CERTAIN REPAIRS TO JOINERY, SANITARY AND PLUMBING, ROOF AND FLOORING AND PERIODICAL SERVICES IN DLRL UNDER AGE B/R-III KANCHANBAGH

Amount

Supply & fixing of UPVC windows three track sliding window with two glazed and one wire mesh sliding shutters of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile modules - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural modules elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick plain sheet glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperture and filling gap of wall and frame with silicon sealent complete incl taking down old down old window complete all as specified. all as directed .

Supply & fixing of UPVC ventilators with top hung glazed and wire mesh shutters made out of profile width of frame 50 mm to 60 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile modules - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural modules elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutter fixed with 3 mm thick frosted glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and filling gap of wall and frame with silicon sealent complete incl taking down old down old ventilator complete all as specified all as directed.

Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames but with shutters (with out taking off shutter from the frames) Exc 1.5 sqm but n. exc 4 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1sqm but n. exc 2 sqm each complete all as specified and directed.

Supplying & fixing 1.25 mm thick Pressed Steel door frames size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified.

M&L for filling back hollow of steel frames with PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate complete all as specified.

Supplying & fixing solid PVC door frames of sizes 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS Square tube complete all specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelam PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , both side prelam PVC sheet used instead of plain colour PVC sheet. Stile and rail feathered at edges paneling of prelam solid sheets 10 mm thick to be fitted in the MS frame welded, sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement complete all as specified in SSR Part -II.

S&F factory made 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type, both faces covered with decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of 2nd class HW wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed

S&F stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperture and fixed fixed along with aluminium anodised mesh of size 10x10x1.0 mmthick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and directed.

S&F factory made 35 mm thick 2nd class hardwood, Plain, framed, panelled shutters (any number of panels), in with panels of timber flat on both sides (feather edged), of 12 mm BWP commercial ply with commercial veneering on both faces; supplied and fitted to chowkats

Supply and fixing Door closer hydraulically regulated, designation No. 2,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator shutters, sliding / casement type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, guide channel two track anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) including 5.0 mm thick glazing & taking down existing window / ventilator complete all as specified

Material and labour for preparation of surfaces of any description not other describe ver 10cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer, including preparation of new wooden surface.

Material and labour for surfaces of any description not other describe ver 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide, including preparation of new steel surface.

Supply and fixing Mild steel butt hinges medium weight, cold rolled, 100mm, ISI marked, fixed with stainless steel screws complete all as specified and directed.

Supply and fixing 150mm long aluminium anodised barrel tower bolt, extruded section,fixed with stainless steel screws complete all as specified and directed.

Supply and fixing 200mm long aluminium anodised barrel tower bolt, extruded section,fixed with stainless steel screws complete all as specified and directed.

Supply and fixing 200 mm size extruded aluminium aluminium alloy handles fabricated type, anodised fixed with stainless steel screws complete all as specified and directed.

Supply and fixing 250 mm aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed with stainless steel screws complete all as specified and directed.

Supply and fixing in repairs floor door stopper 100 mm size of aluminium alloy body and anodized.

Supply and fixing in repairs door closer hydraulically regulated, designation No. 2,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.50 Sqm in each panes complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds glazing with putty or fixed with beads and S&F 3.0mm thick frosted glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes complete all as specified and directed.

M&L for rectangular aluminium hollow section of size 101.6 x 44x2mm thick as in partition (including fixing with nut and bolt in floor and wall by drilling holes), powder coated of approved colour for both vertical and horizontal member including 5 mm thick glass, 12mm thick particle board prelaminated on both side, aluminium legs, aluminium glazing channel, rubber beading as required complete (Size of panel nexc 01 Sqm each) incl taking down old partition all as directed.

All as per itemNo. 28 above but as in door, powder coated, approved colour, including 5 mm thick glass, 12mm thick particle board prelaminted on both side, rubber beading, aluminium glazing channels, two Nos handle D type 250 mm long, one no 200mm aluminium powder coated barrel tower bolt of extruded section, 100mm size brass mortice lock, 4 levers with two keys and one floor door spring per leaf incl taking down old door complete all as specified and directed.

S & F 6 mm thick Aluminium grill of make "Deco grill" ,DG - 104 model or any other equivalent approved make fitted in to suitable Aluminium channel , 'F' section and fixed to windows/ ventilators including making provision for opening of window / ventilator and taking down existing grill complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes of windows as per instructions of manufacturers, properly rolled on glass panes without any wrinkle complete all as specified.

S&F in repairs venetian blinds (vertical type) of 100mm wide straps with all fittings (to be matched with existing pattern) complete all as directed.

S&F solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including taking down existing boarding complete all as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) (EWC), white including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device and fixing bolts complete all as specified.

S&F in repairs vitreous china squatting pan "Orissa" pattern of size 580x440mm white with integral foot rest including provision of P or S trap including connection to flushing pipe and making good to floor complete all as specified. Note :- Demolition of tiles/concrete and concreting required for setting trap and making good to floor shall be deemed to included in the quoted rate

S&F in repairs vitreous china wash basin, white, flat back, size 550 X 400 mm incl supply only 32 mm dia CP waste coupling, incl brackets complete all as specified.

S&F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as directed

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repair CP stainless steel 32mm dia waste coupling suitable for WHB complete all as specified and directed.

S&F in repairs 32mm dia PVC flexible waste pipe of length exceeding 60cm but not exceeding 90cm with connector suitable to connect the pipes with waste fitting/ coupling of WHB/ sink/ urinal complete all as specified.

S&F in repairs Vitreous China urinal, half stall type of size 46x30x71 cm, coloured complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1`:2 , securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including CP brass urinal spreader and CP connection of suitable length as per manufacturers instructions including necessary connection to flush pipe and 32 mm dia waste pipe complete all as specified and directed. Make :Cat part No 96010 of Hind ware or equivalent in Perry ware

S&F in repairs Urinal sensor of ivory colour complete all as directed. Make:- Hind ware cat No 6007 or equivalent.

Taking up or down steel tubing and connections and supply and fixing 15mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

Taking up or down steel tubing and connections and supply and fixing 20mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

Taking up or down steel tubing and connections and supply and fixing 25mm dia GI tubing, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as directed.

S&F in repairs 15 mm dia Bib taps, cast copper alloy chromium plated with capstone head , screwed down, screwed for iron pipe complete all as directed.

S&F in repairs 15 mm dia two way Bib taps, cast copper alloy chromium plated with capstone head , screwed down, screwed for iron pipe complete all as directed.

S&F in repair stop valve / angle cock fancy type cast copper alloy chromium plated with capstan head screwed down for 15 mm dia iron pipe complete all as specified.

S&F in repair push type angle cock fancy type cast copper alloy chromium plated with capstan head screwed down for 15 mm dia iron pipe complete all as specified.

S&F in repairs 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with long screwed shank and fly nuts, screwed for iron pipe complete all as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm long complete all as directed

S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 600 mm long between flanges complete all as directed

S&F in repairs ball brass valves of 20 mm dia, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as directed.

S & F in repairs 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as directed.

S&F in repairs vitreous china wash basin, white, oval shape under counter incl 15 mm dia pillar tap, 32 mm dia CP waste coupling, PVC waste pipe complete all as specified.

Taking down existing roof treatment of any description, any position with bituminous felt including plaster/loose concrete and removing rubbish outside MOD land and roughening the surfaces of old concrete by picking, scraping, cleaning and washing down with water to remove all dust etc complete specified and directed by Engineer-in-charge.

M&L for roof padding concrete in B0 (1:2:4) using 12.5mm aggregate for leveling including demolition of existing concrete complete all as specified.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3

M&L for rendering 10mm thick in CM 1:3 over concrete surfaces on RCC roof slab and parapets mixed with WPC @3% by weight of cement shall be carried out complete all as specified and directed by Engr-in-Charge. Note : WPC will be measured under separate item of this schedule.

M&L for brushing neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified.

M&L for applying one coat of bituminous primer conforming to IS-3384 @ 0.3 Ltr per sqm complete all as specified.

M&L for Laying of APP based membrane 3.50 kg/ sqm and minimum 3 mm thickness complete all as specified.

M&L for Applying one coat bitumen grade 85/25 @ 1.2 Kg/Sqm complete all as specified.

M&L for Applying two coat of aluminium paint @ 100 ml/sqm complete all as specified.

Supply only intergal water proofing compound complete all as specified

S&F in repairs Multicolor double layered black out fabric roller zebra blinds horizontal type including hanging mechanism water resistant, UV protection for window etc fixed complete all as directed. Make: Vista/Levador/Amar

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Material and labour 10mm thick rendering on other than faces of brick work or concrete surface in cm 1:6 to be finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of weather proof antifungal exterior paint as per manufacturers instructions over a coat of true care exterior wall primer over two coats of external birla putty 1.5mm thick each layer to level the surface and finished smooth with emery paper No.180 followed by emery paper No.320 or 400 and wipe it clean complete all as specified and as directed . Make:- APEX ULTIMA of ASIAN PAINT/ WEATHER COAT SMOOTH(BERGER PAINTS)/ WEATHER SHIELD MAX EXTERIOR ACRYLIC(DULUX)

M&L for false ceiling with light weight 19mm thick mineral Armstrong tiles of size 595x595mm suspended on silhouette profile suspension system of grid made from hot dipped GI steel section notary stitched double webbed powder coated white consisting of main T- runner 42mmx14mm and 0.30mm thick and cross T of size 33mmx14mm and 0.30mm thick placed at 60cm centre having width of flange 14mm with a 6mm reveal profile (Blace). The grid system to be rested on the periphery wall/partitions on a W-profile wall section made of pre-coated galvanized steel of dimension 3.0mm long x (15mm+10mm)x22.5mm and laying false ceiling for services like diffusers grill including cutting, making opening for services like diffusers grill light fitting, fixture smoke detectors etc. Wherever required main T-runner to be suspended from ceiling using GI suffix cleats of size 25mm x 35mm x 1.6mm fixed to ceiling with 6mm dia GI hangers and 50mm long dash fastener, 4mm dia GI adjustable rods with galvanized level adjustment clips spaced as required, at all height incluing taking down old false ceiling complete all as directed.

S&F vitrified tiles 10mm thick light shade (Square/rectangular) polished area of each tile not exceeding 0.36 sqm in flooring set and jointed in neat cement slurry and pointed in coloured cement to match with existing floor over and including 15 mm thick screed bed in cement mortar (1:6), including dismantling of old floor tile along with screed bed complete all as directed.

All as per ser item No. 72 above here-in-before but on vertical surfaces such as skirting over 10 mm thick backing coat in CM 1:4 on fair faces of brick/concrete surfaces including dismantling old wall tiles along with backing coat complete all as directed.

M&L for 18 mm thick granite (of any type) machine cut, bedded andjointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm screed in CM 1:6 including dismantling existing stone complete all as directed.

M&L Non-skid coloured matt finish ceramic tiles 7 to 8 mm thick (square /rectangular ) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floor etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over a screed bed 15 mm thick in CM 1:6 incl dismantling old tiles complete all as specified and directed.

All as per ser item No. 75 above here-in-before but on vertical surfaces such as skirting over 10 mm thick backing coat in CM 1:4 on fair faces of brick/concrete surfaces including dismantling old wall tiles along with backing coat complete all as directed.

M&L Non-skid coloured ceramic tiles 7 to 8 mm thick (square /rectangular ) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floor etc . set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over a screed bed 20 mm thick in CM 1:6 incl dismantling old tiles complete all as specified and directed.

M&L Glazed ceramic coloured tiles as in vertical surfaces 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm the backing coat of cement mortar 1:4 incl dismantling old tiles all as specified and directed.

M & L for preparation of old plastered surfaces of wall and applying two coats of exterior emulsion paint of Apex ultima make complete all as directed.

M&L for preparation of old painted steel/iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L for preparation of old painted wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M & L for preparation of old plastered surfaces of wall and applying two coats of oil bound distemper complete all as directed.

M & L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as directed.

M&L for preparation of old surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint complete all as directed.

M & L for preparation of old plastered surfaces of wall and applying one coat of exterior emulsion paint of Apex ultima make complete all as directed.

S&F 12mm thick Toughened frosted/tinted glass as in aluminium partitions/doors including necessary rubber neoprene packing and fixing with old aluminium snap beadings and screws, fixed in position complete in all respect incl taking down broken glass of any description and in any position complete all as specified. Make : Modiguard/ saint Goblin / Kohinoor

S&F 2 mm thick powder coated stainless steel 304 grade name plate of size 150 x 150 mm with engraved letters ( Size of letter exc 15 cm but nexc 25 cm and Qty nexc 05 nos, as per requirement at site) and fixed with SS studs on walls including dismantling old existing name plate complete all as specified and directed

PAVAN ENTERPRISES