8823 Repair to hard standing path fencing boundary walls and certain misc works at DGQA residential complex at Ghatkopar and office complex at Vikhroli under GE North Mumbai

Amount

Demolition of cement concrete in ground floors and pavings, n.exc. 15cm thickness (below or above ground level) and removal of debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Demolition of brick work/stone/PCC block masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

Dismantling barbed wire fencing, any type, size & thickness complete all as specified and as directed by Engineer-in-Charge.

M & L Plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor / paving, 40mm thick, finishing the surface even and smooth without using extra cement including spike rolling to surfaces or making impression of expanded metal whilst concrete is green complete all as specified and as directed by Engineer-in-Charge

M & L for forming 12mm thick expansion joints, filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound Gde ‘A’, thickness of concrete slab 150mm complete all as specified and as directed by Engineer-in-Charge.

M & L for Plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in coping, bed plates, bond stones including necessary form work for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge.

M & L for 150mm thick PCC (1:4:8) type D2, (using 40mm graded stone aggregate) as in sub base for hard standing, finished even and fair complete all as specified and as directed by Engineer-in-Charge.

S & F galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provn of galvanized mild steel wire staples or steel pins etc as directed (each line of wire to be measured), complete all as specified and as directed by Engineer-in-Charge.

M & L for Rolled mild steel sections as in joist, channel, angle, or tee sections, without connecting plates, etc to form frame complete all as specified and conforming to Fe - 410 W (Grade E-250) 'A' quality complete all as specified and as directed by Engineer-in-Charge.

M & L for preparing of new steel surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, tint as approved with all necessary staging, scaffolding, etc as required complete all as specified and directed by the Engineer- in - Charge. Make: Asian (Apcolite) / Berger (Luxol) / Nerolac

M&L machine pressed precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade set and jointed with grey cement and pigment to match in floor etc complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur

M&L for sand filling under floors or in foundations including watering and consolidation etc complete all as specified and as directed by the Engineer-in-charge

M & L Pre-cast cement concrete block masonry 1:3:6 type C1, (using 20mm graded stone aggregate), with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M & L for rendering 10 mm thick in CM 1:4 on concrete / brick masonry surfaces and finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M & L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed by Engineer-in-Charge. Make: Super Snowcem/Durocem/Aquacem/Shalimar/Berger

M & L for 100mm thick Plain Cement Concrete Nominal mix (1:3:6) type C2, (using 40mm graded stone aggregate) as in sub base flooring complete all as specified and as directed by Engineer-in-Charge.

M/S Kumar Enterprises

joshua construction

M/s Qureshi Construction Co

Vijay Enterprises