REPAIR TO BOUNDARY WALL, CHAIN LING FENCING AND OTHER MISC WORK UNDER AGE B/R-I AT GE BABINA CANTT

Amount

Dismantling of posts or struts (wood, steel or RCC) any section including taking out embeded portion and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh and ms iron fencing post any type complete all as specified and as directed.

Dismantling structural steel work of any description complete all as specified and as directed.

M & L for surface dressing nexc 15 cm deep , site clearance , to remove the bushes and making area workable complete all as specified and as directed.

Dismantling of, stone slab of any description or thickness in floor, aprons etc laid, bedded and pointed in CM complete all as specified and as directed.

Dismantling of floor hearth wall tiling including cement mortar beddind but not backing removing serviceable material to store complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving n exc 15cm thick above or below ground level complete all as specified and as directed.

Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete all as specified.

M&L for providing Pre cast cement concrete jalli 35 mm thick, in repairs type B0 using 12.5 mm graded aggregate, set in CM 1:4 complete all as specified and as directed.

M&L for 15-20mm thick granite slab, machine cut, well polished, bedded in 15mm thick in CM 1:4 like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc. complete all as specified and directed. Note: External ( Front ) edge of stone slab shall be made half round and coast thereof shall deemed to be included in the unit rate quoted by the tenderer complete all as specified and as directed.

M&L for coloured ceramic glazed tile (Premium quality) , 7 to 8mm thick (square / rectangular) on vertical surfaces in Cement slurry and pointed in coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for Granite tiles 10-15mm thick machine cut, in wall laid over 10mm thick cement screed in CM 1:4 like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc. complete all as specified and directed. Note: External ( Front ) edge of stone slab shall be made half round and coast thereof shall deemed to be included in the unit rate quoted by the tenderer.

M & L Machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick cement screed bed in CM 1:6 laid laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M & L Machine cut kota stone slab flooring 20-25mm thick in riser of steps,skirting, dado & pillar over and including 15mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M &L chequered tiles (Cement) 20cm X 20cm x 25mm thick, set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over & including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L 60 mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement & no pigment complete all as specified and as directed.

M&L for sand laid in cushioing to precast concrete interlocking paver block including watering & consolidation etc complete and as directed.

M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified

M&L for 50 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) laid in alternate panel , incl providing glass strips of size 38 mm wide and 3 mm thick fixed in position for making panel as in floor , floor surfaces finished even and smooth using extra cement complete all as specified and as directed

M&L for PCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed.

Demolition of brick work/ stone boulder built in cement mortar or cement lime mortarcomplete all as specified and as directed.

M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:6 complete all as specified and as directed.

M & L Brickwork with subclass `B' bricks (old size bricks), in half brick thick wall in honey comb, built in cement mortar in (1:4) complete all as specified and as directed.

M & L Brickwork with subclass `B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in cement mortar in (1:6) complete all as specified and as directed.

M&L walling of random rubble masonry uncoursed, well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified and as directed.

-Ditto- but item No. 25 above but except stones.

M& L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces , surface finished smooth and even without using extra cement etc complete all as specified and as directed.

M&L for providing reinforced cement concrete 1:2:4 type B-1 (using 20mm graded aggregate) in precast post, fencing post,straing or terminal post, struts etc for fencing,average sectional area exc 100 and nexc 250 sq.cm, with or without chamfered angles and flat, splayed,rounded or mitred tops as directed and fixed all as specified

S & F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with with 2 mm dia barbs at 75 mm at spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with land provision of galvanised mild steel pins etc complete all as specified and as directed.

S & F Post and struts in fencing including cutting tops to shape as directed , drilling holes notching for barbed wires etc ;flat iron fillets (for securing wire mesh) including all necessary drilling, bolting or riveting etc complete all as specified and as directed.

S & F bands , straps supports or stays for hooks(stay), heavy for large gates; hook and pintle hinges;large hasp and staples; chains including cutting to shape complete all as specified and as directed.

Supply only MS galvanised chain link fencing including 4mm dia galvanised wire plain fixed on both sides for straighting (wt. of chain link fencing n.exc 3.50 kg/sqm) complete all as specefied and as directed.

Fixing only chain link fencing including fixing of line wires, any mesh, size and type to any type of staindard rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed

S & F framed work such as grills, gratings, door etc with ends of bars shouldered and/riveted or forged into spikes; framed guard bars; barren iron doors; ladders; framed balusters;walk ways;railings and similar work incl cattle trap confirming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of Red oxide, Primer including preparation of surface over 10 cm width and girth etc complete all as specified and as directed.

M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping band etc including the necessary formwork complete all as specified and as directed.

M&L for TMT bars 6 to 8mm dia , cut to length, bent to shape required , including cranking , bending spirally for ,hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing clips complete all as specified and as directed.

M & L for formwork to edges of concrete , opening in cocnrete walls, floors and roofs and side of RCC/PCC bands in walls and simillar work all exceeding 20 cm wide complete all as specified and as directed.

Excavation in post holes each not exceeding 0.5 Cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50 M and making good surface complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in foundation,filling and mass concrete all as specified

M&L for preparation of New surfaces and applying two coats of cement base paint with roller with primer on New Surface complete all as specified and directed.

N K ENTERPRISES

M/S Chadha Brothers

M/S M S Constructions

M/s Hansraj Shivhare

Ms Vinay constructions

m/s bobby enterprises

Ayush Enterprises

M/s Pratham Enterprises

M/S BABA CONSTRUCTION