REPAIR MAINTENANCE TO BRICK WORK,FLOORING JOINERY HARDSTANDING PATH PLINTH DRAIN SEWAGE SYSTEM ETC IN ZONE D UNDER AGE BR I OF GE WEST AGRA

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar fixings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed.

Discription all as per item No. 4 above but except bricks Note: Old brick obtained from Item No. 02 here-in-before shall be re-used after cleaning.

M&L for 15mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 on concrete surfaces of ceiling finished even & fair without using extra cement complete all as specified and directed.

M & L for glazed ceramic tiles of size 300 x 200 x 7 mm (Ist quality/Premium quality), coloured in vertical surfaces such as riser of steps, skirting, dado and pillar, over and including 10 mm thick rendering as bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L non skid ceramic coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exc. 0.18Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed or bedding layer of cment mortar (1:4) complete all as specified and directed.

M&L non skid ceramic coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11Sqm but not exc. 0.18Sqm in vertical surfaces such as riser of steps, skirting, dado and pillar, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed or bedding layer of cment mortar (1:4) complete all as specified and directed.

M&L for vitrified ceramic any coloured/pattern tiles 10mm thick (square /rectangular), polished (Ist quality/Premium quality), area of each tiles n' exc 0.36 Sqm in floors etc, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for vitrified ceramic any coloured/pattern tiles 10mm thick (square /rectangular), polished (Ist quality/Premium quality), area of each tiles n' exc 0.36 Sqm in verticle surface etc, laid over and including 15 mm thick rendering or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M&L for 16 to 18 mm thick Granite (of any type) work (table rubbed and polished both face ) for wall lining (veneering to wall)/Urinal partition etc. 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite., complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.

M&L for 75 mm thick cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) in floors, paths, pavings to be finished even and smooth without using extra cement complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters form the frames) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters form the frames) exc 1.5 Sqm but n. exc. 4 sqmeach complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

Refixing the shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each in the same opening or in other opening complete all as specified and directed.

Taking down and refixing the aluminium door shutters in the same opening or in the other opening adjusting after sesecuring or easing, cleaning/greasing of floor door spring/closer, adjustment of lock device/snap beading/glazing clips/screws etc. & any description exc 1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed.

M&L for rolled mild steel Framed work as in doors or Gates or as in chowkats of angle or other section quality confirming to Fe-410-W(Gde E-250 quality-A), complete all as specified and directed.

S & F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood (Hollock / Binteak / Sal / Bijasal ) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass etc; size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a); supplied and fixed to chowkats, complete all as specified and directed.

S & F 2nd class hard wood (Sal) small fittings such as brackets of any type, latch and hinge block, shaped door and window stops and the like articles including all necessary labours, articles n.exc 200 Cucm each complete all as specified and directed.

S & F steel windows with side hung shutters including box type hinges with Z section steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F steel windows with side hung shutters including box type hinges with Z section steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S & F steel ventilator with top hung shutters including box type hinges and steel peg stay, complete complete all as specified and directed

S & F Mild steel work in framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged in to spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings, frame work of water tanks, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement including 3 Nos, 100mm long stainless stell miduim weight hinges, 2 Nos aluminium handle 150mm long and 2 Nos aluminium tower bolt 200mm long fixed to each shutter complete all as specified in clause No. 8B.2 at Sl page No. 143 to 144 and shown in drawing on sl page No 156 of SSR 2010 respectively and as directed.

S&F solid PVC frame of size 50x47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube supplying & fixing in opening as specified in clause No. 8B.3 at Sl page No. 145 and shown in drawing on sl page No 160 of SSR 2010 respectively and as directed.

S&F anodized aluminium door & frame weighting 0.55 Kg/RM including 5.50mm thick tinted glass, fixed with anodized aluminium snap beading, glazing clips, joining clips, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200mm long 02 Nos on each shutter and mortice lock device complete with double keys for each lock, 01 No floor door spring (double action) for each shutter complete all as specified and directed with following specifications :- (a) Aluminium door frame =101.50x44.45mm (Appx) (b) Aluminium style/top & middle rails of shutter=83.5x44.45mm (Appx) (c ) Aluminium bottom rail of shutter=114.50x44.45mm (Appx) (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements etc complete all as specified and directed.

S&F anodised aluminium window sliding type (Bombey pattern) aluminium section weighting 0.55 Kg/RM including 5mm thick plain glass, necessary jointing cleats, glazing clips, rubber neoprene packing, handle/Knob 2 Nos in each window, anodised aluminum snap beading, screw etc complete all as specified and directed

S&F aluminium grill of design and pattern as approved by Engr-in-Charge weight n less than 2.0 Kg/sqm complete all as specified and directed.

S&F in repairs 5.50 mm thick tinted sheet glass with necessary jointing cleats, glazing clips, rubber packing & anodised aluminium snap beading complete all as specified and directed.

S&F in repair 100 mm long Mortice latch with four levers (vertical type) , aluminium body and fixed complete all as specified & directed.

S&F in repair automatic floor mounted hydraulic door closure, heavy duty with pivot, aluminium body, ISI marked, complete all as specified & directed. Make: Sandhu or equivalent as approved by GE.

S&F in repair automatic hydraulic door closure, heavy duty with pivot, aluminium body, ISI marked, complete all as specified & directed. Make: Sandhu or equivalent as approved by GE.

S&F in repair rubber packing fitted to aluminium door/window complete all as specified & directed.

S&F in repair aluminium anodized snap and fitted to aluminium door/window complete all as specified & directed.

S&F 100 mm long mild steel butt hinges medium weight cold rolled fixed complete all as specified and directed.

S&F 125mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F 250 mm long mild steel sliding door bolts, plate type, stove enemelled black with bright bolt not less than 12mm dia with and including a minimum 6 bolts and nuts, 4 on plate and 2 on staple plate complete all as specified and directed

S&F 125mm size aluminium alloy, anodised handles, cast type complete all as specified and directed.

S & F Mild steel work as in bands, straps, supports or stays for rain water pipe, ventilating pipes including bolts, if required, hand made sliding door bolts, clamps, holdfasts, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S & F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square in each pane complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square in each pane complete fixed in repairs all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (20 mm graded aggregate) as in hold fasts block cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, copings, apex stones, bed plates etc complete all as specified & directed.

Taking up or down 15mm bore steel tubing and connections complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections complete all as specified and directed.

Taking up or down 25 or 32 mm bore steel tubing and connections complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

Refixing old steel water tubing 15mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.

S&F 20mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

Refixing old steel water tubing 20mm dia with and including new GI fittings and connected to new or old positions of walls, ceilings, floors etc complete all as specified and directed.

S&F 25 mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S&F 32 mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S&F in repair 500 ltrs capacity rotational moulded polyethylene water storage tank double layered, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

S&F in repairs 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

S&F in repair 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight -90gms) complete all as specified and directed.

S&F in repair 25 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 32 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repairs CP brass angular Angle/Stop valves 15 mm nominal bore conforming to IS-8931 Hindware Cat No.- 200005or equivalent.

S & F in repairs CP brass bib cock 15 mm nominal bore conforming to IS-8931 Hindware Cat No.- 200003or equivalent.

S/F in repair CP brass stop cock (concealed) 15 mm nominal bore with adjustable wall flange conforming to IS-8931 Hindware Cat No.- 200007or equivalent.

S/F in repair CP brass long nose pillar cock for wash hand basin (make : Hindware Cat No. F200001 or equivalent )all as directed and approved.

S/F in repair brass spindle for CP brass bib cock, stop/angle valve/ concealed stop valve etc. as per existing fittings at sites all as directed and approved.

S/F in repair vitreous china ware white / colour under counter oval / circular wash basin all as exist at site with CP brass waste coupling, waste pipe (make : Hindware Cat No 10049 or equivalent )all as directed and approved.

S & F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints, with arms any size, including fixing to steel pipe or union complete all as specified and directed

S & F in repairs towel ring in chromium plated brass complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified & directed.

S&F in repair 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including brackets, rubber bush, washers, flash pipe PVC 32 mm dia etc complete all as specified and directed.

S&F in repair 32mm bore PVC pipe as in waste pipes for sinks,complete all as specified and directed

S&F in repair white vitreous china semi-pedestal pattern water closet pan fixing with bolts including connecting to 100 mm bore CI 'P' or 'S' trap complete with following accessories :- (i) Flushing cistern capacity with lid (with fittings)complete - 01No. (ii) Flush pipe - 01 No (iii) PVC connection 600 mm long - 01 No (iv) Plastic seat cover - 01 No Make :- Hindware Cat No. : 20024 or euivalent as approved by GE.

S&F in repair vitreous China white squatting pan ‘Orissa’ pattern, size 580 x 440mm with integral foot rests including PVC ‘P’ or ‘S’ trap, front or back inlet connections to trap and to flushing pipe etc. set trap in and including concrete complete all as specified and directed.

S&F in repair vitreous China white flat back half large urinal including standard size PVC flush pipe, spreaders with union and clamp and making good the walls and floor whereever required complete all as specified and directed. Make :- Hindware Cat No. : 60002 or euivalent as approved by GE.

S&F in repair wall mixer with provn for OHS with 190mm long bend pipe wall flange complete all as specified and directed.Make: Ess Ess or equivalent make of Parko/Plumber/Hindware

S&F in repair central hole basin mixer without popup waste system with 450mm long flexible hose complete all as specified and directed. Make: Ess Ess or equivalent make of Parko/Plumber/Hindware

S/F in repair health faucet CP (ABS) with Rubit cleaning system 125 cm long PVC flexible tube and ABS wall hook.Hindware Cat No.- 160013or equivalent.

S/F in repair liquid soap container with mettalic body Jaguar Cat No.- 1137 N or equivalent complete in all respect.

S&F in repair CI floor trap with grating including jointing to waste pipe 75mm bore fixed in cement concrete (1:2:4) crushed stone aggregate weight of each floor trap n. less than 4.80 Kgs including CP grating 125mm dia with or without circular hole fixed in repair complete all as specified and directed

Repairs to leakage/seepage for existing CI pipe, bends, joints 100/75 mm bore removing mortar completely alround CI pipe, bends etc and refixed sealed with cement and polymer base chemical addisive all as directed and specified including cleaning of existing blockage if any to entire satisfaction of Engr-in-Chage.

S&F in repairs 100mm dia PTMT grating (min weight 25 Gms) complete all as specified and directed

S & Fin repair bracket of WHB including refixing wash hand basin including fitting complete all as specified and directed.

M&L for applying three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for two coats of oil bound distemper on wall surfaces over a coat of 1mm thick Birla putty on newly plastered surfaces walls incl preparation of surfaces complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface over 10 cm width or girth, not otherwise described complete all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface exc 10 cm in width or girth including preparation of surfaces.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed..

M&L for 4 mm thick 595x595mm 'E' board as in false ceiling incl powder coated GI grid system size 24x24mm angle or 24x40mm 'T' section of thickness 0.30mm to 0.40mm including 2mm dia GI wire/GI grid, adjustable suspender, fastening arrangements complete all as specified and directed.

S&F in repair 4 mm thick 595x595mm 'E' board as in false ceiling fixed with nails to timber frame work or with staple on snap grid all as approved by GE as in false ceiling on existing framed work including suspender complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar fixings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

Demolition of cement concrete (unreinforced)if any description and any position not otherwise specifically provided for cement concrete complete.

Taking down cement plaster on bricks or stone walls/ceiling etc including racking out joints, hacking for kay, scrubbing down with water.

Demolition of cement concrete reinforcement (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L PCC 1:4:8 Type D2 using (40mm graded stone aggregate) in foundations, filling and mass concrete etc complete.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6)

All as item No. 6 above but except bricks (Note :- Old bricks obtained from ser item No. 1 shall be reused after cleaning) complete all as specified and directed.

Material & Labour plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate as in copings, bed plates/blocks etc. including use of necessary form wk complete all as specified & as directed.

M & L PCC 1 : 3 : 6 type C – 1 (20 mm graded stone aggregate) as in surface channels and drains including necessary form work

Extra for forming fair finished drain or channel 30 cm inner girth in Cement concrete using extra cement incl forms,moulds,metered/stopped ends etc.

M&L Rendering 15mm thick plastering in CM 1:4 fair/other than fair faces of bricks work finished even and smooth (without using extra cement).

M&L precast cement concrete (1:2:4) type B-1, using 20mm graded stone aggregate set in cement mortar 1:4 as in manhole cover slab including placing in position complete all as specified.

S&F Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and as directed.

S&F as in repairs 40 to 50mm thick sand stone slab for cover slabs for manholes n.exc 2 M in length laid dry complete all as specified and directed.

Excavation in trenches n.exc 1.5M in depth and 1.5M wide including getting out in any type of soil

Returning, filling in including spreading, levelling watering and well ramming in layers n. exc. 25 cm in soil.

Removing excavated soil to a distance n. exc. 50 meter and deposited where directed at a level n. exc. 1.5 meter above the starting point.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 mixed with WPC as per manufacturer's instruction and finished the surfaces even and smooth without using extra cement complete all as specified and as directed (Note:- WPC will be measured and paid for separately.

Supply only Integral water proofing compound.

Demolition and breaking up 150mm drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar.

M&L Cement concrete 1:4:8 type D-2 (using 40mm graded agg.) as in concrete bed to drain pipe including packing under and hunching against the sides of pipe after they are laid and tested for 150mm dia SGSW pipe.

M&L 150mm dia SGSW drain pipes laid in trenches and jointed as specified.

Cutting into existing manholes150 mm bore pipe for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel ( ½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required.

S&F PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 110mm in reapirs.

S&F PVC (SWR) pipe single socket in any length with rubber ring joints fitted to wall 75 mm in reapirs.

S&F PVC (SWR) bends of 110mm radius to PVC SWR pipes including taking out existing bends.

S&F PVC (SWR) bends of 75 mm radius to PVC SWR pipes including taking out existing bends.

scjhaandsons

Apoorva Constrution

Asha Construction

N.K. ENTERPRISES

milan enterprises

M/S RISHI RAJ AGRAWAL

m/s max enterprises

M/s M S Sharma and Co.

M/s Singh Electric Co