Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 CrAccepted-Finance | ₹1.6 Cr | L1 | Accepted-Finance ACCEPTED |
| 2 | L2₹1.7 Cr+₹14.1 L (8.94%)Accepted-Finance | ₹1.7 Cr+₹14.1 L (8.94%) | L2 | Accepted-Finance ACCEPTED |
| 3 | L3₹1.8 Cr+₹17.0 L (10.7%)Accepted-Finance | ₹1.8 Cr+₹17.0 L (10.7%) | L3 | Accepted-Finance ACCEPTED |
| 4 | Rejected-Technical | - | - | Rejected-Technical Rejected during technical evaluation due to deficit documents. |
Tender Value
Refer Docs
Closing Date
8 Aug 2022, 2:00 pmClosed
Executive Engineer EDD Leh
Office of the Executive Engineer EDD Leh
Supply, Installation, Testing and Commissioning for Creation of Sub-Stations 11 .415kV of various capacities along with laying of HT LT Lines at various locations of Khalsi section of Leh District under SDP 2022 23 on full turnkey basis
2022_PDNRE_7191_1
eNIT No. 61 of ED Leh of 2022-23 Dated 03.08.2022
Open Tender
Electrical Works
Turn-key
90 days
Leh
Please refer Tender documents.
6 documents required · 6 mandatory
₹3,500
Payable To Executive Engineer EDD Leh
Exempted
19 Sept 2022
3 Aug 2022
9 Aug 2022
4 Aug 2022
8 Aug 2022
4 Aug 2022
Amount
100 KVA, 11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, (Aluminium wound upto 200kVA, Copper wound for 250kVA or higher kVA ratings) , and with LV Cable Box having detachable Aluminium Gland plate
63 KVA, 11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, (Aluminium wound upto 200kVA, Copper wound for 250kVA or higher kVA ratings) , and with LV Cable Box having detachable Aluminium Gland plate
25 KVA, 11/0.433kV, 3-phase Distribution Transformers with Bimetallic Terminal Connectors Energy Level- 2, (Aluminium wound upto 200kVA, Copper wound for 250kVA or higher kVA ratings) , and with LV Cable Box having detachable Aluminium Gland plate
Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type
11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type
11 kV Horn Gap Fuse Set 3 Phase 200A
120mm² (Double CKT) Cable, 1.1kV Grade, PVC Insulated Stranded Conductor FRLS type for 100KVA DTs
70mm² (Double CKT) Cable, 1.1kV Grade, PVC Insulated Stranded Conductor FRLS type for 63KVA DTs
25mm² (Single CKT) Cable, 1.1kV Grade, PVC Insulated Stranded Conductor FRLS type for 25KVA DTs
9 Mtr. Long Pole,ST-410 SP33)
33kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm
GI Channel/Angle/Flat of sizes including clamps
Galvinized Nuts and Bolts.
Earthing of substation --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239.GI Strip for neutral earthing of size 25 mm x 3 mm for connection of transformer body,G.O Set & lightening arrestor as per IS 2629/85, GI nuts & bolts,refilled with earth enhancement materials and earth Chamber made of brick masonary with RCC slab cover.
33kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm
LT Distribution Box for 100kVA DTR with TPN MCCB short ckt rating 16 KA for incomer 160Amp and suitable MCCBs for outgoing circuits with terminal extensions
LT Distribution Box for 63kVA DTR with TPN MCCB short ckt rating 16 KA for incomer 90Amp and suitable MCCBs for outgoing circuits with terminal extensions
32Amp TPN Switch disconnector fuse unit
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
Danger Plates with Clamps
GI Barbed Wire for Anti Climbing
3-Ø, 4-Wire Trivector Meter with CT(LTCT AMR compatible)
Cement bottoming 1:2:4 mix as per REC standards .5cum/pole
Painting of Poles Red Oxide
Painting of Poles Aluminium Paint
Sundry items like aluminium lugs, Jumpers,
HT Line
9 Mtr. Long Pole( ST-410 SP33)
GI V Cross Arm including clamp as per specification (14.631kg/complete v-set)
GI Channel including clamps and braces 80 Kg per DP Str.
30 mm² ACSR Conductor
33kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm
PG Clamps for 30 mm² ACSR Conductor
33kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm
Galvinized Nuts and Bolts
Danger Plates with Clamps
Anti-Climbing Device with Clamps
Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.
Red Oxide
Aluminium Paint
Cement bottoming 1:2:4 mix as per REC standards .45cum /pole
Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete
LT 3 Phase ( 3P4W)
8 Mtr. Long Pole( ST-410 SP15)
4' Channel with Clamp(8.83 KG)
30 mm² ACSR Conductor
16kN Polymer Shackle Insulators
Galvinized Nuts and Bolts.
Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.
Red Oxide
Aluminium Paint
Cement bottoming 1:2:4 mix as per REC standards .45cum/pole
LT Line Spacers
LT 1 Phase ( 1P2W)line
8 mtr. Long Pole(PCC WL-200Kg , ST-410 SP15)
2' Channel with clamp (4.83 KG )
30 mm² ACSR Conductor
16kN Polymer Shackle Insulators
Galvinized Nuts and Bolts.
Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.
Red Oxide
Aluminium Paint
Cement bottoming 1:2:4 mix as per REC standards .45cum /pole
LT Line Spacers
M/S LOBZANG GURMET GOVT CONTRACTOR
DRUK ELECTRICALS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .