SPL REPAIR TO ROOF OF BLDG NO P-165 ECHS PLOYCLINIC, UPGRADATION/ ALTREARTION TO INBUILT CUPBOARD AND SHELVES WITH PVC DOOR AND GRANITE AT P-4, P-6, P-43, P-106, T-20, T-22A, T-23, P-122A, T-4, T-101, PROVN OF FLOORING WITH TILES FOR WAITING AREA SHE

Amount

Dismantling of Brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed.

Demolition Mud in roofs, any thickness, including plastering including sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

M&L for providing plain cement concrete, type B-1, 1:2:4 (using 12.5 mm graded stone aggregate) as in roof kerbs, padding, Gola, rounded or chamfered on edges complete all as specified and directed.

M&L for 20 mm thick rendering on concrete surface of roof with cement mortar 1:4 finished even and fair including mixing of water proofing compound as per manufacturers instruction complete all as specified and directed. (Note: Water proofing compound shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified and as directed.

M&L for roof treatment with polymeric membrance (APP based) with non woven polyster mat as reinforcement with following:- (a) M&L for cleaning the new plastered surface and providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.30 Ltr/Sqm on dry and clean surface. (b) M&L for providing & laying APP based polymeric membrane of 4 mm thickness of weight of 3.0 Kg/Sqm with non woven polyster fibre as reinforcement on primed surface by torch application with 15 cm end over laps & 10 cm side over laps (overlaps to be thermo fused by flame) and applying one coat of hot blown bitumen 85/25 @ 0.70 Kg/Sqm all as directed. (c) M&L for finishing of top surface by a coat of aluminium paint complete all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M & L for brick work with sub-class B brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, external surfaces of walls finished and even & fair without using extra cement complete all as specified & as directed.

M&L rendering 15mm thick in Cement Mortar 1:6 on other than fair faces of brick surfaces of walls finished the surface even & Smooth without using extra cement complete all as specified & as directed.

M&L for applying two coats of cement based paint on newly plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound emulsion distemper over a coat of alkali resistant primer complete all as specified.

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Refixing old 25mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc complete all as specified and as directed.

Refixing old 20 mm bore steel tubing and connections in new or old position (Walls, ceiling, floors, etc) complete all as specified and as directed.

S&F 25 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F 20 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S & F 15 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Dismantling water tanks exc 250 & n exc 500 ltr capacity and removing to store complete all as specified and as directed.

S&F 500 ltr Rotational moulded Polyethylene water storage tank triple layered (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F in repair 20 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 20mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M&L for PCC type CI 1:2:4 using 20mm graded crushed stone aggregate in plinth courses, string courses, lacing courses, complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.

S&F GRG (Glass fibre reinforced Gypsum) semi perforated 12 mm thick tiles of size 595 x 595 MM of approved texture, design (Tegular) and patterns having moisture content white colour less than 2% humidity resistance of 99% NRC 0.60 to 0.85 as per IS 8225:1987, Non combustible as per BS 476 Sub Head : 26.0 New Technologies and materials reflectance of 85%(Min) to be laid in true horizontal level suspended on interlocking metal T grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross Tof size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items(galvanised @ 80 grams per sqm ) i e 50mm long, 8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x2 mm. Galvanised iron perimeter wall angle of size 24 x 24 x0.40mm thick of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as shown in drawings, as specified and as directed.

Taking down of chowkhat or frame (without taking off shutter from frame) area exc 1.50 Sqm & not exc 4.00 Sqm each including builder hardware fitting complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section using FE-290 (Gde-E-165) with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces, width or girth exc 10cm including necessary preparation of surfaces complete all as specified and as directed.

S&F 100mm long butt hinges medium weight cold rolled mild steel with Brass screws complete all as specified and as directed.

S&F 200 mm long Stainless steel handles, Fancy type and fixed complete all as specified and as directed.

S&F 18/19mm thick PVC moulded solid board one side prelaminated for cabinet boxes etc with self and shutter full size fitted under/ above the kitchen cooking platform and other platform including piano hinges knob and magnetic catches as required complete all as specified and directed.

M & L plain cement concrete type B-0 1:2:4 (12.5mm graded aggregate) for bed block, hold fast, coping and similar work complete all as specified and as directed.

M & L in repair 20 mm thick Granite slab (of any type) work (table rubbed and polished), in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & half curving the edges of granite stone slab, Half moulding, over and including 20mm thick screed in cement mortar 1:6 including demolition of old stone slab complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of walls, finished the surface fair and even without using extra cement complete all as specified and as directed.

M&L preparation of new plastered wall surfaces and applying two coats of Oil Bound Distemper over and including a coat of alkali resistant primer, over and including 3 mm thick cement based wall care putty complete all as specified and as directed.

Surface excavation not exc 30 CM deep and avg 15Cm deep and getting out in soft/loose soil complete all as specified and as directed.

Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

M&L for PCC type D -2 (1:4:8) using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Hardcore of guage of broken stone or boulders exe. 63mm but n exc. 100mm, deposited spread and levelled in layers exe 15 CM thick watered and rammed to a true surface complete all as specified and as directed.

M&L for 100mm PCC type D -2 (1:4:8) using 40 mm graded crushed stone aggregate as in Sub base complete all as specified and directed.

M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

S&F Kerb stone of 300x300x 100mm thick precasted plain cement concrete type B0, 1:2:4 , using 12.5mm graded crushed stone aggregate incl earth work for laying kerb stones complete all as specified and as directed.

M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including clear angle, Aluminium snap beading for glazing/ paneling, C.P brass/ stainless steel screws complete all as specified and as directed.

S&F 5.5mm thick Figured glass, ordinary quality in square not exc 0.5 Sqm in each pane complete all as specified.

S&F Powder Coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges, anodised snap beading screws etc powder coating of any colour (thickness or powder coating not less than 50 micron) complete all as specified and as directed.

S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and as directed.

S&F 12mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed in Alun/ timber frame work complete all as specified and as directed.

S&F Aluminium Door closer hydraulically regulated, designation No. 3, Universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed. Make- Sandhu/ Plaza/ Godrej/ Hardwyn

S&F Brass Mortice lock 4 levers, vertical type, size 100 mm complete all as specified and directed. Make- Plaza/ Godrej/ Harrison

S&F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified.

M&L point wiring for modular switches with 2.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, drawn through and including conceale wiring with PVC Conduit of minimum 25mm dia or as per site requirement with all fittings, including cadmium plated screws as per IS, including 2.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, suitable for 15 Amps socket outlet on independent board with 2.5 Sqmm size of earth conductor complete all as specified and directed.

M&L point wiring for modular switches with 1.5 Sqmm, PVC insulated, unsheathed, multistranded, copper conductor Cable, FRLS, 1100 Volt grade, drawn through and including conceale wiring with PVC Conduit of minimum 20mm dia or as per site requirement with all fittings, including cadmium plated screws as per IS, including 1.5 Sqmm size, PVC insulated, unsheathed, copper earth continuity conductor, connected to earth dolly, suitable for one three pin 5 Amps socket out let on independent board complete all as specified and as directed.

All as per item No. 59 above but point wiring of copper cable multi stranded 4.00 Sqmm size for AC point wiring with 4.0 Sqmm size of earth conductor complete all as specified and directed.

S&F Modular switch, flush button type, single pole, one way 10 Amps complete all as specified and directed.

S&F Modular socket outlet 3 pin and 2 pin, 10 Amps, flush type complete all as specified and directed.

S&F Modular switch, flush button type, single pole, one way 16 Amps complete all as specified and directed.

S&F Modular socket outlet 2-in-1, 3 pin, 10 and 20 amps , flush type complete all as specified and directed.

S&F sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps, 240 Volts complete all as specified and directed.

S&F modular white cover plate with frame , 3 module complete all as specified and directed. Make: Anchor Roma /Legrand/ indoasian

S&F modular metal flush box, 3 modules complete all as specified and as directed. Make: Anchor Roma /Legrand/ Indoasian

M&L for sub main wiring with 2 runs of 4 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit 25mm medium grade fixed to the surface of walls/ ceiling as per ISS and one run of 4 sqmm earth wire size PVC insulated copper conductor complete all as specified and directed. (Note: Two run of cable and earth conductor including conduit shall be measured as one length)

M&L for sub main wiring with 2 runs of 6 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit medium grade as per ISS and one run of 6 sqmm earth wire size PVC insulated copper conductor complete all as specified and directed. (Note: Two run of cable along with one run of earth conductor including PVC rigid conduit shall be measured as one RM length)

S & F distribution board double door type, SPN, 4 way, complete including 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed.

S & F MCB SP, 240 Volts, 6 to 32 Amps complete all as specified and directed.

S & F MCB DP, 240 Volts, 40 Amps complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement motor 1:3 to ends or edges of landings, steps , cills, sunshades, shelves, Iintles, etc, and cutting chases for concealed conduit wiring etc, and making good, cutting not exc 10cm girth complete all as specified and as directed.

Supply and fixed desert cooler electric driven single phase 5000 CFM made out of 18 gauge GI sheet dully painted having size 26x26x36'' complete with fan motor and suitable blades of sweep 18'' and water pump with all accessories like PVC pipe and tee with suitable size complete with side grill (fitted with grass pad) front grill with adjustable louvers duly wired with high medium and low controlling knob and complete all as specified and directed. Motor Make Khaitan/ CG/ Usha & submersible pump. Make- Zoloto/CG/Usha/Khaitan

Supply and fixed prefabricated MS desert cooler stand for desert cooler of size 26"x 26"x 36" made out of MS angle iron frame of size 25 x 25 x 4 mm in cubical shape and MS flat iron strip of size 20 mm width and 3 mm thickness to hold the legs of cooler stand at the bottom including welding and duly painted with two coat of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.

M&L wiring with 1.5 sqmm single core, PVC insulated & unsheathed (FR) cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit medium grade as per ISS etc complete all as specified and directed.

S&F Modular Switch 1 way 6 Amp, 1 module complete all as specified and as directed.

S&F Modular Socket 6A, 2/3 Pin combined 2 module complete all as specified and as directed.

S&F Moduler plug top of 6 Amps. Make :- Anchor Roma/ Legrand/ Anchor woods

S & F distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper busbar, neutral bar, earth bar, IP 43 protection, single pole and neutral 240 Volts, flush to wall complete all as specified and directed.

S & F MCB SPN, 240 Volts, 32 Amps complete all as specified and directed. Make-Havells/Legrend/Crabtree

S & F MCB SP, 240 Volts, 40 Amps complete all as specified and directed. Make-Havells/Legrend/Crabtree

S&F Water heater geyser of Capacity 25 Ltr (5 Star BEE Rating) complete with all accessories such as glass lined enamel coated incology heating element, temperature indicature dial, shock resistant ABS outer body, fire retardant cable, tank design is suitable to withstand 8 bar pressure assembly, element of 2.0 KW Cap including grouting necessary fastner, nut and bolts of suitable size on the existing walls and making good disturbed surfaces all as specified and directed.

M&L point wiring for normal switches with 4 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 Volts grade, drawn through concealed Conduit as requirement of site including cadmium plated screws as per ISS, including replacement of 3 mm thick phenolic laminated sheet top covers on and including sunk type CI/steel terminal boxes concealed in wall including 4 Sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly for 15 Amps socket outlet on independent board with 4 Sqmm size of earth conductor complete all as specified and directed.

S & F Ceiling rose, PVC/ polycarbonate, isolated body type three terminal, 240 volt complete all as specified and directed. Make- Anchor Penta/ Havells/ SSK

M&L point wiring for normal switches with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed (FRLS) cable 1100 Volts grade, drawn through PVC Conduit 20mm concealed as requirement of site including cadmium plated screws as per ISS, including replacement of 3 mm thick phenolic laminated sheet top covers on and including sunk type CI/steel terminal boxes concealed in wall including 1.5 Sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly for One light point controlled by one switch 5 Amps one way single pole complete all as specified and directed.

S&F switch piano, flush button type, single pole, one way 05 Amps complete all as specified and directed.

S & F bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for size 15 mm dia pipe complete all as specified and as directed.

S & F stop valve/ angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions for size 15 mm dia pipe complete all as specified and as directed.

S & F PVC connections 15 MM size with PTMT nuts of length 600mm complete suitable for Hot & cold water complete all as specified and as directed.

S & F Metallic grey exhaust fans of size 300 mm sweep AC single phase 230/240 V , RPM 1375 , Power 42 Watt, with louver, fixed as per manufacturer instruction, connecting with and including 1.5 Sq mm copper conductor, PVC insulated and PVC sheathed three core cable including making suitable size hole in brick/PCC block/ Stone masonary wall built in cement mortar and making good disturbed surface complete all as specified and as directed.

All as per above Srl item No. 91 above but PVC body maxima DX exhaust fan of size 250 mm sweep, 1325 RPM.

M&L for cutting existing window grill /wire mesh with suitable T&P for making desired opening for Aluminium frame work to fix Exhaust fans of size 250 & 300 mm on prefabricated aluminium frame, including all joinery, welding & carpentry work and making good to disturbed surface complete all as specified and directed.