Providing Alu Anodised Partition Table Chair Steel Beuro and Electrical Arrangements at First Floor Corporation Office Building at Thoothukudi City Muncipal Corporation

Amount

Supplying and fixing in position of Alu. Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90 cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12 mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass with necessary glassing clips.rubber beading, etc., including necessary dismantling holes in RCC columns, beams masonry wherever necessary with power power drill ti the extent required and made good to the original conditions after fixing as directed by the departmental officers. All the Aluminium sections should be anodised to 1.5microns as per ISI specification 1868/1962.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.

Painting two coats with ready mixed interior Plastic Emulsion Paint approved quality and colour , including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Supply and delivery of OFFICE CHAIR with Low back chair with arms and plastic outer cover, Primary Material– Castors, Chair base, Gas lifter, chair arm, Press wood sheet, Plastic outer cover, Style – Modern, Finish – Fabric etc., complete

Supplying and fixing of Office room Table to site, by using of MDF (Medium Density Fiber) panel sheets system fittings and keyboard section with the over all table size of 2.20m x 1.10m with Height = 0.77m to site with required trays and Draws at both sides, the cost including of material charges, making charges and labour etc., complete.

Supplying and fixing steel beuro with Locker ,Dimensions W x H x D (cm): 90 x 195 x 50.7 / Primary Material: Mild Steel / Delivery Condition :Knock Down / Free Assembly Provided Sleek Design:The furniture with which you furnish your home reflects your style and sensibilities.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated unsheathed SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil)

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conducto of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point

Supplying and fixing of 18W 4 Feet LED Fitting with LED etc, complete as per standard specification.

Supplying and fixing of WALL MOUNTING FAN 450mm Sweep , complete as per standard specification.

Supply anf Fixing of Vertical Blinds(Ordinary) including all cost and conveyance etc Completed.,