Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 CrAccepted-Finance 184 187 TEMPLESTEPS BLOCK ANNASALAI LITTLEMOUNT CHENNAI CHENNAI TAMIL NADU 600015 | CHENNAI | TAMIL NADU | 600015 | ₹1.6 Cr | L1 | Accepted-Finance 1st lowest bidder |
| 2 | L2₹2.2 Cr+₹61.6 L (38.5%)Rejected-Finance SCHINDLER HOUSE MAIN STREET HIRANANDANI GARDENS POWAI MUMBAI 400076 MAHARASHTRA INDIA | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400076 | ₹2.2 Cr+₹61.6 L (38.5%) | L2 | Rejected-Finance 2nd lowest bidder |
Tender Value
Refer Docs
EMD Value
₹3.5 L
Closing Date
9 Nov 2022, 4:30 pmClosed
Superintending Engineer, SWEC, PWD
OFFICE OF THE SUPERINTENDING ENGINEER (P.W.D) South-Western Electrical Circle PWD Compound, Midnapore, Paschim Medinipur
Construction of Integrated District Court Complex at Jhargram within Jhargram Court Compound in the District of Jhargram --- SITC of Passenger lift
2022_WBPWD_409303_1
WBPWD/SE/SWEC/NIQ08/2022-23
Open Tender
ELECTRICAL WORKS ORG
Item Rate
120 days
JHARGRAM
Please refer Tender documents.
3 documents required · 3 mandatory
₹3.5 L
O/O of SE, SWEC,PWD, PWD Compound, Midnapur
11 Jan 2023
24 Sept 2022
11 Nov 2022
24 Sept 2022
9 Nov 2022
28 Sept 2022
27 Sept 2022
Amount
SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd.[Judge's Lift --1 no ; Fire Lift -1 no ]
Make : OTIS / KONE/SCHINDLER
Type: Passenger Lift .
Load : 10 Passenger / 680 Kg
Control: Microprocessor based with AC variable voltage & variable frequency ( VVVF)
Machine:- Energy efficient machine, Gearless, with Machine Room
Position of Machine Room: YES [above the hoistway]
Speed:1.5 Mtrs./ Sec
Floor served: G+5
Landing: 6, all on same side
Total Rise : 25.2 Mtr (Approx) (Bidder should visit the site)
Operation: Microprocessor based simplex full collective with or without attendant.
Signals: Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator.
Leveling accuracy:±5 mm(Micro levelling arrangement)
Car inside :1300 mm ( W ) x 1350 mm ( D ) or As per manufacturer's standard conforming to IS
Car Entrance : Clear Opening 800 mm (W) x 2000 mm/2100 mm (H ) protected with car door
Car Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail.
Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan
Car Ventilation: Pressure fan with anodised aluminium grill.
Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order).
Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system
Landing Door: Stainless steel centre opening automatic door provided with V3F controlled door drive system
Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor
PROTECTIVE DEVICES & OTHER ACESSORIES
ARD: Automatic rescue device complete with dry maintenance free batteries as required, for automatic evacuation to the nearest floor in case of power failure / single phasing/others.
Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio display indication
Emergency lighting in car: Battery operated emergency lighting in the lift car.
Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room
Emergency Alarm: Battery operated alarm bell system in lift car and control room
Fireman switch:Fireman switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main rope - Belt Type
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension: 2000(W) mmX 1700(D)mm
Pit Depth : 1600 mm (Bidder should visit the site)
Overhead : 4800 mm (Bidder should visit the site)
Electric power supply: AC 415 Volt, 3phase, 50 Hz, terminated in machine room as per IS
SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd. [Strecher's Lift Work- 1 no]
Make : OTIS / KONE/SCHINDLER
Type: Passenger Lift (Strecher's Lift)
Load : 15 Passenger / 1020 Kg with 1 strecher
Control: Microprocessor based with AC variable voltage & variable frequency ( VVVF)
Machine:- Energy efficient machine, Gearless, with Machine Room
Position of Machine Room: YES [above the hoistway]
Speed:1 Mtrs./ Sec
Floor served: G+5
Landing: 6, all on same side
Total Rise : 25.2 Mtr (Approx) (Bidder should visit the site)
Operation: Microprocessor based simplex full collective with or without attendant.
Signals: Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator.
Leveling accuracy:±5 mm(Micro levelling arrangement)
Car inside :1000 mm ( W ) x 2400 mm ( D ) or As per manufacturer's standard conforming to IS
Car Entrance : Clear Opening 900 mm (W) x 2000 mm (H ) protected with car door
Car Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail.
Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan
Car Ventilation: Pressure fan with anodised aluminium grill.
Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order).
Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system
Landing Door: Stainless steel centre opening automatic door provided with V3F controlled door drive system
Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor
PROTECTIVE DEVICES & OTHER ACESSORIES
ARD: Automatic rescue device complete with dry maintenance free batteries as required, for automatic evacuation to the nearest floor in case of power failure / single phasing/others.
Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio display indication
Emergency lighting in car: Battery operated emergency lighting in the lift car.
Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room
Emergency Alarm: Battery operated alarm bell system in lift car and control room
Fireman switch:Fireman switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main rope - Belt Type
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension: 1800(W) mmX 3000 (D)mm
Pit Depth : 1600 mm (Bidder should visit the site)
Overhead : 4800 mm (Bidder should visit the site)
Electric power supply: AC 415 Volt, 3phase, 50 Hz, terminated in machine room as per IS
SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd [Public Lift work - 4 nos].
Make : OTIS / KONE/SCHINDLER
Type: Passenger Lift .
Load : 13 Passenger / 884Kg
Control: Microprocessor based with AC variable voltage & variable frequency ( VVVF)
Machine:- Energy efficient machine, Gearless, with Machine Room
Position of Machine Room: YES [above the hoistway]
Speed:1 Mtrs./ Sec
Floor served: G+5
Landing: 6, all on same side
Total Rise : 25.2 Mtr (Approx) (Bidder should visit the site)
Operation: Microprocessor based simplex full collective with or without attendant.
Signals: Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator.
Leveling accuracy:±5 mm(Micro levelling arrangement)
Car inside :1100 mm ( W ) x 2000 mm ( D ) or As per manufacturer's standard conforming to IS
Car Entrance : Clear Opening 800 mm (W) x 2000 mm (H) protected with car door
Car Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail.
Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan
Car Ventilation: Pressure fan with anodised aluminium grill.
Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order).
Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system
Landing Door: Stainless steel centre opening automatic door provided with V3F controlled door drive system
Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor
PROTECTIVE DEVICES & OTHER ACESSORIES
ARD: Automatic rescue device complete with dry maintenance free batteries as required, for automatic evacuation to the nearest floor in case of power failure / single phasing/others.
Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio display indication
Emergency lighting in car: Battery operated emergency lighting in the lift car.
Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room
Emergency Alarm: Battery operated alarm bell system in lift car and control room
Fireman switch:Fireman switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main rope - Belt Type
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension: 1850(W) mmX 2350(D)mm
Pit Depth : 1350 mm (Bidder should visit the site)
Overhead : 4200 mm (Bidder should visit the site)
Electric power supply: AC 415 Volt, 3phase, 50 Hz, terminated in machine room as per IS
SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd [ADJ OTR Lift -3 nos]
Make : OTIS / KONE/SCHINDLER
Type: Passenger Lift .
Load : 10 Passenger / 680 Kg
Control: Microprocessor based with AC variable voltage & variable frequency ( VVVF)
Machine:- Energy efficient machine, Gearless, with Machine Room
Position of Machine Room: YES [above the hoistway]
Speed:1 Mtrs./ Sec
Floor served: G+3
Landing: 4, all on same side
Total Rise : 16.8 Mtr (Approx) (Bidder should visit the site)
Operation: Microprocessor based simplex full collective with or without attendant.
Signals: Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator.
Leveling accuracy:±5 mm(Micro levelling arrangement)
Car inside :1300 mm ( W ) x 1350 mm ( D ) or As per manufacturer's standard conforming to IS
Car Entrance : Clear Opening 800 mm (W) x 2000 mm (H) protected with car door
Car Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail.
Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan
Car Ventilation: Pressure fan with anodised aluminium grill.
Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order).
Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system
Landing Door: Stainless steel centre opening automatic door provided with V3F controlled door drive system
Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor
PROTECTIVE DEVICES & OTHER ACESSORIES
ARD: Automatic rescue device complete with dry maintenance free batteries as required, for automatic evacuation to the nearest floor in case of power failure / single phasing/others.
Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio display indication
Emergency lighting in car: Battery operated emergency lighting in the lift car.
Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room
Emergency Alarm: Battery operated alarm bell system in lift car and control room
Fireman switch:Fireman switch at main landing terminal.
Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.
Main rope - Belt Type
DIMENSION OF SHAFT & POWER SUPPLY
Available Shaft Dimension: 1850(W) mmX 1700(D)mm
Pit Depth : 1350 mm (Bidder should visit the site)
Overhead : 4200 mm (Bidder should visit the site)
Electric power supply: AC 415 Volt, 3phase, 50 Hz, terminated in machine room as per IS
N.B. i) The rate quoted by the manufacturer should be inclusive of cost for providing 2 years DLP after completion of 1 year of initial commisioning
ii) Rates should be quoted with minor civil works, wall cutting and mending good the damages to the original finish.
SCHINDLER INDIA PRIVATE LIMITED
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .