DEVELOPMENT OF LANDSCAPING WORK OF (1 NO. 1900 SFT., 13 NOS. 1300 SFT., 2 NOS. 950 SFT., 6 NOS. 650 SFT., 2 NOS. 550 SFT.) MULTISTORIES HOUSES FOR REVENUE OFFICIALS IN SECTOR-13, BAHADURGARH IN JHAJJAR DISTRICT.

Amount

Hire charges for JCB with bucket capacity of 0.4 cum with fuel and driver for Horticulture work (HSR PM055).

Digging holes in all kind of soil and refilling the same with the excavated earth mixed with well decayed Farmyard manure (cost of manure to be paid separately) (HSR 26.13) Hole 0.75 metre dia and 0.75 metre deep (HSR 26.13.3)

Hole 0.60 metre dia and 0.60 metre deep (HSR 26.13.4)

Hole 0.45 metre dia and 0.45 metre deep (HSR 26.13.5)

Supplying and stacking at site of work well-decayed farm-yard manure from any available source, approved by the Engineer-incharge including screening through sieve of LS.designation 16 mm with 5 km lead. (HSR 26.1)

Supply and Planting rare and specimen tree plants in already prepared pits (Ficus starlight 150 cm height, Terminalia 210 cm height, menatalis, Michelia champaca hybrid ore than 180 cm height, Cyprus (Golden juniperous) more than 180 cm height, topiary of 1 O to 12 no. well trimmed bolls of more than 30cm size of Ficus nuda, Ficus retusa, Ficus long island, Ficus panda more than 180 cm height, Golden bottle brush, casurina equistefolia, Bottle palm with stem circumference at base more than 40 cm,Washingtonia palm of healthy clear stem height below leaf more Thant 90 cm) including, fertilizer and insecticides chlorpyriphos 20 ml per pit, planting of 180cm to 210cm tall sapling in position and flooding with water specie of plant will be decided by engineer in charge. (HSR 26.20) (Labour Work only).

Supplying and planting in prepared pits and watering, healthy, vigorous growing, permanent trees including, application of 10 ml chlorpyriphos 20% EC, planting desired disease free, 200 cm to 220 cm height ,5 cm to 6 cm calliper size stem, full of foliage ornamental tree sapling each to be supplied in 30cm x 30cm poly bag (HSR 26.14) (Labour Work only).

Supply and planting of disease free healthy , vigorous growing more than 75 cm height permanent shrubs in already prepared pits, supplied in 25 cm x 20 cm poly bags , application of 10 ml chlorpyriphos 20% E.C. termiticide each and watering supplied through the tractor tanker. (HSR 26.18) (Labour Work only).

Planting permanent Hedges including digging of trenches, 60 cm sqm wide and 45 cm deep, refilling the excavated earth, mixed with farmyard manure, supplied at the rate of 1.62 cum per 18 sqm, DAP 0.6kg, Chlorpyriphos 20%EC@ 0.20 litre per 18 sqm and supplying and planting hedge at 30 cm apart in two rows @ 202 no. well trimmed bushy, multi-branched, 30 cm to 45 cm in height plants to be supplied in 15 cm x 15 cm poly bags per 18 sqm (HSR 26.34) (Labour Work only).

Supply and planting Ground Cover plants including digging 30 cm deep bed and refilling of beds with excavated soil and FYM 0.0508 cum per sqm, Fertilizer DAP 50 gms and insecticides chlorpyriphos 10ml per sqm, planting of saplings at 23cm distance from plant to plant and row to row, minimum 19 no. plants per sqm (HSR 26.26) (Labour Work only).

Supplying healthy, well branched, well bloomed and Planting rose beds including digging 30 cm deep bed and refilling of beds with excavated soil and FYM 0.0508 cum per sqm, Fertilizer DAP 50 gms and insecticides chlorpyriphos 10ml per sqm , planting of hybrid Budded rose saplings to be supplied in earthen pots 120cm x 20cm polybags , planting of sapling at 45 cm distance from plant to plant and row to row and 5 no. plants per sqm (HSR 26.30) (Labour Work only).

Edging of paths/beds with bricks/tiles laid dry, including required excavation, refilling, consolidating with hand and spreading neatly surplus earth within a lead of 50 meters (HSR 26.55.4) Brick inclined at 60 deg to horizontal.

Supply of 1st quality PVC water pipe 1'' dia winner/rajdoot make. (NS)

Supply of Primco make 18 inch size Power Lawn Mower roller type fitted with Crompton Greaves Electric Motor 1 HP Single Phase with Copper Cable 2.5 Sq. mm One Bundle brand like Havells/RR (90 Mtr. Roll). (NS)

Installation of Submersible Tubewell with 2 HP Motor. (NS) Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, up to 90 metre depth below ground level. (HSR 33.6.1.1) IN ALL TYPE OF SOIL 300 MM DIA

Supplying, assembling, lowering and fixing in vertical position in bore well, Unplasticised PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. (HSR 33.8) 150 mm nominal size dia (HSR 33.8.2)

Supplying, fixing and lowering reducing socket as per IS:226/1975 as amended up to date 277.10mm outer dia, x 219.10mm outer dia with 8 threads per inch or 25.40mm to be made out of M.S. plate with internal threads, suitable for jointing 277.10mmouter dia pipe and outer dia pipe and 219.10 mm outer dia ERW pipe as per item said above. (HSR 20.97)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 40 mm dia nominal bore (HSR 22.88.5)

Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. (HSR 33.15)

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: (HSR 33.16) 150 mm dia (HSR 33.16.2)

Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. (HSR 33.17) 150 mm dia (HSR 33.17.2 )

Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I). (HSR 33.18) 150 mm dia (HSR 33.18.2 )

Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. (HSR 33.19)

Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete inall respect up to the entire satisfaction of Engineer- in-Charge. (HSR 24.5) Submersible Copper Cable 3 Core 4 sqmm (HSR 24.5.1.3)

Providing and fixing gun metal non- return valve of approved quality (screwed end) (HSR 22.99) 50 mm nominal bore (HSR 22.99.4) Horizontal (HSR 22.99.4.1)

Supply and FixingAccessories etc.

Supply and lowering 2 HP ISI Mark Submesible motor with pump of Lubi/KSB/Crompton, etc.

Supply and fixing ISI mark panel board of 2 HP of BCH, Cuttler Hammer, L&T etc.with Lock and Key Lock and Key Steel Box.

Excavating trenches of required width for pipes, cables, etc,including excavation for sockets, depth up to 0.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m (HSR 4.19.1.1) Pipes, cables etc. not exceeding 80 metre mm dia (Derived)

1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded stone aggregate 20 mm nominal size) (HSR 6.1.2)

Providing & fixing of HDPE 63 mm with 6 kg. pressure pipe line in already dig up to trench brand like National/Havells etc. (NS)

Providing & fixing of 63 mm compression joint of self threading PVC/HDPE coupler. (NS)

Providing & fixing of 63 mm self threading compression End cap of PVC/HDPE coupler. (NS)

Providing & fixing of 63 mm self threading compression T of PVC/HDPE coupler. (NS)

Providing & fixing of self threading shadle piece of 3/4'' with screw clamp of ISI make. (NS)

Providing & fixing of ¾” GI Nipple of B-class of 4'' size. (NS)

Providing & fixing of ¾” GI Nipple of B-class of 9'' size. (NS)

Providing & fixing of ¾” GI Nipple of B-class of 12'' size. (NS)

Providing & fixing of ¾” GI Nipple of B-class of 24'' size. (NS)

Providing & fixing of ¾” GI elbow of unique/ISI Mark. (NS)

Providing & fixing of ¾” GI Socket of unique/ISI Mark. (NS)

Providing & fixing of ¾” Brass Ball Valve of Jolota/ISI Mark. (NS)

Maintenance of fine grass lawn for 6 Months including fertilizer application, DAP @ 20gm/sqm, urea 40gm/sqm, watering, weeding, top dressing with good earth and manure mixture 2:1 @ 0.01cum per sqm, maintaining fine level, regular mowing and removal of rubbish with all lifts and leads. (HSR 26.10) (Labour Work only).

Maintenance of Tree for 6 Months the age of tree of 4th, 5th and next years including weeding, heing, plant protection, the watering from Deptt. source, application of 4 ml chlorpyriphos four times, 0.0289 cum FYM each, 50 gm urea twice, replacement of casualty etc. (HSR 26.15.2) (Labour Work only).

Maintenance of Shrub for 6 Months including weeding, hoeing, plant protection, watering from Deptt. source, application of 4 ml chlorpyriphos four times in a year , 0.0289cum FYM each, 20 gm urea and 20 gm DAP twice, replacement of casualty etc. (HSR 26.19.1) (Labour Work only).

Maintaining the hedges for 6 Months including watering, hoeing weeding trimming and shaping ,replacement of casualty as and when noticed, application of Farm yard manure @ 0.0127 m layer over surface, application of insecticide chlorpyriphos @ 2ml per sqm twice , urea @40gm and DAP @10 gm per sqm once in a year. (HSR 26.35) (Labour Work only).

Maintenance of ground cover plants for 6 Months including application of FYM 0.0508 cum , insecticide 10ml, fertilizer 20 gm, per sqm, replacement of casualty with same specie of plant and all horticultural practices. (HSR 26.27) (Labour Work only).

Maintenance of Rose beds for 6 Months including application of FYM 0.0289 cum, DAP 100gm ,insecticide chlorpyriphos 20% EC 10 ml, Fungicide Blitox/bavistin 20gm per sqm replacement of dead plants with same specie/quality of plant. (HSR 26.31) (Labour Work only).

The Yadav Cooperative LandC Society Ltd. Sohna