Reconstruction of Public Toilet at kondies colony in ward No.97, South Zone, Coimbatore Corporation.

Amount

Jungle cleaning at the site as per the instructions of deparmental officers etc., Completed.

Dismantling the Existing Damaged Reinforcement cement Concrete in cement mortar walls under 3 mtr height including Labour and Conveyance Charges Etc.,

Dismantling the Existing Damaged Brick or stone in cement mortar walls under 3 mtr height including Labour and Conveyance Charges Etc.,

Earthwork excavation for foundation in all types of soils and sub soils including soft disintegrated rock and soft rock to the full depth as may be directed except in hard rock requiring blasting, including necessary string, strutting shuttering, bailing or pumping out sub soils water, removal of slush wherever necessary and also including refilling th sides of foundatiion with excavated soil in layers of 15 c.m thick, well rammed and consolidated depositing the surplus earth within the compound in places shown by the departmental officers with all leads and lifts and clearing and leveling the site etc., complete complying with the standard specifications, drawings and as directed by departmental Engineers.

Sand filling for foundation with clear Well gravel sand including cost of sand watering, ramming and consolidation etc complete as directed by departmental officers.

Cement concrete in 1:4:8 (one cement, Four sand and Eight aggregates) mix using 40mm hard broken granite metal for foundation and flooring including dewatering where ever necessary and laid in layers of not exceeding 15 cm thick to required thick to required thickness , including cost and conveyance of materials to work site labour charges complete with standard specifications

Supplying, fabricating and placing in position HSD steel rods for reinforcement including the cost of steel and binding wire etc. complete and as directed by departmental officers

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. Sl.No.122

Supply and erecting centering for sides and soffits including supports and strutting upto 3.29m high for plane surfaces such as RCC slabs, Rectangular beems, Tee (or) ECC Beam, Lintel, Bed Block, Staircase waist and landing slabs landing beams, canopy etc., in all floor with all cross bracings using mild steel sheets of size 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25mm X 25 X 3mm for boarding laid over country wood joinsts of size 10cm X 6.50cm spaced at about 90cm C/C and supports by Causrina props of 10cm to 13cm dia spaced at 75cm C/C etc., completed as directed. Sl.No.123

Reinforced cement concrete 1:1.5:3vmix(One cement One and Half sand and Three aggregates) mix for all reinfoced cement concrete works using 20 mm ISS gauge hard broken grainte machine crushed metal including cost and conveyance of all materials at site including all labour charges for concrete mixing, laying, watering, curing properly but excluding cost of steel and centering etc., complete complying with standard specifications.

Brick work in CM 1:5 (One cement and Five sand) mix using uniformly well burnt country bricks of size 23 x 11 x 5 cm including cost and conveyance of all materials to site and all other labour charges and incidental charges etc., complete for foundation and basement complying with standard specification. (Masonsry projection wherever for obtaining the required elevation shall be done without extra cost) as per standard specification.

Supplying and fixing of steel ventilators, door, window, grill gate using25 mm x 25 mm x 3mm L angle side frame with cross bars and G.I.Sheet 1.60mm thick including all labour and materials complete complying with standard specifications and drawings and as directed by the departmental Engineers.

Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter.

Supply of RCC precast slab 100mm thick in C.C. 1:2:4 mix using 20m baby jelly including water curing, moulding charges etc., complete.

Plastering with CM 1:5 (One cement and five sand) mix 12 mm thick including finishing cost and conveyance of all materials to work site and all labour charges watering, curing and and all other incidental charges etc., complete complying with standard specifications.

Weathering course in concrete broken stone brick jelly 20mm size in pure slacked lime over RCC slab. The proporation being 32:12:5 for requuired slope and the thickness of as required and well beaten with wooden beaters etc., completed - 10 m3

Terrace flooring with one couse of pressed tiles of size 23 X 23 in cement mortar 1:3 mix with impermo oil 2% by weight of cement and pointed with same oiled mortar

Plastering with CM 1:3 (One cement and three sand) mix 20mm thick including finishing cost and conveyance of all materials to work site and all labour charges watering, curing and and all other incidental charges etc., complete complying with standard specifications.

Daddoing the walls with first quality approved colour glazed tiles with printed design of 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2

Cement concrete in 1:2:4 (one cement,Two sand and Four aggregates) mix using 20mm hard broken granite metal for foundation and flooring including dewatering where ever necessary and laid in layers of not exceeding 15 cm thick to required thick to required thickness , including cost and conveyance of materials to work site labour charges complete with standard specifications

Supply of Five Hundred ltr. Capacity PVC Water Tank including cost and conveyance of complete complying with standard specifications and drawings and as directed by the departmental Engineers

Supplying and fixing in position best white glazed earthenware Oriya type INDIAN WATER CLOSET of approved Quality of size 584mm width "P" or "S" trap and embedding the closet with trap to shape in position with 40mm brickjely concrete 1:2:5 (One lime, two sand and five brickjelly) and finishing the top to the required slope and including giving connection to the C.I soil stracks by dismantling the masonry floor or RCC works and redoing the same to the original condition withour anyleakage etc., complete as directed by the departmental officers. (The water closet should be got approved by the Executive engineer before use on work)

Physically Challenged European Water Closet (Colour) with 'P' or 'S' Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings

1a.Supplying and fixing of position of Indian make white glazed earthwere wash basin 550mm x 400mm with all accessories such as cost Iron brackets, 32mm dia C.P. Waste coupling, Rubber plug and chain, 32mm dia 'B' class, G.I. Waste pipe, 15mm dia, G.M.Wheel valve, 15mm dia Nylon connection, 15mm dia Brass Nipples, 15mm C.P. pillar tap etc.,

Supplying and fixing in position C.I. Man HOLE COVER (light or heavy duty) of 60x60 cm of best approved quality confirming to L.S.S.etc.,complete complying with standard specifications and drawings and as directed by the departmental Engineers

Wiring with 2x1.5sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade insuitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A FT switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for light point / fan point (for electronic regulator) SD-2

Supply and fixing of WT bulk head fitting with guard (Philips/Bajaj/crompton/K.likw ) suitable for in candles cent lamp with 60 W Bulb ( SD 82 )

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessorie swith 150x100x113mm TW switch box for 5A3 pin noninter locking Wall socket with 5A flush types witch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point SD - 10

Supplying and fixing of 4 ft.40 W tube light flu fitting complete with copper choke and condenser with TW round blow on wall and ceiling with PVC unsheated lead from terminal tube fitting. (SD 89).

Service Main supply and run of 2 of 6 sqmm polythene insulated and PVC sheathed ( Heavy Duty) wire for service connection mains.

Supplying and Painting the wall with two coats of cement paint over one coat of cement primer as instructed by the departmental officers including preparation of surfaces curing etc., complete.

Painting new iron work such as new iron bars/MS grills/ Weld mesh and ventilators etc., with two coats of approved paint over a coat of primer already given including all by specifications and as directed by the departmental Engineers at all locations and height and complying with standard specifications including cost and conveyance of paint and labour charges.

Drilling of 150mm dia. Bore well in Hard Rock area anywhere in Coimbatore Municipal Corporation limit including transportation to the work site including labour charges for insertion of casing pipes.

Supply of 180mm dia OD PVC casing pipe 6kg/cm2 suitable wall thickness including erection.

Supply and delivery of 7.5 HP borewell submersible pumpset with vertical type with all accessories with latest FS 8034 in general for the following duty conditions the pumpset should have diagonally balanced bronze impler and stainless shaft for motor and pump and directly coupled to a suitable capacity continuous rated three phase fifty cycles 22/440 volts AC supply motor should be as per ISI with upto date amendment. The starter winding should be made from high conductivity PVC insulated 3 core flat copper cable of suitable size of work Duty 50 LPM x 225 M head.,18 Stage and Supply and delivery of power coated MV panel incorporating switches and one on air break automatic star delta (FASD) Starter (have condenser ) Suitable for the above motor with suitable ammeter, voltmeter, single phasing cum dry running preventor, point lamps pneumatic timber suitable for 240V – 440V Providing termination @ TNEB Meter to MV panel board as per IE rules and as directed by Corporation officers.

Supply of 4 mm2 3 core Copper, PVC insulated flat cable.

Labour for the erection of submersible pumpsets in borewell including fixing and jointing submersible cable with proper claps upto the starter to the required depth and also fixing of riser pipes to the required depth values erection clamps, pressure gauges upto exterior wall of the pump room and erection of panel board consisting of TPICN, Switches starter, Voltmeter, Ammeter 3 pilot (including lamps) capacitor, single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules including construction of earth pits with earthing materials as per rules etc. complete testing pumpsets on trial run 30 days and as directed by Corporation officers.

Earth work with refilling

Supply and delivery of the following materials approved brand as per list with ISI marking and an approved by Corporation Officers.

50mm GI pipe "B" Class ISI

50mm GI Bore Coupling

50mm GI Coupling

50mm GI Bend

50mm GI Elbow

50mm NRV Valve

50mm dia GM Gate Valve

50mm dia MS Bore Clamp

MS borewell cover

50mm dia Hex Nipple

50mm dia Flange set

Supply of Shellac Bottle

Supply of PVC Pipes and Specials

63mm dia PVC pipe of 6kg/cm2

63mm dia PVC Elbow

63mm dia PVC Tee

63mm dia PVC Coupling

63x20mm dia PVC Saddle

63 mm dia PVCEndcap

63mm dia PVC FTA

20 mm GI Pipe 'B' Class

20mm C.I.Tap

20mm GI Coupling

20mm GI Elbow

20mm dia Hex Nipple

m. 110 mm dia PVC pipe of 6kg/cm2

n.110 mm dia PVC Elbow

o.110 mm dia PVC Tee

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Laying and Jointing of PVC pipe for distribution line.