Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.1 LAccepted-Finance | ₹31.1 L | L1 | Accepted-Finance Accepted |
| 2 | L2₹31.8 LAccepted-Finance | ₹31.8 L | L2 | Accepted-Finance Accepted |
Tender Value
₹32.5 L
EMD Value
₹64,928
Closing Date
27 Apr 2026, 3:15 pmClosed
Executive Engineer MD-II
Office of the Executive Engineer Mechanical Division II IFC Department GNCTD E wing Ground Floor Vikas Bhawan II Civil Lines Delhi 110054
Modification of Gates by increasing the height of existing Gate, P/F of Wheel Assembly i/c Repairing of existing Grooves and Painting etc. of Regulators at RME 180 and Ali Drain under jurisdiction of CD X.
2026_IFC_290168_1
EE/MD-II/ASW/06/2026-27
Open Tender
Miscellaneous Works
25 days
Office of the Executive Engineer Mechanical Divisi
Please refer Tender documents.
9 documents required · 9 mandatory
₹0
₹64,928
29 Apr 2026
21 Apr 2026
27 Apr 2026
21 Apr 2026
27 Apr 2026
21 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Fabrication, Erection and Commissioning of Gate for increasing the height of gate by M.S plate of size 2.465 mtr. width and 1.00 mtr. height of 10 mm Thickness, End plate, Back plate, Stiffener etc. of required size as per specification and direction of Engineer-in-charge. (RME 180 Regulator) | 1 | Job | 5,74,611 | ₹5,74,611 |
| 2 | Fabrication, Erection and Commissioning of Gate for increasing the height of gate by M.S plate of size 2.465 mtr. width and 1.00 mtr. height of 10 mm Thickness, End plate, Back plate, Stiffener etc. of required size as per specification and direction of Engineer-in-charge. (Ali Drain Regulator) | 1 | Job | 5,74,611 | ₹5,74,611 |
| 3 | Extension of Groove at RME 180 by 1 meter both sides by shuttering, centering including steel reinforcement for RCC work including straightening bending and placing in position with cold twisted bar & laying ready mixed or site batched design mixed of M25 Grade with minimum cement content of 300 Kg. per cum as required at site. | 1 | Job | 1,15,640 | ₹1,15,640 |
| 4 | Extension of Groove at Ali Drain by 1 meter both sides & shuttering, centering including steel reinforcement for RCC work including straightening bending and placing in position with cold twisted bar & laying ready mixed or site batched design mixed of M25 Grade with minimum cement content of 300 Kg. per cum of raising total height up to 2 meters as required at site. | 1 | Job | 1,32,160 | ₹1,32,160 |
| 5 | Providing and fitting of Wire rope 12 mm ( 17 Meter + 17 Meter for both gates) | 34 | Mtr | 2,950 | ₹1,00,300 |
| 6 | Fabrication, Erection , Commissioning and Fixing of Bottom Sill Beam of length 9.14Mtr. made out of ISMB-250 including cutting, grinding, welding & fixing in bottom portion with concrete work after dismantling the old Sill Beam etc. complete as per specification & to the entire satisfaction of Engineer-in-charge. (RME 180 & Ali Drain Regulator). | 2 | Job | 1,61,990 | ₹3,23,980 |
| 7 | Construction, maintenance and subsequent removal of earthen bundies including cost of excavation earth filling of E.C. bags with earth, stitching and placing in position for care and diversion of all kinds of water entering or flowing in the drain and pumping out surface as well as underground seepage water to keep the construction area completely dry for execution of entire work including its execution of work in or under water and or liquid mud wherever required with round the clock watch & ward/maintenance of earthen bundies to keep the working area/site dry complete as per specification & direction of Engineer-in-charge. (RME 180 & Ali Drain Regulator). | 2 | Job | 2,53,404 | ₹5,06,808 |
| 8 | Fabrication, Erection and Commissioning of Wheel assembly of size 250 mm Dia. x 60 mm wide complete in respect as per design, drawing, specification and directions of the Engineer-in-charge.(RME 180 & Ali Drain Regulator) | 4 | job | 29,028 | ₹1,16,112 |
| 9 | Repairing of rope drum , Hoist machine alignment including greasing, oiling and servicing of reduction gear complete as required at site. | 2 | Jobs | 1,12,100 | ₹2,24,200 |
| 10 | Repairing of Existing Grooves on both sides of Regulators by providing of M.S Plate, T-plate, S.S. Plate etc. including cutting, grinding, welding and fixing etc. complete as per specification and to the entire satisfaction of the Engineer-in-charge.(RME 180 and Ali Drain Regulator) | 2 | Job | 1,23,900 | ₹2,47,800 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.46 MB
BOQ_385203.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid