15th Finance Scheme 2025-26 (2nd Allotment)

Amount

Charges for conducting geophysical survey to locate the favourate point for drilling etc complete including cost of all ttools and plants and all labour charges etc complete

Drilling Of 41/2" dia deep vertical bore well in hard rock area in any Required depth as decided by the departmental officer including inserting the easing pipe etc complete as per standard specifications

Supply and delivery of 150mm OD PVC casing pipe (CM) including cost of all painting work and all labours etc complete

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Brick work in following Cement Mortar using best quality ground mould chamber burnt bricks of size 9" x 4 3/8" x 2 3/4" with class designation of 7.5 conforming to IS 1077-1992 for foundation and basement including Cost of Mortar Plasticizer curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally, other type of bond shall be done as directed by the Executive Engineer in charge

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting two coats with ready mixed Plastic Emulsion Paint S.I.358 Plastic emulison paint of'approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required including cost and conveyance of all materials and all labour charges etc.complete as per Standard specification and as directed by the departmental officers. TNBP No:66-A (Sl.No.358)

Supply and delivery and fixing of 1000 Litres capasity HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrange

Supply and delivery of clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 SINGLE PHASE SUBMERSIBLE PUMPSET AS PER IS 8034/2002 WITH PANEL BOARD

Lettering and writing of scheme details on the side wall frame with cover

Supply and delivery of following pipes and specials including cost and all conveyance charges etc complete

40 mm UPVC Column pipe

40 mm GI pipe B class

32 mm GM gate valve

40 mm flange set

40 mm GI coupling

40 mm GI elbow

32mm GI pipe B class

25 mm GI pipe B class

32mm GI Elbow

25 mm GI Elbow

32mm GI coupling

25 mm GI coupling

20mm GI pipe

20mm waste not Tap

32x25 GI Reducer

25x20 GI Reducer

20mm GI Elbow

4Sq mm 3 core Flat submersible cable

32 mm MS Bore clamp

Wiring with 2x1.5 sq.mm p v c insulated SC.Cu. Conductor of 1100V grade in suiotable p v c rigd pipe on wall and ceiling with p v c accessories with TW switch box in flush painting of suitable colour for open p v c light point (SD-17)

Supply and run of 4 of 6sq.mm pvc insulated SC unsheethed Cu.Conductor of 1100V in suitable pvc rigid pipe on wall and ceililing with continuous earth wire of 14 swg TC wire painting of suitable wire etc complete (SD-52)

Supply and run of 4 of 6sq.mm pvc insulated SC unsheethed Cu.Conductor of 1100V in suitable pvc rigid pipe on wall and ceililing with continuous earth wire of 14 swg TC wire with 32mm GI conduit pipe, painting of suitable wire etc complete (SD-73)

Earthing as per PWD standard with an earth electrode of 2metre class B GI pipe of dia not less than 32mm complete with necessary masonry work (SD-234)

Supply and fixing of TNEB Meter board suitable for 3phase 63A service connection made up of suitable angle iron frame work and supply and fixing of 3nos 63A fuse unit 1no nutral link copper earth flat with inter connection of EB meter to fuse units by 7/16 pvc insulater copper wire with earth connection complete (SD-129)

Labour charges for erection of 1.5 HP submersible pumpset in the borewell including fixing and jointing of submersible cable with proper clamps up to starter to the required depth and also fixing of riser pipe to the required depth valves erection clamps pressur gauge up to the exterior wall of the pump room and erection of panel board consists of TPICN switch,ammeter voltmeter three pilot lamps capacitor single phasing preventer water level guard and laying and jointing of cable and TWIN earthing as per IE Rules etc complete and testing the pumpset and trair run for 10 days etc complete

M SURESH (BID ID -1475843)