Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.0 LAccepted-AOC 205 IIND PHASE INDUSTRIAL AREA BARMER 344001 | BARMER | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC AOC | |
| 2 | L2₹47.0 L+₹17,068 (0.36%)Rejected-Finance V PO RAIKO KI DHANI NAWAJI KA PANA BHURTIYA DISTT BARMER RAJ PIN 344001 | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹51.4 L+₹4.6 L (9.74%)Rejected-Finance 2 EVEREST VIHAR PT T N MISHRA MARG NIRMAN NAGAR JAIPUR 302019 | JAIPUR | RAJASTHAN | 302019 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹55.2 L+₹8.3 L (17.8%)Rejected-Finance UTARLAI KAWAS BARMER RAJASTHAN 344 001 | BARMER | RAJASTHAN | 344001 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹55.2 L+₹8.3 L (17.8%)Rejected-Finance 12 53 CHOPASNI HOUSING BOARD JODHPUR 342 008 RAJ | JODHPUR | JODHPUR | RAJASTHAN | 342008 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Utarlai
GE (AF) Utarlai PB No. 11 Barmer 344001
REPAIR/ MAINTENANCE TO CERTAIN BLDG OF SMC, AIRMEN MESS , SNCO MESS, BILLETS (SINGLE LVG ACCN FOR AIRMEN, SARGENT, JWO ETC) IN DOMESTIC AREA UNDER GE AF UTARLAI
2022_MES_539233_1
8313/06/E8 dt 19 Jul 2022
Open Tender
Civil Works
Item Rate
180 days
Utarlai
As per NIT
7 documents required · 7 mandatory
₹500
GE (AF) Utarlai
₹90,000
Yes
10 Dec 2022
19 Jul 2022
24 Aug 2022
20 Jul 2022
17 Aug 2022
2 Aug 2022
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified.
M&L for "light shade" vitrified ceramic tiles 10mm thick (square / rectangular) polished area of each tile not exceeding 0.36sqm, infloors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles laid over and including 15mm thick screed CM (1:4) complete all as spd.
M&L for light shade vitrified ceramic tiles 10mm thick (square / rectangular) polished area of each tile not exceeding 0.36sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles laid over and including 10mm thickplaster in CM 1:4 complete all as spd and directed.
S&F non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, laid over and including 15mm thick screed CM(1:4) , set and jointed in neat cement slurry and pointed with white or coloured cement to match shade of tiles complete all as specified.
ditto all as per item No 4 above but on vertical surfaces over and incl 10mm thick cement plaster in CM 1:4 complete all as specified.
S&F glazed ceramic coloured tiles in vertical surfaces size 350x 250x 7mm/ 450X 350X 7mm thick , laid over & including 15mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white /coloured to match shade of tiles complete all as specified.
S&F glazed ceramic coloured tiles in vertical surfaces size 300x 200x 7mm thick , laid over & including 15mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white /coloured to match shade of tiles complete all as specified.
S&F coloured Non Skid ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exc 0.06 sqm but not exceeding 0.11 sqm in floors , etc set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles laid over and including15mm thick screed in CM (1:4) all as spd.
M&L Machine cut kota stone slab flooring 18-20 mm thick of size 550X550mm laid over and including 15mm thick screed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps , jambs , pillars, window cills , cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marbel dust with admixture of pigment to match with shade of granite all as specified and directed.
M&L for 12mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall ) 12mm thick in cement mortar (1:3)and pointing with white cement (1:2) using marbel dust with admixture of pigment to match with shade of granite complete all as specified.
Dismantling of pre-cast PCC block walling / brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed
M & L for block masonry with solid pre-cast cement concrete blocks made out of cement concrete 1: 3: 6 type C-1, using 20 mm graded crushed stone aggregate, exc. 10 cm in width and setting in cement mortar 1 : 6 complete all as specified and directed
Taking down cement plaster on brick/PCC block or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as directed.
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for 20 mm thick (in two layers 10 mm thick each) rendering in CM 1:4 on fair faces of stone surfaces finished even and smooth without using extra cement complete all as specified and directed. fair and even complete.
M&L for rendering 10mm thick in CM 1:4 as setting coat and 5mm thick in cm (1:4) as finishing coat as on chajja complete all as specified.
M&L for rendering 15mm thick on fair faces of brick work or stone surface surfaces in cm 1:6 finished even and smooth w/o using extra cement complete all as specified.
-Ditto- all as per item No 18 above but in cm 1:4 mix with WPC as per manufacturer's instructions Note:- WPC shall be measured and paid separately
-Ditto- all as per item No 18 above but in CM 1:3 on ceiling but 5mm thick complete all as specified and directed.
M&L two coats of oil bound distemper over a coat of primer on walls incl complete removal of existing treatment of old surfaces of walls and applying wall care putty minimum 3mm thick all as spd and directed.
M&L for one coat of oil bound distemper incl preparation of existing surfaces all as spd.
M&L one coat of white wash on plastered/unplastered surfaces of existing ceiling incl preparation of surfaces all as specified.
M&L three coats of white wash on newly plastered surfaces of ceiling incl preparation of surfaces all as specified.
M&L for two coats of cement base paint over a coat of primer incl preparation of new surfaces all as spd.
M&L two coats of oil bound distemper over a coat primer on walls incl preparation new plastered surface of walls and applying wall care putty 3mm thick all as spd and directed.
M&L Preparations of new or previously untreated surfaces of and description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer two wooden surfaces complete all as specified.
M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.
Dsmantlng trellis work (Jafri), ncludng takng as under of battens in trellis (posts and rails measured separately)
M&L for precast cement concrete jallies, 40mm thick in PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates)) & set in cm 1:4 including all moulding but excluding frame.
Demolition of reinforced cement concrete of any descripton & in any position not other wise specifically provided for and removing debris out of MD land as directed by Engineer-in-charge.(reinforcement shall be cut as required to facilitate demolition.) complete all as specified and as directed by Engineer-in-charge.
Form work to chullah hoods, chajjas ,facia, troughs and similar items including edges for flat surfaces Rough surfaces off concerete complete all as specified and as directed
M&L RCC type B1(1:2:4) using 20mm graded aggregate as in chajjas all as directed by Engineer-in-charge.
M&L TMT (steel bars of grade Fe 500 or Fe 550) 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed )not less than 0.9mm dia or securing with clips. NOTE: Reinforcement bars shall be welded to existing reinforcement for casting of RCC member.complete all as specified and as directed by Engineer-in-charge.
Taking down chowkhats or frame n exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified.
Taking down chowkhats or frame exc 1.50 sqm but n. exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified.
Taking down shutters of any description exc 1 sqm but not exc 2 sqm each, resecuring, easing and refixing in the same opening complete all as specified.
S & F 2nd class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as par IS-1003 (Pt-1) kiln seasoned and chemically pressure treated complete all as specified.
S & F factory made 2nd class HW 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass,gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members as specified in SSR part-1, section 8, clause No 8.24(a) complete all as specified.
S&F for factory made steel/wndows (wth sde hung shutters ncludng projectng type hnges wth steel handle and steel peg stay complete wthout glazng bars, dovetaled or welded
S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified
S & F in repar Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified
S&F butt hinges "medium weight" cold rolled mild steel 100mm long.
S&F Aluminium anodised barrel tower bolts of extruded section 100mm long complete all as spd and directed.
S&F 100mm long Aluminium butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as spd and directed.
S&F 300mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all specified
S&F floor door stopper of alumnum alloy body and tongue, anodsed, wth hard drawn steel spring, over all length of cover plate 150mm fixed in floor.
Hacking out old broken glass from metal frame of (any thickness,size,quality or description) incl punching or drilling out old glazing pins/springs clips and with and including S&F for 3mm thick ordinary sheet glass and glazing with oil putty in square nexc 0.5sqm in each pane complete all as specified.
S&F for 3mm thick ordinary sheet glass and glazing with oil putty in square nexc 0.5sqm in each pane complete all as specified.
S&F butt hinges "medium weight" SS 100mm long.
S&F for Aluminium handles, cast type anodised 125mm long for wooden and PVC doors complete all as specified.
S&F for Aluminium anodised barrel tower bolts of extruded section,150mm long all as spd and directed.
S&F 300 long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all specified
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified
S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
Demolition of cement concrete in ground floors and pavings n exc 15cm thickness (below or above ground level) and removing rubbish of out side MD land complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection finished concrete surfaces even and smooth without using extra cement complete as specified.
M&L 50mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate finished even & smooth using extra cement for floor finish all as spd.
M&L 75mm thick PCC type D-2, (1:4:8) using 40mm graded stone aggregate as in sub base complete all as specified and as directed.
M&L 100mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate finished even & smooth without using extra cement. complete all as specified and as directed.
M&L for 25mm thick PCC (1:2:4) type B-0, using (12.5 mm graded stone aggregates) as in base concrete to floors finished even and rough to receve top layer complete all as specified.
M&L for 25 mm thick Sand filling under floors or in foundations including watering and consolidationcomplete all as specified and as directed.
M&L Machine pressed precast concrete interlocking paverblock any shape and size confirming to IS 15658-2006of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and as directed
M&L Chequered cement concrete tiles 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed
M&L for Pre-cast cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in Kerb stone and setting in cement mortar 1:6, complete all as specified.
M&L for two coats of synthetic enamel paint over primed surface on newly surface of concrete of any description over 10cm girth or width, not otherwise described including preparation complete all as specified and directed by engineer-in-charge
S&F in repairs viterious china squatting pan "ORISSA" pattern size 580X440mm white , with integral foot rests, Squa tting pan including onnection to trap, and to flushing pipe, an ti-syphonage pipe ,etc. complete making good to floor complete all as directed by Engr-in-Charge.
S&F in repairs for Viterious China Wash down water closet pan pedestal pattern and trap, including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, incl plastic water closet seat while as per existing size complete all as spd.
S&F 10 litre capacity of PVC valveless, syphonic action type, flushing cistern, low level,white, with inlet, ball valve, float and handle including brackets complete all as spd and directed by Engr-in-Charge.
S&F in repairs wash hand basin of size 550X400mm viterous china 'white' flat back including brackets , waste coupling & PVC waste pipe of 32mm dia all as specified.
S&F in repars vtreous china bowl urinal flat back, size, of 465X355X265mm whte (minimum) wth gratng and union for dscharge pipe, (excludng flushng cistern, flush pipe and waste pipe).
Taking down or up GI tubing 15mm bore and connections incl cleaning for refixing etc.
ditto all as per item No 74 above but 20mm bore.
ditto all as per item No 74 above but 25mm bore.
S&F GI tubing 15mm bore "medium grade" galvanised with all fittings and fixed complete to all and ceiling or laid in floors 15mm bore.
ditto all as per item No 77 but 20mm bore.
ditto all as per item No 77 but 25mm bore.
Refixing old steel tubing and connections in new or old position (wall,ceiling, floor etc) 15mm bore.
ditto all as per item No 80 but 20mm bore.
ditto all as per item No 80 but 25mm bore.
S&F in repairs CP pillar tap fancy type cast copper alloy of 15mm bore , screwed down high pressure for iron pipe.
S&F in repairs 15 mm bore chromium plated , bib taps, cast copper alloy with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule and fixed.
S&F in repairs 15mm bore chromium plated fancy type stop cock cast copper alloy , screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes.
M&L for chipping of slab/column/roof/chajjas/roof projection/balconies/staircase etc as directed and removing loose concrete with chisel hammer without much impact on concrete surface, clean the surface by sand blasting using river sand with min 6kg pressure at the nozzle or air blow by applying CICO clean rust remove or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxy based zinc rich primer/Rust passivation inhibator coat @ 5Sqm/Ltr with CICO Zincilate-500 or equivalent to reinforcement surface as per manufacturers instructions incl all scaffolding, machinery, tools tackles and men materials and cleaning of debris complete all as specified and as directed by Engr-in-charge.Make CICO clean-O-rust, CICO Zincilate-500 or equivalent of Fosrec/Dr fixit/L&T/STP.
M&L for applying bond coat with CICO-latex SBR or equivalent in Fosroc/Dr Fixit/STP/Sika as per manufacturer instructions, after preparing old surface of RCC to receive Polymer modified one component repair mortar or micro concrete. Laying of polymer modified one component repair mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labours, supervision, tools, tackles, transportation, fixing etc complete all as directed. make CICO latex SBR or equivalent in Fosroc/ Dr Fixit/STP. Note:-he Work shall be carried out upto 03 storey building or 12m ht. through authorised applicator or agent.
M&L for preparation the surface and applying 20mm thick in two layer, each layer n.exc. 10mm thick with polymer modified mortar(PMM) on surface of slab/column/roof/chajjas/roof projection/balconies/staircase etc as directed with polymer modified one component repair mortar of PMM Cico Repocem or equivalent in Fosroc/ Dr Fixit/STP. inclusive of all materials, labours, supervision, tools, tackles, transportation, fixing etc complete all as directed. Note:-The Work shall be carried out upto 03 storey building or 12m ht. through authorised applicator or agent. Note for item No 86.00 to 88.00:-The Work shall be carried out upto 03 storey building or 12m ht. through authorised applicator or agent.
M&L 10mm thick cement plaster in CM 1:3 mixed with and incl water proofing compound @ 100ml/50Kg of cement or as per manufacturer instructions of CICO-super or equivalent in Fosroc/ Dr Fixit/STP. Note:-he Work shall be carried out upto 03 storey building or 12m ht. through authorised applicator or agent. Note:- All safety measures shall be taken by the contractor as safety code
S&F for factory made pressed steel frame of size 125X60mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc (thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats/ hold fast complete all as specified and directed.
S&F factory made solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of jambs of wall in CM 1:6 finished even and smooth without using extra cement complete all as specified.
S&F factory made solid panel shutter (PVC) 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail . Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specifications.
S&F in repairs PVC connections 15 mm size with PTMT 45cm long incl brass nut and washers on both ends.
S&F in repairs 15mm bore chromium plated concealed type stop valves cast copper alloy ,screwed down , high pressure with crutch or butterfly handle screwed both ends for iron pipes.
S&F in repairs 20mm bore gun-metal, globe or gate valves, with iron wheel head , screwed both end for iron pipe and fixed.
ditto all as per item No 96 above but 25mm bore.
S&F in repairs brass chromium plated health faucet with necessary arrangements of 15mm bore and fixed complete all as spd and directed by Engr-in-Charge.
S&F Chromium plated cast copper 80mm long shower rose with or without swivel joints , any size , incl fixing to steel pipe or union as in repairs.
M&L PCC 1:3:6 Type C-1 (using 20 mm graded coarse aggregate) finished conceret surface even & smooth without extra cement as in platform below PVC tanks and all as specified and directed.
S&F in repairs Rotational moulded polythylene water storage tank of capacity 500 ltrs ( Cylindrical,verical with closed top) in position including 20mm ball valves high pressure of PTMT (minimum weigth 210 grams) complete all as specified and directed. NOTE: PVC tank shall be of ISI mark and having in two layers.
S&F in repairs Rotational moulded polythylene water storage tank of capacity 1000 ltrs ( Cylindrical,verical with closed top) in position including 20mm ball valves high pressure of PTMT (minimum weigth 210 grams) complete all as specified and directed. NOTE: PVC tank shall be of ISI mark and having in two layers.
Rounding to the edge of stone slabs on edge on cooking platform complete all as specified.
Supply only liquid water proofing compound.
M/s Malinath Electricals
Rasam Engg Co.
M/S Tanisha Traders
M/s godara infratech and power industries
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .