Renovation Work of Old Painted Road from Km 0.000 to 1.406 Ohan Bundh No. 1 at Ohan Dam. Lot-6

Amount

Water Bound Macadam Grade III: Providing, laying, spreading and compacting stone aggregates of specific sizes (Grading-III 53 mm to 22.4 mm Specified Size) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.

Prime Coat : Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical specification

Tack Coat:- Providing and applying tack coat with Bitumen VG-10 using pressure distributor at the rate of 0.35 kg/sqm on the prepared bituminous surface cleaned with Hydrolic broom as per Technical specification clause 503.

20mm thick open grade premix carpet using Bituminous (Penetration grade/ modified bitumen) binder:- Providing and laying and rolling of open graded premixed carpet of 20mm thick compacted composed of 13.2mm and 11.2mm aggregate using bitumen VG-10 @ 14.6 kg/ 10sqm to required line, grade & level to serve as wearing coat on a previously prepared base, including mixing in a suitable mixall plant, laying and rolling with a three wheel 80/100 KN static roller capacity finished to required level and grade including all material, labour, T&P hire & fuel charge of mixall and roller etc.(as per MORD Data book clause 5.90(508)

Seal coat :-Providing and laying seal coat type-C with 6.7mm stone chippings @ 0.009cum/sqm precoated with bitumen VG-10 @0.65kg/sqm in suitable mixall plant and rolling with a three wheel 80/100KN static roller to seal the void in a bitumen surface laid to the specified level, grade and cross fall as per technical specification clause and also includeing all materials, labour, T&P, hire & fuel charges of mixall and roller etc. (as per MORD data book cluase 5.12(510)

Painting lines, Dashes, Arrows, etc. on Road in Two Coats on New Work: Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and technical specification clause 1702.

Brick edging on both sides of road with M-150 class bricks (Size 23.5 x 11.5 x 7.5) cm on edge 3” wide and 4-1/2” (11.5 cm) deep laid with mud mortar, finished to the required temples in proper alignment & also dressing ramming the excavated eart and directed by Engineer-in-charge.

Earth work in mar, kabar, ranker and kanker mixed soils in filling or in embankment including lead upto 195M and lift upto 1.5M including dressing ,makuing profile and manual compection but exluding mechanical compection. SOR No 4.09

M/S AJAY SINGH CONTRACTOR

RAJ NARAYAN TRIPATHI

M/S VIVEK KUMAR SINGH

VIVEK KUMAR SINGH