REPAIR/MAINT TO SECURITY WALLS,FENCING,STEEL GATE INCLUDING AREA DRAINAGE,HARD STANDING,PATH ETC AT OLD SF,RRC OTM AREA, MD ACCN ASC AND TA BN AT FATEHGARH CANTT

Amount

Dismantiling of floor, hearth or wall tiling including cement mortar bedding (but not baking), removing rubbish off the premises etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, posts embedded in natural ground or enclosed with Concrete, brick work, ground masonry, etc.complete all as specified and directed.

Excavating post holes in soft/Loose soils (or similar holes ) n exc 0.50 Cum each and getting out and returning filling in balance portion (after PCC filling Ref note given below) with boulder and mixed with earth in layers exceeding 25 Cm thick, rammed, watering and removing surplus soils to a distance exc 100 M but n exc 250 Mtr and deposited where directed . Note (i)The PCC 'for fxing post shall be measured and paid sepeartely under appropriate item of Sch À. Every tenth post and corner post shall be embeded in PCC as directed by Eng-in-charge. (ii) The cost of boulder and earth filling for fixing poles shall deemed to be included in quoted unit rate by the contractor.

M&L for RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in precast RCC fencing post /struts of average sectional area n exc 100 Sqcm with or without chamferred angles and flats ,splayed ,rounded as directed and shown on drg including necessary form work complete all as specified & directed.

M&L glazed ceramic coloured tiles (450mmx250mmx 7 mm/450mmX350mmX7mm) thick as in vertical surfaces set and jointed in neat cement slurry and jointed or coloured cement to match etc complete laid over screed bed or bedding layer of mortar cement mortor (1:6) and including 15mm thick ,complete all as specified and directed.

M&L 20-25 mm th machine cut kota stone slab as in flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, with and including over 20 mm thick screed or bedding layer in cement mortar (1:4) all as specified and directed.

M&L Coloured Chequered cement concrete tiles (25cm x 25cm x 25mm) thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in paving/path etc with and including over 20 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc; half round or other stock section, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts and similar work conforming to Fe-290 Gde E-165 with & including preparation of surfaces & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 Cm long but not exceeding 16 to 20mm dia of neck complete all as specified and directed.

Supply & fixing chain link fencing made out of mild steel galvanised wire of 4 mm dia GI wire having mesh size 50mmx50mm of pattern & design with & including S &F 8 mm dia round bars on top, middle & bottom ( Three continous rows) to uphold the chain link fencing & tying with binding wire all as specified and directed.

Dismantling of barbed wire fencing of any description and in any position complete all as specified and directed.

S&F for GI barbed wire 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm barbs at 75 mm spacing and shall confirming to IS-278-2001 & IS-280-2006 and straining and fixing to any type of standrad rails with & including necessary straining bolts including securing or tying at crosssing with and provision of Galvanized mild steel wire ,staples or steel pins etc as directed. Make : Tata or equivalant as approved by the GE . Note (i) The entire quantity brought by the contractor shall be got approved from GE before fixing. (ii) The weight of barbed wire shall be between 97 to 106 Kg per KM . (iii) Rates quoted by the contractor includes the cost of necessary straining/adjustment nut bolts

Taking down cement plaster on brick work or concrete surfaces including racking out joints etc complete all as specified and directed.

M&L Rendering 15mm thick on Brick / Concrete Surfaces in CM (1:4) finished even & smooth without using extra cement complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6m mean radious built in cement mortor (1:6) etc complete all as specified and directed.

-ditto- all as per above but except bricks-ditto--

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan of any radious ( less than 1/2 Brick ) built in cement mortor (1:4) etc complete all as specified and directed.

Dismantling of brick laid dry ( laid flat or on edge ) or brick tiles in floor,channel,kerb,approns etc complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan of any radious laid on edge ( less than 1/2 Brick ) built in cement mortor (1:4) etc complete all as specified and directed.

….ditto…as above but except bricks..ditto…

M&L for 35 mm thcik Providing precast cement concrete louvres and jallies, 25mm thick (mea sured solid), including all mould- ings but excluding frame in cement concrete type B-0 (1:2:4) and set in cement mortor (1:4) complete all as specified and directed.

M&L for Providing precast cement concrete in posts to RCC jali, with with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match in cement conrete type B-O,(1:2:4) and set in cement mortor (1:4) complete all as specified and directed.

M&L for precast reinf cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate ) as in cover slabs of septic tank/soakage well slab and manholes including form work etc and engrooving on cover MES/19-20 marking in 5mm wide , 10mm depth and 75mm high letters on each cover to the pattern and design as directed while concrete is greeen , and cover jointed and set in CM( 1:4) complete all as specified and directed.

M&L for TMT bars 10 mm dia and over, cut to length bent to shape required, including cranking and bending spirally for hooping ends, binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all specified and directed.

S&F in repair expanded metal weight not less than 4 kg/sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members

Removing of silt / soi filled in drains, including disposal of soil to distance of 50m complete all specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends complete all as specified and directed.

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

Demolition of RCC work of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for two coats of cement base painting over a coat of primer on newly plastered surfaces of wall incl preparation of surfaces complete all as specified and directed. Note: Subssequent coat shall be applied as directed by Eng-in-charge after the approval of coat.

M&L for prepration of newly or previous untreated steel surface over 10cm width or girth and applying two coats of syntheic enamel paint etc complete all as specified and directed. Note: Subssequent coat shall be applied as directed by Eng-in-charge after the approval of coat.

M&L PCC type B-2 (1:2:4) (40mm stone graded aggregate), boundry pillars and posts (including, caps and based )complete all as specified and directed.

M&L for 100mm thick cement concrete (1:2:4) type B-1 using ( 20mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement and spike rolling to surface or making impressions of expanded metal,while the concrete is green complete all as specified.

M&L PCC type B-2 (1:2:4) (40mm stone graded aggregate), 75mm thick as in Plinth Protection finished even and smooth etc without using extra cement and laid in alternate bays complete all as specified and directed.

M&Lfor forming expansion joint filled with performed bitumenous filler top 30mm primed and sealed with sealing compound grade 'A' complete all as specified and directed.

M&L cement concrete type D-2, (1:4:8) ( using 40mm stone aggregate ) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for sand filling under floor including watering and consolidation in layers n.exc 25 cm complete all as specified and directed

Machine pressed precast concrete interlocking paver block vibrator finish any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with gery cement and pigment , over 20 mm thick sand filling complete all as specified and directed.

M&L cement concrete type C-1 (1:3:6) ( using 20mm stone aggregate ) as in bed surface drain complete all as specified and directed.

Machine pressed precast concrete interlocking paver block vibrator finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with gery cement and pigment , over 20 mm thick sand filling complete all as specified and directed.

M&L cement concrete type B-1 (1:2:4) ( using 20mm stone aggregate ) as in bencing, coping,rounded or chamfered on edges etc complete all specified and directed.

M&L flush pointing to old brick of flat surface in cement mortor including taking down complete all as specified and directed.

p k enterprises