Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 CrAccepted-AOC 14 CHAHAR CONSTRUCTION CO ADARSH NAGAR NEAR ROHILLA COMMUNICATION 124103 | JHAJJAR | HARYANA | 124103 | ₹18.8 Cr Quoted ₹19.4 Cr | L1 | Accepted-AOC L1 |
| 2 | L2₹19.7 CrRejected-AOC DHANI CHANDPUR BAWAL ROAD REWARI DHANI CHANDPUR BAWAL ROAD REWARI 123401 | REWARI | REWARI | HARYANA | 123401 | ₹19.7 Cr | L2 | Rejected-AOC L2 |
| 3 | L3₹20.1 CrRejected-AOC 1804 SECTOR 2 ROHTAK 124001 | ROHTAK | HARYANA | 124001 | ₹20.1 Cr | L3 | Rejected-AOC L3 |
| 4 | L4₹20.1 CrRejected-AOC 858 SECTOR 23 127021 | BHIWANI | HARYANA | 127021 | ₹20.1 Cr | L4 | Rejected-AOC L4 |
| 5 | Rejected-Technical MITTAL FARM LOHARU ROAD CHARKHI DADRI 127306 | CHARKI DADRI | HARYANA | 127306 | - | - | Rejected-Technical Rejected |
Tender Value
₹16.4 Cr
EMD Value
₹32.7 L
Closing Date
5 Jul 2024, 10:00 amClosed
RAVINDER
Bawal PHED
Providing canal based water supply scheme group of 5 no villages and construction of additional Storage and Sedimentation Tank at existing Water Works
2024_HRY_377939_1
2024DDC33FCF 3AD5 48CA 8450 69D48A34D642580PUH
Open Tender
Civil Works
730 days
ASARA KA MAJRA BALAWAS BHARANGI CHIRAHARA HARC
Providing canal based water supply scheme group of 5 no villages and construction of additional Storage and Sedimentation Tank at existing Water Works
2 documents required · 2 mandatory
₹20,000
₹32.7 L
Yes
7 Jan 2025
13 Jun 2024
5 Jul 2024
13 Jun 2024
5 Jul 2024
13 Jun 2024
13 Jun 2024 - 5 Jul 2024
Amount
Providing Fixing Led light of 50watt (Syska, Havells, Philips make)
Providing Fixing Led light of 9watt (Syska, Havells, Philips make)
wall fan of size Sweep 40 cm (400 mm) Speed 1280 rpm Power Input 55 W
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length fixed on existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart with 5 horizontal R.B.T. reinforced barbed wire, studtied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.)
Supply erection testing and commissioning of Flow Meter (KROHNE Make) with digital display at desired place in Pump Chamber of 100 to 400 mm i/d complete in all respect.
Providing and fixing pressure guage 6` dia 0-24 kg/sqcm as per site required complet in all respect
`AUTOMETIC POWER FACTOR CONTROL PANEL Supply erection testing and commissioning of Automatic Power Factor control panel at 90 KVAR capacitor complete with digital screen as per specification mentioned in the as per approved DNIT. ` For Water Works Kamalpur
Supply and erection of LT copper armound cable for 100volts fitted in cable tray complet in all respect as per approved NIT (3 core x 50 sqm)
Provision for Repair/ shifting of existing utilities i.e. HDPE pipe, Cable, UPVC/ CPVC pipe connections of various consumers complete job
Provision for probe radar survey to check any underground obstruction before finalizing the alignment complete in all respect as per approved
Supply and erction of aluminum armound LT cable for 100volts fitted in cable tray complet in all respect as per approved NIT (Excluding cost of Cable Tary) 3.5corex95sqm
Supply and ere ction of LT copper armound cable for 100volts fitted in cable tray complet in all respect as per approved NIT (Excluding cost of Cable Tary) 3corex25sqm
Providing and fixing sign board of size 2.5mtrx1.5mtr made out of 75x25 mm SS tube 3mm thick with SS grade 304sheet of 3mm painting with synthetic enamle paint and letter writing NABARD pattern complet in all respect n
SUPPLY,ERECTION,TESTING AND COMMISSIONING OF is MARKED 3 CORE COPPER CABLE SOLID COPPER CONDUTOR UP TO 6 SQMM AND BALANCE STANDARD COPPER XLPE INSULATED CORE LAID UP PVC INNER SHEATED ARMOUR gALVANISEDC WIRE FOR CABLE UPTO 10 X 1.5 SQMM 8 X 2.5SQMM 3 X 10 SQMM 4 X 6 SQMM AND BALANCE ALL GALVANISED STEEL STRIP EXTRUDED PVC TYPE ST2 OUTER SHETAED /1100 V GRADE AS PER IS 7098 (PART 1) 1988 WITH UP TO DATDE AMENDENT ALONG WITH ALL ASESSORIES LIKE THIMBLE LUGS ETC FOR MOTOR AS PER ENTIRE SATISFECTION OF eic COMPLETE IN ALL RESPECT MAKE IN INDIA CABLE LTD FINOLEX/GLOSTER/HAVELLS/POLYCABE/RR CABLES/CAPP/GLOSTER/UNIVERSAL/FORT GLOSTER INDUSTRIAL LTD/ASIAN CABLE COPERTARED LTD 50 SQMM 3 CORE
Providing and fixing C.I. sluice valves (with cap) c omplete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately):of make IVC 400 mm diameter Class I
Providing and fixing Cast Iron Detachable Joints marked with IS: 8794 for use with asbestos cement pressure pipes complete with 2 Nos. rubber rings marked with IS:5382 and IS:10292 and appropriate number of nut and bolts marked with 15:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (Excavation will be paid separately) 400 mm i/d
Supply and ere ction of LT copper armound cable for 100volts fitted in cable tray complet in all respect as per approved NIT 3 core x 6sqm
Supply and ere ction of LT copper armound cable for 100volts fitted in cable tray complet in all respect as per approved NIT 3 core x 4sqm
Supply anderction of aluminum armoundLT cable for 100volts fitted in cable tray complet in all respect as per approved NIT 3.5 core x16 sqm
Providing and fixing Vent 150 mm i/d complete as per satisfaction of Engineer in charge
`Supply and insertion of 200 mm i/d M.S. Carriar pipe 6.0 mm thick (Fe-410 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following size including cutting bevelling grindingand radion graphically welding of pipe as per IS 1182complet in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to RDSO as per specification no MandC/PCNIII /88 to a dry film thickness of 250 micron for protection against crossion complet with hydraulic testing in all respect i) For 200 mm i/d M.S. casing pipe 6.0 mm thick.`
Providing and fixing H.D.P.E. spacer at a distance of 2 meters apart to avoid contract of casing pipe and carrier pipe for 200 mm i/d M.S. pipe 350 mm i/d complete in all respect as per approved NIT. 350mm i/d 8mm thick.
Providing concrete block 1:1-1/2:3 on both ends to plug the annular space between casing and carrier pipe for 200 mm i/d casing pipe 350 mm i/d complete in all respect
`Supply and insertion of 350 mm i/d M.S. Casing pipe 6.00 mm thick (Fe-410 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following size including cutting bevelling grindingand radion graphically welding of pipe as per IS 1182 complet in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to RDSO as per specification no MandC/PCNIII /88 to a dry film thickness of 250 micron for protection against crossion complet in all respect i) For 350 mm i/d M.S. casing pipe 6.00 mm thick.`
Providing and fixing C.I. sluice valves (with cap) c omplete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately):of make IVC 500 mm diameter Class I
Providing and fixing Cast Iron Detachable Joints marked with IS: 8794 for use with asbestos cement pressure pipes complete with 2 Nos. rubber rings marked with IS:5382 and IS:10292 and appropriate number of nut and bolts marked with 15:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (Excavation will be paid separately) 500 mm i/d
Boring /excavation including pit making at entry and exit point to the precise dimensions for the Launch of the specialized Auger boring machine in any soil condition complet in all respect i) For M.S. Pipe 700 mm i/d 10.00 mm thick casing pipe.
`Supply and insertion of 700 mm i/d M.S. Casing pipe 10.00 mm thick (Fe-410 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following size including cutting bevelling grindingand radion graphically welding of pipe as per IS 1182complet in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to RDSO as per specification no MandC/PCNIII /88 to a dry film thickness of 250 micron for protection against crossion complet in all respect i) For 700 mm i/d M.S. casing pipe 10.00 mm thick.`
`Supply and insertion of 500 mm i/d M.S. Carriar pipe 8 mm thick (Fe-410 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following size including cutting bevelling grindingand radion graphically welding of pipe as per IS 1182complet in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to RDSO as per specification no MandC/PCNIII /88 to a dry film thickness of 250 micron for protection against crossion complet with hydraulic testing in all respect i) For 500 mm i/d M.S. casing pipe 8.00 mm thick.`
Providing and Fixing HDPE Specer to be fitted in MS casing pipe of size 700 mm i/d and Carrier pipe of size 500 mm i/d complete job including labour charges, cartage of material to site of work complete in all respect as per satisfaction of Engineer-in-Charge.
Providing concrete block 1:1-1/2:3 on both ends to plug the annular space between casing and carrier pipe for 500 mm i/d casing pipe 700 mm i/d complete in all respect as per satisfaction of Engineer-in-Charge.
Boring /excavation including pit making at entry and exit point to the precise dimensions for the Launch of the specialized Auger boring machine in any soil condition complet in all respect i) For M.S. Pipe 350 mm i/d 5.00 mm thick casing pipe.
AUTOMETIC POWER FACTOR CONTROL PANEL Supply erection testing and commissioning of Automatic Power Factor control panel at 90 KVAR capacitor complete with digital screen as per specification mentioned in the as per approved DNIT. For Water Works
Providing and fixing HT GO switch specification as per HVPN with earthing of approved make complete in all respect.
Providing and fixing C.I. sluice valves (with cap) c omplete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately):of make IVC 600 mm diameter Class I
Providing and fixing Cast Iron Detachable Joints marked with IS: 8794 for use with asbestos cement pressure pipes complete with 2 Nos. rubber rings marked with IS:5382 and IS:10292 and appropriate number of nut and bolts marked with 15:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (Excavation will be paid separately) 600 mm i/d
Providing concrete block 1:1-1/2:3 on both ends to plug the annular space between casing and carrier pipe for 250 mm i/d casing pipe 400 mm i/d complete in all respect new
Providing and fixing H.D.P.E. spacer at a distance of 2 meters apart to avoid contract of casing pipe and carrier pipe for 250 mm i/d M.S. pipe 400 mm i/d complete in all respect as per approved NIT. 400mm i/d 6.00 mm thick.
`Supply and insertion of 250 mm i/d M.S. Carriar pipe 5.0 mm thick (Fe-410 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following size including cutting bevelling grindingand radion graphically welding of pipe as per IS 1182complet in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to RDSO as per specification no MandC/PCNIII /88 to a dry film thickness of 250 micron for protection against crossion complet with hydraulic testing in all respect i) For 250 mm i/d M.S. casing pipe 5.0 mm thick.`
Boring /excavation including pit making at entry and exit point to the precise dimensions for the Launch of the specialized Auger boring machine in any soil condition complet in all respect i) For M.S. Pipe 400 mm i/d 6.00 mm thick casing pipe. n
`Supply and insertion of 400 mm i/d M.S. Casing pipe 6.00 mm thick (Fe-410 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following size including cutting bevelling grindingand radion graphically welding of pipe as per IS 1182 complet in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to RDSO as per specification no MandC/PCNIII /88 to a dry film thickness of 250 micron for protection against crossion complet in all respect i) For 400 mm i/d M.S. casing pipe 6.00 mm thick` n
Supply and erection of Mix Flow Submersible Pumping Set of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II complete in all respects. Make Kirlosker /MATHER plus PLATE/AQUA:- 7000LPM x 160 BHP x 60.00 mtr head
`Supply, erection, testing and commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm and 400 mm deep having follwing items. a) MCCB 100 amp. 1 No. (LandT Siemens, ABB) b) CT 100/3 = 3Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 2 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta = 7000LPM x160.00BHP x 60.00 mtr Head (LandT Siemens, ABB) = 2 Nos. f) Capacitor KVAR as per site requirement = 1 No. g) Indicating Lamp = One Set h) Change over switch of suitable Amp = 1 No. (Each)`
Supply and ere ction of LT copper armound cable for 100volts fitted in cable tray complet in all respect as per approved NIT ( 3.0 core x 95 sqm )
Supply and erction of aluminum armound HT cable for 100volts fitted in cable tray complete in all respect as per approved NIT 3.00 core x 95sqm
Supply and Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame 2100 LPM x 50 BHP x 65 mtr head (Clear Water)
Boring /excavation including pit making at entry and exit point to the precise dimensions for the Launch of the specialized Auger boring machine in any soil condition complete in all respect i) For M.S. Pipe 300 mm i/d 5.00 mm thick casing pipe.
Supply and insertion of 300 mm i/d M.S. Casing pipe 5.00 mm thick (Fe-410 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following size including cutting beveling grinding and radion graphically welding of pipe as per IS 1182 complete in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to RDSO as per specification no MandC/PCNIII /88 to a dry film thickness of 250 micron for protection against crossing complete in all respect i) For 300 mm i/d M.S. casing pipe 5.00 mm thick.
Supply and insertion of 150 mm i/d M.S. Carrier pipe 4.0 mm thick (Fe-410 grade) fabricated as per IS: 3589 of 1991 from steel plates conforming to IS 2062 of following size including cutting beveling grinding and radion graphically welding of pipe as per IS 1182complet in all respect and also coating of inner and outer surface of casing pipe with high built epoxy paint to RDSO as per specification no MandC/PCNIII /88 to a dry film thickness of 250 micron for protection against crossing complete with hydraulic testing in all respect i) For 150 mm i/d M.S. Carrier pipe 5.0 mm thick.
Providing and fixing H.D.P.E. spacer at a distance of 2 meters apart to avoid contract of casing pipe and carrier pipe for 150 mm i/d M.S. pipe 300 mm i/d complete in all respect as per approved NIT. 300mm i/d 5.00 mm thick.
Providing concrete block 1:1-1/2:3 on both ends to plug the annular space between casing and carrier pipe for 150 mm i/d casing pipe 300 mm i/d complete in all respect.
Supply , Erection testing and commissioning of Open well Submersible pumping sets as per IS specification no 14220 - 1994 (as amended time to time up to date for pumps ) and 9283-1994 (as amended up to date for motors ) for clear water ( 400 LPM x 7.50 BHP x 45 mtr Head )
Supply , Erection testing and commissioning of Open well Submersible pumping sets as per IS specification no 14220 - 1994 (as amended time to time up to date for pumps ) and 9283-1994 (as amended up to date for motors ) for clear water ( 1100 LPM x 20.00 BHP x 45 mtr Head (CW))
Desinging , Testing , Commissioning of automated PLC controlled SCADA based water purification plant of 3.50 MLD capacity at Water Works , all other installation etc. comprising of DI pipe from raw water main/pump, inlet box of WTP and to CWT to C.W. suction well, inlet channel, Alum dozing, Flash mixing, Clari floculator, filter box, over head Reservoir for back wash including pump sets and electric control panel, waste water tank including pump sets and electric control panel, DI pipes, DI specials, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of floe measurement and sand bed with automation complete in all respects as per NIT (Sluice valve of make IVC/ VAG ).
Supplying, erection, testing and commissioning of horizontal motor pumping set for Raw water having head 15.00 m as per the indicated requirements of discharge in LPM and power capacity in BHP as per IS marked. 2800 LPM x 17.50 BHP x 15 mtr Head (Raw Water)
Supply Indoor Type 11KV VCB Control Cubical Panel with vertical Isolation Type Breaker as per Relevant IS as amended up to Date and Additional Specifications, having Capacities as Mentioned Below, Single break trip free mechanism, manually charged and Auto/Manually closing breaker suitable for use on 11kv, 3 phase 50hz AC, Supply with short circuit fault level of 500 Amps Capacity, breaker featured with local ON/OFF indicator with hand trip device, spring release coil, shunt trip coil and auxiliary switch of 2NO plus 2NC and equipped with following switchgears and accessories including making suitable structure arrangement for installation, control wiring and connections etc. as reqd. (1 IC plus 2 OG) a). VCB, 11KV, 500Amp, 50KA. b). 1ph 11KV/110 Volts PT (indoor type) Class 0.2 Accuracy and 100 VA burden -3 no’s. c). 33KV indoor dead type dual core dual ratio 3CTs of ratio 200-100/5-5 A of 15 VA burden, PS 5 P10 and accuracy class 0.2. d). Control panel- Cubicle type control panel suitable for floor mounting made out of 1.63 mm CR sheet duly powder coated and with following relays. e). Microprocessor based numerical relay for O/L, E/F and SC Protection suitable for above. f). Master trip relay -2 no’s. g). Indicator type Annunciator panel with buzzer. h). Digital Volt Meter- 0-11 KV. i). Digital Amp Meter- 0-100 Amp. j). RYB/ Trip/Closing/Spring charged indicator lamp. k). Fault Annunciator panel for O/L, WTI, OTI and Buchhloz Relay Alarm And Trip Auxiliary relay. l) TNC Switch for Operation. m)Multifunction Meter EM6400NG. n)TCS Relay for Safety..
Credit of old pumping machinery 2 no VBS (sanjarpur and rudh) 7.5 BHP
Operation and maintenance for the complete scope of work mention in the DNIT (Disinfection material supplied by the PHED) as per Schedule-IV for a period of 5 years after 12 months during defect liability period and 3 months trial run period (will be charged to the A/ Mtc. Estimate) Operation and maintenance during defect liability period (Operation only)
Operation and Maintenance during 1st year after defect liability period year
Operation and Maintenance during 2nd year
Operation and Maintenance during 3rd year
Operation and Maintenance during 4th year
Operation and Maintenance during 5th year
Bidder Name
Amount
Chahar Construction Co (GSTN-06AAMFC2979A1ZI) BID ID -1107661
Narender Singh Contractor (GSTN-06AXBPS0272N1Z8) BID ID -1108671
M/S SHREE BALAJI BUILDERS(GSTN-NA)--1108666
Rakesh Yadav Contractor(GSTN-NA)--1104949
Chahar Construction Co
Rakesh Yadav Contractor
M/S SHREE BALAJI BUILDERS
Rakesh Yadav Contractor
M/S SHREE BALAJI BUILDERS
Narender Singh Contractor
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid