between two coat will be maintained). All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system. Note:- Application of water proofing treatment will be done by Authorised Applicator only. (i) The water proofing treatment shall be carried out by the manufacturer or their authorized applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However, contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

M&L for 15 mm thick cement plaster over the concrete / brick roof surfaces in cement mortar 1:4 mixed with liquid water proofing compound @ 200ml per bag WPC (liquid type) , surface finished even and smooth without using extra cement all as specified and directed. Note :- Water proofing additive shall be measured and paid separately.

Taking down 15mm bore steel tubing and connections including cleaning for re-fixing or removal to store as diected and specified..

All as per item No 29 here-in-before but 20mm bore and -ditto- complete as diected and specified.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,

S&F of 20 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,

S & F in repair bib taps cast copper alloy fancy type C.P 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified.

Supply and fix PVC connections 15mm bore with PTMT nuts with washers of length 600 mm as diected and specified..

Supply & Fix grating square 150mm size of PTMT all as directed and specified

S & F in repair angular stop cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.

S&F in repairs stainless steel curtain rods fancy type size, and pattern as approved 20 mm dia with gold colour knobs at both ends including sliding system and arrangment for sheer curtain complete all as directed.

S&F in repair vitreous china wash hand basin of size 550mm x 450mm, incl fixing to wall with brackets etc complete all as directed and specified. (Make -Hindware/cera)

S&F in repair Pillar taps, cast copper alloy fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, aluminium snap beading, screws, aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

M&L Waste fitting brass CP for 32mm with long screwed shanks and fly nut flange complete and fixed.

M&L Waste fitting brass CP for 40mm etc with long screwed shanks and fly nut flange complete and fixed.

Demolition of cement concrete of any description and in any position(unreinforced) in ground floors below or above ground level n.exc 15 cm thick all as directed and specified.

M&L 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and as directed.

M&L glazed ceramic coloured tiles size 450x300x7mm/350x250x7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in CM (1:4) including dismantling complete all as specified and directed.

M&L non skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified and directed.

M&L Vitrified ceramic tiles 10 mm thick square/rectangular light shade texture polished,area of each tiles Not exceeding 0.36 sqm,in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:6) including dismantling complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified.

S&F solid door frame 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete.all as specified and directed.

Dismantling Water tanks of capacity exceeding 500L but not exceeding 1000L complete all as specified & directed.

S&F PVC water tanks 1000 ltr cap rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for Iron pipe 20mm bore

PCC 1:4:8 type D-2 as in sub base of flooring 75 mm thick all as specified and directed by Engr-In-Charge.

M & L for sand under floors or in foundations including watering as required all as specified and directed by Engr-In-Charge.

M & L for machine pressed precast concrete interlocking payer block any shape and size confirming to IS -15658-2006 of 60 mm thickness (M-35 Grade) with grey cement and no pigment all as specified and directed by Engr-In-Charge.

M&L cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate as in coping, bed blocks, kneelers, apex stones, bed plates, kerbs including bending, weathering, slightly rounded or chamfered on edges complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (padestal pattern) white colour closed pattern including soft closing black seat cover all as specified and directed.

Supply only PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete.

S&F in repair water closet squatting pan ``Orissa pattern`` 580 mmx440 mm, white with integral foot rests including fixing charges of flushing cistern, connection to trap, anti syphonage pipe and provn of lime concrete etc complete all as specified.

S & F in repair 20 mm dia brass CP towel rail 600mm long all as specified and directed by Engr in Charge

S & F in repairs CP health faucet hygienic spray (2in 1 facucet with 1.0M long tube) complete all as specified.

S& F in repair 15 mm dia Central hole basin Brass CP mixer formixing hot & cold water screwed down for iron pipe and fixed .

S&F in repairs 15 mm wall mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F box type mild steel windows gauzed/ glazed incl frame made of hollow sections 60 x 25 x 1.25 mm thick 50 x 20 mm x 1.25 mm thick MS Hallow pipes as in windows shutter with sash bars incl 150 mm size MS tower bolts 2 No each leaf, MS handle made of Z section 100 mm long 2 Nos each leaf, mild steel cleat 55 mm x 25 mm x 75 mm long 2 Nos each leaf, MS Pintel hing 75 mm long 14 mm dia 02 Nos each leaf complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc 0.5 Sqm in each pane as directed and specified

Supply and fix Galvanised mild steel wire cloth of 0.56 mm nominal dia of wire, average width of apparature 1.18mm & fixed with tinned tacks or galvanised wire staples as diected and specified.

Demolition of cement concrete in roof floor (other than ground floor) beams, staircase, landing, chajja and smilar work complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia and over cut to length bent to shape required incl cranking,bending, spirally, hooking and binding with and incl MS wire 0.9 mm dia complete all as specified and directed.

All as per item No-70 above here-in-before but 6 mm to 8 mm dia and -do- complete all as directed and specified.

M&L for reinforced cement concrete 1:2:4 (Nominal mix) type B-1 using 20 mm graded crushed stone aggregate as slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc at roof level of bldg complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hangings; also fastening and fixing complete, Fe 410 -W (Gde-E-250) quality-A all as specified and directed

Demolition of brick work built in cement mortar including all quoins, arches, pillers etc all as specified and directed..

M&L for brick work in CM 1:6 with using subclass 'B' bricks, old size straight or curbed on plan exc 6 m mean radius complete all as specified and directed by Engr-in-Charge..

Dismantling and breaking up old PVC/cast iron drain pipes of 100mm dia jointed in cement mortar and taking out of trenches and removing materials from site of work complete all as specified.

S&F 75mm bore cast iron soil, waste and vent spun pipes, in any length with or without ears, with cement joints, fixed to walls, complete all as specified.

S&F 100mm bore cast iron soil, waste and vent spun pipes, in any length with or without ears, with cement joints, fixed to walls, complete all as specified.

S&F 100mm bore cast iron soil, waste and vent spun pipes, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F in repair 110mm bore PVC(SWR) pipe single socketed, in any length fixed to wall with rubber ring joint, ISI marked complete all as specified.

S&F 75mm bore (any radious) cast iron bends diminishing pieces or tapers complete all as specified.

S&F 75mm bore (any radious) cast iron bends diminishing pieces or tapers with oval access door complete all as specified.

S&F100mm bore (any radious) cast iron bends diminishing pieces or tapers complete all as specified.

S&F100mm bore (any radious) cast iron bends diminishing pieces or tapers with oval access door complete all as specified.

S&F 110mm bore (any radious) PVC (SWR) bend, ISI marked complete all as specified.

S&F 75mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S&F 100mm cast iron branch pieces,double (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S&F stack clamps for 75mm bore pipeout of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F stack clamps for 100mm bore pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F of mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

S&F of mild steel sliding door bolt plate type 200 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

S&F of 150 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified.

S&F of aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified .

S&F of aluminum handles cast type, anodised, 150mm size complete all as specified .

S&F for mild steel cold rolled butt hinges medium weight 100 mm long fixed to pressed steel door frame if required all as specified.

S&F for mild steel cold rolled butt hinges medium weight 75 mm long , including fixing to pressed steel door frame.cupboard & Almirah if required all as specified.

Supply only PD proof 101 LW (+) of Dr Fixit or equivalent.

Supply only super latex 302 of Dr fixit or equivalent.

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n. exc 1.5 m in depth; for foundation n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm in soft/loose soil.

Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point.

M&L for cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete

M & L PCC 1: 3: 6 type C2 as in in fdn filling and mass concrete using 40 mm graded crushed stone agg stone C-2 complete all as specified and directed.

…..do……. all as per item No 6 above but surface channel 1:2: 4 type B-1 using 20 mm graded stone agg complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall in cement mortar 1:4 coplete all as specified and directed.

M&L Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (area of the sub structure in contact with backfill to bemeasured) complete all as specified and directed.

M&L Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L Treating the soil under plinth protection at the rate of 5 liters of emulsion per square metre of surface area complete all as specified and directed.

M&L Treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per metre of the perimeter wall complete all as specified and directed.

M&L three coats of white wash on newly plastered surfaces of wall including preparation, complete all as specified and directed.

M&L for preparation of new plaster surfaces and applying two coat of cement base paint over alkali resistence primer on wall complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface.

M&L for 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in levelling course, complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and directed.

M&L synthetic enamel paint on newly steel surfaces two coats including primer and preparation, complete all as specified and directed.

S&F Rolled mild steel Framed work ~Fe-290 - (Gde-E-165) such as grills,gratings,etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, framework of water tanks and similiar works complete all as specifed and directed.

S&F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F aluminium handle cast type anodized 150mm, complete all as specified and directed.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed.

S&F aluminium anodized barrel tower bolts of extruded section of length 150mm and fixed with cadymium plated wood series, complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt 300mm with hasp staple, complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall, coiling or laid in floors of , complete all as specified and directed.

M&L for cutting chasses for concealed water tubing of 15mm dia and making good, complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall, ceiling or laid in floors of , complete all as specified and directed.

S&F vitreous china squattting pan, 'Orissa' pattern, size 580 x 440 mm, white, with "P" or "S" trap, with integral foot rests excluding flushing cistern but including connection to trap, anti syphonage pipe etc. complete all as specified and directed.

S & F 32 mm dia Flush pipe of polyethylene of low or high density of PVC for low level cistern etc complete all as specified and directed.

S&F PVC connection 15mm dia 450mm long with brass coupling/unions on both ends suitable for flushing cistern and WHB, complete all as specified and directed.

S & F fancy type, chromium plated, long body, bib taps, 15mm bore with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule and fixed complete all specified and directed.

S&F angle valve cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.

S&F vitreous china wash hand basin with stand white flat back of size 550x400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia, brass chromium plated waste fittings etc complete all as directed and spcified.

S&F PVC water tanks 500 ltr cap rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part Icomplete all as directed and spcified.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.

M&L RCC Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete uing type M-25(Design mix) (using 20mm graded) stone aggregate complete all as specified.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.

M&L RCC in Columns, pillars, piers, posts and struts using type M-25(Design mix) (using 20mm graded) stone aggregate complete all as specified.

Form work to soffits of suspended slab such as roof slabs, floor slabs and similar work; n. exc 200mm thick(horizontal or sloping) all as specified and directed by Engr in Charge.

Form work to edges of concrete flats, floor and roofs n. exc 20 cm wide horizontal or sloping and similar work exc 10cm but n exc 20cm wide

M&L RCC slab supported on walls , beams & colmns etc as in roof & the like using M-25(Design mix) using 20mm stone aggregate complete all as specified.

M&L RCC in beams, Cantilivers, bressummers, lintels over 1.5 mtr span using type M-25(Design mix) (using 20mm graded) stone aggregate

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches complete all as specified.

S&F in PVC (SWR) bends any radius bore 75 mm.

M&L PVC (SWR) 75mm floor trap with grating including jointing to waste pipe fixed in solvent cement complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches complete all as specified.

S&F PVC 75mm (SWR) junction single(single T) equal or unequal with access door complete as specified.

S&F PVC 110mm (SWR) junction single(single T) equal or unequal with access door complete as specified.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified.

S&F 110mm PVC (SWR) vent cowl complete as specified

S&F vitreous china urinal, half stall type, white (back wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe

Supply & Fix 32mm dia PVC waste pipe for WHB and Urinal with union complete all as specified and directed.

S&F CP soap dish fixed to wall with suitable rawl plug all as specified and directed in Engr in Charge

S & F 20 mm dia brass CP towel rail 600mm all as specified and directed by Engr in Charge (Cat. No. 7781)

S & F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms)

S& F 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipeand fixed. (Minimum weight 15mm-142gms/2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm- 690 gms) ®

M&L for preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethane modified acrylic roofing system, co elastic technology (CET) based on modified polyurethane and fully fibre reinforced, having Sun Reflectivity index (SR) of 109 on top of concrete roof surfaces. All cracks up to 3 mm at corner joints, channel and parapets should be treated with crack seal. Applying three coats including one coat of primer of ShaliUrethane BTD/ Sikalastic 560/ smart care damp proof-ultra having coverage @ min 0.75kg/m2 and dilution up to 10% and laying reinforced fiber net and applying two coats (without dilution) of shaliUrethane BTD/Sikalastic 560/smart care damp proof ultra @ total consumption 2 kg/m2 in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%. The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant (Note :6 Hrs interval between two coat will be maintained). All auxiliary and accessories involved during application should be supplied by single manufacturer as a part of system. Note:- Application of water proofing treatment will be done by Authorised Applicator only. (i) The water proofing treatment shall be carried out by the manufacturer or their authorized applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However, contractor may deposit the FDR of same amount in favour of GE. If contractor fail to rectify the defect pointed out during this period in writing, the defect shall be got rectified at contractor' risk and cost and the payment shall be made from the amount kept reserved or by encashing the FDR deposited by the contractor as guarantee. The contractor's quoted rates for this item shall deemed to be inclusive of this aspect.

M&L 20mm Gun metal globe of gate valve with iron wheel head, screwed both ends of size complete all as specified.

S&F 15 mm dia, pillar taps, fancy type cast copper alloy capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' long screwed shanks and fly nuts, screwed for iron pipe complete all as specified.

S&F shower rose fancy type bass chromium plated 125 mm heavy duty pattern with swivel joints type screwed for 15mm bore including jointing to pipe or unions complete all as specifed and directed.

M & L salt glazed stone ware drain pipe laid and tested in trenches as specified 150 mm dia bore.

Providing, precast cement concrete Type B1 1:2:4 (20 mm graded aggregate Set in Cement Mortar 1:4 in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.

M & L Cutting into existing manholes for connecting new drains/pipes of dia 150 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base all as specified and as directed by Engineer-in-Charge.

M & L for machine pressed precast concrete interlocking payer block any shape and size confirming to IS -15658-2006 of 60 mm thickness (M-35 Grade) with grey cement and no pigment all as specified and directed by Engr-In-Charge.

Demolition and breaking up old broken 150mm drains pipe (SWG), AC or RCC incl accessories set in cement mortar and removing rubbish from site as directed Engineer-in-Charge complete all as specified and as directed.

M&L PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for150 mm bore pipes all as specified and as directed.

M&L Reinforced concrete drain pipevclass NP2 laid and pointed comlete with coller in trenches and jointed as specified for 150 bore pipes all as specified and as directed (Note :Excavation and earth work measured and paid separately)

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and as directed.

M&L RCC nominal mix 1:2:4 using 20mm graded stone aggregates as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves complete all as specified.

Demolition of cement concrete (unreinforced) at any position any description not other wise specifically provided for complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in benching of man holes, rounded or chamfered on edges including all necessary form work complete all as specified.

M&L rendering 10mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth using extra cement mixed with integral water proofing compound @ 3% by weight of cement or as per manufacturer's instruction all as specified and as directed (Note : WPC shall be measured and paid separately).

Extra for forming fair finished drain of channel 30cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc

Add or deduct for each 25 mm girth or part thereof over or under 30cm ,

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc for taking credit including making good the disturbed surfaces to match with the existing complete

Taking down old unsv DB/SPN/Loadline DB complete

Material & labour for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and modular metal flush box, modular white cover plate with frame, blanking plate etc suitable for up to required module etc complete and making good to the disturbed surfaces to match the existing complete all as specified and directed for for One light / bell point controlled by one, one way switch 06 Amps

All as per item No 181 here-in-before but for one light point controlled by two way switches

All as per above item No.181 here-in-before but one Ceiling / exhaust fan point controlled by one, one way switch 5/6 Amps

All as per above item No. 181 here-in-before but one 3 pin, 5/6 Amps socket outlet point on same board controlled by one, one way 06 Amps switch

All as per above item No.181 here-in-before but with point wiring 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sqmm single core FRLS cable for one 3 pin,15/16 Amps socket outlet point on independent board controlled by one, one way 15/16 Amps switch

One socket outlet 5 amps controlled by one switch on independent board

S&F switch piano flush type, 06 Amps, single pole, one way, 230 volts complete

S&F switch piano type 2 way 5/6 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge.

S&F bell push, flush type, 06 Amps, 230 volts with switch frame complete

S&F switch piano flush type, 16 Amps, single pole, one way, 230 volts with switch frame complete

S&F socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 230 volts with socket frame complete

S&F socket outlet 2 in 1, 3 pin, 06 Amps and 3 pin, 16 Amps, flush type, 230 volts with socket frame complete

S&F ding dong bell/Buzzer, AC, 230 volts, single pole complete

S&F ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, humfree, AC, 230 volts, 100 watts complete

S&F ceiling rose, 6 Amps, 230 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete

Supply and fix lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting including 9W LED bulb complete.

S&F decorative wall mounting light SS finish fixture with extruded glass difuser suitable for up to 40 watt mini glass lamp, lamp holder, including 9 Watts LED bulb having minimum efficiacy at level >=120lumens/watt, life of fixture not less than 50K Hrs, Ripple<5%, UGR<19, Minimum surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95, THD<10%@ operating voltage 170V-240V for fixing in decorative wall mounting light and all accessories pre-wired including connecting up including taking down of existing u/s light fitting complete

S&F in repair wall mounted LED batten with aluminium housing and initigrated electronic drive 18/20 watt fixture 4 feet provided for efficient heat dissipation with polycorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete

S&F in repair surface and wall mounted LED batten 10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive, pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete

S&F energy saving LED security light fittings of 45 watt with pressure die cast aluminium IP66 luminaire with high power LED As light source comprising with electric driver and all accessories prewired incld connecting up with PVC insulated copper conductor cable 1.5 sqmm ,3 core for connections and including suitable GI bracket for mounting of light fittings,bend to light fittings,bend to shape at required degree and fixed to wall by means of suitable flat iron clamp ,nut boltsand washers etc.complete all as specified and directed.

Supply and fixing of exhaust fan, steel body, AC, single phase, 230 V of size 300mm sweep with blades, frame & louver having 1400 RPM speed, 1600 CMH and including making of holes of suitable size and taking down old exhaust fan and depositing to MES store yard making good to the disturbed surfaces to match the existing complete all as specified and as directed.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose complete . and taking down old/unsv fan and deposit in E/M store yard complete all as specified and directed

M&L for sub main wiring with 10 Sqmm nominal cross sectional area, Three single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 10 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring complete

M&L for sub main wiring with 6 Sqmm nominal cross sectional area, Three single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed, including taking down old sub main wiring complete

All as per item No. 216 herein before but with 4 sqmm and 4.00 sqmm as earth wire

S&F sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 'C' curve, 240 Volt complete

Supply and fix electric water heater, storage type 25 ltrs capacity, BEE star rated, vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adapter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode having adustable knobe for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure having heating element 2 KW and minium two year warranty on product, minimum three years on heating element complete all as specified and as directed (Note : Old/ unsvGeysers to be deposited in MES store)

S&F MCB DB 12 Way, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs and making fully covered entry of cable by good quality PVC conduit up to 2 mtr making good to the disturbed surface and DB should be fixed on wooden frame in alignment clamp properly as per requirement on site complete all as specified and directed by Engineer in charge.

S&F (in replacement) sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 415 volts, 04 ways with 200 Amps rated copper bus bar and metal double door suitable for MCCB 125 amps as incomer and MCB SP as outgoing along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete (Note :- MCCB & MCB SP will be measured seperately)

S&F MCCB 125 amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line/ VTPN DB & connection complete

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning by using suitable copper lugs complete:-

(a) SP 5 To 32 AMP

(b) SPN/DP 40 to 63 AMP

M&L for LED Flood Light of 150 Watt with luminaire, energy saving & enviornmental friendly, long life diecast aluminium, IP65, with high power LED as light source incl necessary fixing arrangement with clamps of suitable size and connection using suitable copper wire PVC insulated complete all as specified and directed by Engineer in charge.

M&L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete.(Note: On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.)

S&F energy saving LED security light fittings of 30 watt with pressure die cast aluminium IP66 luminaire with high power LED As light source comprising with electric driver and all accessories prewired incld connecting up with PVC insulated copper conductor cable 1.5 sqmm ,3 core for connections and including suitable GI bracket for mounting of light fittings,bend to light fittings,bend to shape at required degree and fixed to wall by means of suitable flat iron clamp ,nut boltsand washers etc.complete all as specified and directed.

M&L for LED Flood Light of 150 Watt with luminaire, energy saving & enviornmental friendly, long life diecast aluminium, IP65, with high power LED as light source incl necessary fixing arrangement with clamps of suitable size and connection using suitable copper wire PVC insulated complete all as specified and directed by Engineer in charge.

Supply and laying or fixing or passing through pipe in repair of 1100V grade, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of size 16 sqmm 2 core nominal cross section complete

Sub class ‘B bricks, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and as directed

Sand cushioning to underground cable with a layer of sand 8 cm before lying the cable and 15 cm after laying the cable 10 cm punned thickness above the top of upper most cable total 18 cm complete all as specified and directed.

Shri Balaji Construction

Adhunik Builders

imran construction company

M/s Verma and Co

GIAN ENGINEERS

V M CONSTRUCTION

POONAM ENTERPRISES