8552 SPECIAL REPAIRS TO ROOF COVERING AND FALSE CEILING BLDG NO ET-07, ET-08, ET-09 AND ET-10 AT BSC LIVING ACCN UNDER OLD NDA COMPLEX UNDER GE (CENTRAL) PUNE

Amount

Dismantling of AC sheet corrugated, or semi corrugated in roof covering.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of AZ-150 Grade an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of AZ-150 Grade any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, bent to shape as required and directed fixed with self tapping screws as specified and directed

M&L for 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws for false ceiling on GI powder coated grid work 605 mm x 605 mm with using 36.5 mm x 23.5 mm x1.5 mm thick main tee, 23.5 x 23.5 mm x 1.28 cross tee and 25 x 25x 1.5 mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 605 x 605 mm, Including Dismantling of wall and ceiling board and cover fillets.

Taking down Chowkhats or frames not exc.1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed .

Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 20mm thick screed bed of CM 1:6 complete.

M&L for coloured glazed ceramic tiles of size 450x300x7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:3 complete all as specified.

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 146 of SSR 2004 part 11. The width of stiles and rails shall be as specified in para 8B.2.1 on page 134 of SSR 2004 part 11. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS butt hinges. complete all as specified and directed.

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2004 Part 11 complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles fabricated type.

S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed

Taking up or down 15mm bore steel water tubing and connection including cleaning for refixing or removal to store of 15mm bore and M&L for GI tubing 15mm bore fixed to walls, ceilings or laid in floors medium grade concealed all as specified.

Taking up or down 20 mm bore steel tubing and connections, including removing from site and S&F Tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Dismantling of water and removing to store capacity 1000 litres and S&F 1000 litres rotational mouded polyethylene three layer water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I incl 20mm bore ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe/PPR pipe or brass ferrule and fixed.Complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves ISI marked, 15mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S & F in repair Gun-metal, globe or gate valves ISI marked, 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repairs CP Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type.Make Jaquar cat part no:FLR-5047N or equivalent model in KOHLER and ROCA.

S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe. Make Jaquar cat part no:FLR-5015 or equivalent model in KOHLER and ROCA.

S&F in repair Angle valve 15 mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions.Make Jaquar cat part no:FLR-5053N or equivalent model in KOHLER and ROCA.

S&F in repairs Vitreous China wash basin, white/coloured, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets and 32mm dia 1mtr long PVC waste pipe.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) inclusing health faucet.Make Jaquar cat part no: CNS-WHT-551SNPP184LZ or equivalent model in KOHLER and ROCA.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets

S&F PVC connections 15mm size with PTMT nuts of length 450mm

S&F in repair 75mm dia PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S&F 110mm bore PVC rain water pipe single socketed with rubber ring joints fixed to wall including dismantling complete all as specified & directed

S&F 75mm bore PVC rain water pipe single socketed with rubber ring joints fixed to wall complete including dismantling all as specified & directed

S&F 110mm bore PVC bend any radius complete all as specified and directed.

S&F 75mm bore PVC bend any radius complete all as specified and directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long.

M&L preparation of old/newly plastered surfaces of walls of any description and applying one coats of oil bound distemper complete all specified and directed.

M&L for preparing old plastered or unplastered surface of walls and applying one coat of cement based paint complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete

S&F 15mm bore chromium plated concealed cock fancy type

Demolition of uneinforced cement concrete of any description and in any position on roof slab/sunken slab as in padding etc including removing rubbish off the premises complete all as directed.

M&L for 40mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregates) finished even and smooth without using extra cement as in roof padding and similar items mixed with liquid water proofing compound complete all as specified and directed. Note: WPC shall be measured and paid seperately.

Supply only liquid water proofing compound

Taking down of existing Ceilling fan / Wall mounted fan/ Exhaust fan of any size and sweep and keeping safe custody and refixing the same existing place with serviceable condition by minor repairs such as capacitor replacement, bearing repalcement and painting, clamping of fan rod to roof iron channel, required down rod as per site requirement complete all as specified and as directed. Note : The quoted rate shall include the rates of spares, rod and clamps mentioned above.

Taking down of existing Ceilling fan / Wall mounted fan/ Exhaust fan of any size and sweep and keeping safe custody and refixing the same existing place with serviceable condition by minor repairs such as capacitor replacement, bearing repalcement and painting, clamping of fan rod to roof iron channel, required down rod, rewiring of fans complete as per site requirement complete all as specified and as directed. Note : The quoted rate shall include the rates of spares, rod and clamps and rewiring of fan mentioned above.

M&L for point wiring of any length using approved colour coding as per IS with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS H cable 1100 volts grade, ISI - 694 marked in PVC casing caping 25mm wide ISI marked including all accessories etc. with PVC modular boxes/PVC Sunken Boxes as required at site and as directed including modular frame/cover plate suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified and directed for the following:- Note:- The quoted rate shall include taking down of copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc Making good of disturbed surfaces will be done by contractor without any extra claims.

(a) One light point controlled by one switch complete all as specified and directed.

(b) One fan/exhaust point controlled by one 5 Amps one way modular switch and modular regulator complete all as specified and directed.

(c) two light point controlled by one switch

(d) One 5/6 Amp socket controlled by one switch same board complete all as specified.

(e) One 3 pin 5 Amps Socket outlet point controlled by one switch on independent board complete all as specified

All as per item no. 41 above but with 2.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed multistranded FRLS H cable 1100 volts grade, ISI - 694 marked, including PVC insulated multistranded copper conductor 2.5 Sqmm single core cable for earth continuity conductor for one 3 pin 5/15 Amps switch socket / Earth plug socket independent and connecting to common earth dolly complete all as specified.

S&F modular switch single pole one way 5/6 Amps including connection complete all as specified and as directed

S&F socket out let 5/ 6 Amps 3 pin modular type incl connection complete all as specified and as directed

S&F modular rotating step type electronic fan regulator( 5 step), 100W /240 volts two module incl connection complete all as specified and as directed

S&F modular socket twin type, 5 pin 6/16 Amps incl connection complete all as specified and as directed

S&F modular switch type single pole one way 15/16 amps incl connection complete all as specified and as directed

S&F in repairs ceiling rose, surface, three terminals incl connection and back plate complete all as specified and as directed.

Supply and fixing in repairs aluminium housing LED lights fitting 1x 20W, 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling complete all as specified and directed

Supply and fixing in repairs round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified Note : The quoted rate shall include the cutting of sheet.

Supply and fix in repairs LED tube light 2 feet 10W PVC body tube light complete all as specified

Supply and fix LED in repairs building security light 30 W IP 65 pressure die cast aluminium housing with GI bracket of suitable size complete including clamps , screws etc and dia complete all as specified and directed

S&F Sub main wiring with 2 runs of single core, 6 Sqmm PVC insulated, unsheathed, 1100 volts grade multi-stranded, copper conductor cables (FRLS quality) drawn through PVC casing capping with fitting/accessories, fixed on roof, walls, ceiling etc including 6 Sqmm PVC insulated, unsheathed, single core, multistranded, copper conductor as earth continuity wire complete as specified and directed. Note : Rate includes (i) PVC casing capping and its accessories (ii) Two runs of cable and one run of earth wire of size 6 sqmm and including taking down of old U/S submain (iii) taking down of old U/s wiring

S&F in repairs of MCB SPN DB 8 way IP-43 powder painted with bus bar 100A, neutral link, earth bar and Din rail ,230 Volts with double door including taking down old unsv DB and making the the surface good to match with adjucent complete all as specified and as directed

Supply and fix in repairs TPN DB vertical 6 way IP 54 with incoming provision for MCCB as incomer and 3 Phase Outgoing, Double door, 415 V bus bar capacity 250A including taking down with MCBs/MCCBs complete Note: Rate of MCCB Shall be considered separately

S & F MCCB 100 Amps 4 pole 415V,16KA complete all as specified and directed

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.0 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl galvanised iron wire 4mm as earthing lead and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover , watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit with cover incl excavation and earth work in any type of soil and testing on completion etc complete.

Supply and fixing amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

(a) SP 5 To 32 AMP

(b) SPN 40 AMP

Supply, laying and testing cable XLPE Insulated ,galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of size 35.0 sq mm 3.5 core

Excavation in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of LT UG cable/poles etc in soft/loose soil and getting out complete all as specified.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point for any type of excavation.

M&L for laying of CABLE COVER 100MM dia 2 Nos half round (for bottom and top) and before laying excavation of area shall be levelled all as specified and directed.

Supply and laying 40 mm GI pipe light grade with and incl all fittings such as bends, elbows, tees short pieces, union etc in trenches or fixing on wall complete all as specified and directed.

S & F MCCB 63 Amps 3 pole 415V,16KA complete with fixing in existing panel all as specified and directed

M & L for Cutting of road/hard standing and making good with PCC (1:2:4) using 20mm graded stone aggregate complete all as specified.

Parhar Enterprise (BID ID -3169104)

SAI TILES ARTS (BID ID -3165394)

M/s Asrani and sons (BID ID -3169603)

M/S NAVNEET S MORDE (BID ID -3169096)

PRANAV ENTERPRISES (BID ID -3169366)

ANIL CONSTRUCTION CO. (BID ID -3169548)

SHREESAMARTH CONSTRUCTION (BID ID -3169187)

BSK Construction (BID ID -3169439)

L.T Associate (BID ID -3169636)

MANIYA CONSTRUCTION CO (BID ID -3169578)

R K Construction (BID ID -3169679)

RK ENTERPRISES (BID ID -3169241)