Repair and maint of steel furniture incl painting at OAF, Manasbal, Haft Chinar and Sonamarg under GE 970 EWS

Amount

M&L for removing denting wherever required from the following furniture articles, making the surface smooth after removing old paint wherever poped out, removing existing treatment completely without damaging the adjuscent areas, clean throughly to remove all dust/oily spot/ dirt interior and exterior, filling putty at required places, scrubbing with emery paper to make the surface smooth and painting with two coats in the new and repaired parts and single coat in remaining portion in the required colour of 1st quality synthetic enamel paint using spray paint mechine/ brush as required complete all as specified and directed.

Almirah large steel/ Almirah large steel with locker ( No. FD-1031 & FD/E6/MAP/18 )

Almirah Medium steel (FD-1032)

Locker bed side steel (FD-257/1029)

Rack steel of different sizes (FD-81(M)/ FD-1023)

Table office officer steel (FD-84/ FD-1002/ FD- 1003)

Table office clerk steel (FD-84/ FD-1004)

Table 3’ x 2’ without drawer (FD-1007)

Table 3’ x 2’ with drawer (FD-1008)

Table 3' X 3' Steel (FD-1009)

Book case steel/ Book shelf (FD-1028/ 69(M))

Chair CB Steel with arms (FD- 75(M))

Chair CB Steel without arms (FD- 75(M))

Form with back (FD- 78(M))

Form without back (FD- 77(M))

Teapoy Verandha ( FD-255 & FD/E6/MAP/17)

Rack Shoe Steel ( FD/E6/MAP/02 (R) )

Ladder for loft (FD 238/44(M))

Rack side steel 3/4 spaces (FD-1023)

Trestle store room Steel (FD-86(M) / 1043)

Stool Steel 2'/ 5' (FD- 81(M))

S&F in replacement of unserviceable lock of following furniture articles with new GI lock 4 lever with duplicate keys incuding removal of unsv one and fixing with machine screws of required size, complete all as specified and directed.

Almirah large steel/ Almirah large steel with locker (FD-67/ FD-1031)

Almirah medium steel ( FD-67/ FD-1032)

Book case steel ( No FD-1028)

Table office officer steel (FD-84/ FD-1002/ FD- 1003)

Table office clerk steel (FD-84/ FD-1004)

Table 3’ x 2’ with drawer (FD-1008)

M&L for replacement of handle of following articles with new handle of mild steel/ GI heavy duty to be fixed with machine screw/ nuts/ bolts of required size complete all as specified and directed.

Almirah large steel/ Almirah large steel with locker (FD-67/ FD-1031)

Almirah medium steel (FD-67/ FD-1032)

Locker bed side steel (FD-257/1029 )

Book case steel (FD-1028)

S&F of MS hasp and staple/ MS Tower bolt of Locker bedside steel with new one to be fixed with MS revit/ nuts/ bolts/ welding as required complete all as specified and directed. (FD-257/1029 )

S&F cromium plated steel conduit pipe of 20mm dia with 1.6mm wall thickness with sockets at both ends for Locker bedside steel complete all as per drawingcomplete all as specified and directed.Drawing No (FD-257/1029).

S&F of clips for fixing of shelves, including removing unserviceable clips from Almirah steel of any size or type complete all as per drawing complete all as specified and directed.Drawing No (FD-257/1029).

M&L for weldingon various parts of steel furniture items including preparation of surface and removing the unwanted welding spots complete all as specified and directed.

M&L for removing existing unserviceable legs of following furniture articles and supply and fixing new legs as existing made of 1 mm thick MS sheet welded as per best trade practice and painting with one coat of metal primer complete all as specified and directed.

Almirah large steel/ Almirah large steel with locker (FD-1031 & FD/E6/MAP/18 )

Almirah medium steel (FD-1032)

Locker bed side steel (FD-257/1029)

M&L for removing 3 way locking device and chakar (excluding lock and handle) from the following furniture articles and supply & replacement with new 3 way locking device and painted with one coat of metal primer, complete all as specified and directed.

Almirah large steel/ Almirah large steel with locker (FD-1031 & FD/E6/MAP/18 )

Almirah medium steel (FD-1032)

M&L for replacement of broken/ damaged shelf in the following furniture articles made out of 20 gauge MS sheet made to shape as per existing duly painted with a coat of primer complete all as specified and directed.

Almirah large steel/ Almirah large steel with locker (FD-1031 & FD/E6/MAP/18 )

Almirah Medium steel (FD-1032)

M&L for replacement of broken/ damaged door in the following furniture articles made out of 20 gauge MS sheet with hinges made to shape as per existing duly painted with a coat of primer complete all as specified and directed.

Almirah large steel/ Almirah large steel with locker (FD-1031 & FD/E6/MAP/18 )

Almirah Medium steel (FD-1032)

Locker steel (FD-257/1029/ 127 (M) )

M&L for replacement of old unserviceable drawers with new drawer made out of 20 gauge MS sheet made to shape as per duly painted with a coat of primer complete all as specified and directed.

Table office clerk steel (FD-1004)

Table office officer steel (FD-1002/1003)

Table 3’ x 2’ with drawer (FD-1008)

M&L for replacement of old unserviceable PVC covering on recessed handle of drawers of tables with new one as per complete all as specified and directed.

M&L for replacement of old unserviceable legs with new legs made with 25 mm square MSl tube of wall thickness 1.6mm as per duly painted with a coat of metal primer complete all as specified and directed.

S&F in replacement rubber shoes of size 25 mm X 25 mm to the legs of various types of furniture items after removing the existing old one complete all as specified and directed.

S&F top made of 17/ 18 mm thick both side pre laminated exterior grade MDF board of required colour/ pattern provided with 4 mm thick TW beading all around (the beading should be fixed with nails and fevicol) for various type of tables in replacement of existing u/s top of any type and size complete all as specified and directed. Make : Action Tesa/ Novopan/ Archidply/ Greenply

CHAIR CB STEEL WITH/ WITHOUT ARMS (FD-75(M)): Removing the following broken/ damaged parts from chair tubular steel with/ without arms and replacing the same with new one complete all as specified and directed:

New Seat frame of chair CB steel with arms made of well seasoned 1st class hardwood duly caning with half round PVC cane 2mm wide 0.4mm thick, border with 3mm wide 0.5mm thick in Godrej pattern duly painted with two coats of black synthetic enamel paint in glossy finish over a coat of pink primer and fixed to frame with 04 Nos machine nuts and bolts of appropriate size with washer complete.

All as per Srl item No. 17.01 here-in-before but back of Chair CB Steel with arms.

All as per Srl item No. 17.01 here-in-before but seat of Chair CB Steel without arms.

All as per Srl item No. 17.01 here-in-before but back of Chair CB Steel without arms.

New Arms of chair CB steel with arms made of well seasoned 1st class hard wood and duly painted with two coats of black synthetic enamel paint in glossy finish over a coat of pink primer and fixed to frame with wood screw of appropriate size complete all as specified and directed.

PVC toes to chair CB steel with/ without arms of standard approved qualitycomplete all as specified and directed.

PVC plug to the top of chairs CB steel with /without arms of standard approved qualitycomplete all as specified and directed.

MS strip of existing size 4mm thick by welding to the existing frame below the seat of chair CB steelcomplete all as specified and directed.

FORM WITH BACK (FD-78(M)):

S&F new seat made out of 1st class teak wood plank 25 mm thick of size 1800 mm long x 255 mm wide with nut and bolt including polishing the plank with french polish and removing of old unserviceable seat plank from form with back complete all as per drawingcomplete all as specified and directed.

S&F new back rest made out of 1st class teak wood plank 25 mm thick of size 1800mm long x 150 mm wide with nut and bolt including including polishing the plank with french polish and removing of old unserviceable back plank from form with back complete all as per drawing complete all as specified and directed.

FORM WITH OUT BACK (FD-77(M)):

S&F new seat made out of 1st class teak wood plank 25 mm thick of size 1525 mm long x 255 mm wide with nut and bolt including polishing the plank with french polish and removing of old unserviceable seat plak from form without back complete all as per drawingcomplete all as specified and directed.

CHAIR REVOLVING COMPUTER (FD/E6/MAP/01 & TP ) Removing the following broken/ damaged parts from chair revolving computer and replacing the same with new one complete all as specified in the drawingcomplete all as specified and directed.

Seat made of 75 mm thick foam with new tapestry cloth cover of good quality of cost not less than `. 250/- per metre including 12 mm thick ply seat bottom complete. The bottom part of the seat should be covered with black colour nylon cloth. Colour and pattern of tapestry cloth as approved by GE, complete all as specified and directed.

Back made of 75 mm thick foam with new tapestry cloth cover of good quality of cost not less than `. 250/- per metre including 12mm thick ply back support complete. The joints of tapestry cloth should be provided with rubber/ nylon lipping as directed. Colour and pattern of tapestry cloth as approved by GE, complete all as specified and directed.

Removing old soiled/ torn seat and back cover only and S&F new seat and back cover as per srl item no. 17.01 and 17.02 above complete as directed.

Hydraulic system heavy duty with PVC cover.

Caster wheels.

Base chromium plated.

Arms as per existing.

Tilt mechanism.

CHAIR VERANDAH ( NO FD-256/ FD/MAP-II/06)

Materials and labour for removal of old paint and painting the same with two coats of white synthetic enamel paint including the preparation of the surface complete all as specified and directed.

M&L for 20mm dia 16 Guage MS conduit pipe for left or right side frame (consisting front & rear leg portion) duly welded to the seat frame of chair verandah and also to 10 mm dia MS rod in front leg complete duly painted with a coat of metal primer all as per drawingcomplete all as specified and directed.

M&L for recanning with new plastic cane 4mm wide half round of best quality (Mat pattern) duly approved in white colour on Chair Verandah including removing of old unserviceable cane/newarcomplete all as specified and directed.

New PVC seat and back 4 mm thick with weight not less than 1.85 kg and grooves 90X10 mm 10 Nos on seat and bac, complete all as specified and directed. Make: AMCO/CELLO/MILTON/HARMONY

S&F new hard rubber/ PVC shoes (Set of 04 Nos) of approved quality including removing of old unserviceable rubber shoes of verandah chair complete all as per drawing complete all as specified and directed.

CHAIR WRITING (FD/E6/MAP/12) Supply and fixing in replacement of following unserviceable parts of chair writingcomplete all as specified and directed.

Seat made of 75 mm thick foam with new tapestry cloth cover of good quality of cost not less than `. 250/- per metre including 12 mm thick ply seat bottom complete. The bottom part of the seat should be covered with black colour nylon cloth. Colour and pattern of tapestry cloth as approved by GE, complete all as specified and directed.

Back made of 75 mm thick foam with new tapestry cloth cover of good quality of cost not less than `. 250/- per metre including 12 mm thick ply back support complete. The joints of tapestry cloth should be provided with rubber/ nylon beading as directed. Colour and pattern of tapestry cloth as approved by GE, complete all as specified and directed.

Removing old soiled/ torn seat and back cover only and S&F new seat and back cover as per srl item No. 22.01 and 22.02 above, complete all as specified and directed.

S&F MS strip of existing size 4mm thick by welding to the existing frame below the seat of chair writing including provision of hole of fixing the seat by screwing duly painted with acoat of metal primer, complete all as specified and directed.

Arms as per existing.

M&L for painting to frame with one coat of black synthetic enamel paint including preparation of surface, complete all as specified and directed.

Rubber/ PVC shoes as per existing.

CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05)

Materials and labour for removal of old paint and painting with two coats of black synthetic enamel paint including preparing the surface complete all as specified and directed.

Supply & fixing in replacement of unserviceable seat of chair school with hand board all as shown in drawing, complete all as specified and directed.

Supply and fixing shoe for chair school with hand board all as specified and directed.

S&F hand board made of 18 mm thick both side pre laminated particle board provided with 4 mm thick TW beading all around (the beading should be fixed with nails and fevicol) in replacement of existing u/s hand board with tightening screws complete all as specified and directed.

BED HARD IRON (FD/E6/MAP/08)

Materials and labour for complete removal of existing paint and applying two coats of black synthetic enamel paint over a coat of primer complete all as specified and directed.

Material and labour for removing existing unserviceable ply of bed hard top and supply and fixing new ply of 12mm thick, BWR exterior grade, 7 ply complete all as specified and directed.

Material and labour for removing existing unserviceable headboard and supply and fixing with new one made of 18mm both side prelaminated particle board, complete all as specified and directed.

Material and labour for removing existing unserviceable footboard and supply and fixing with new one made of 18mm both side prelaminated particle board, complete all as specified and directed.

S&F shoe for legs.

CHARPOY WITH HARD TOP (FD/ MAP-II/ 01)

Materials and labour for complete removal of existing paint and applying two coats of black synthetic enamel paint over a coat of primer complete all as specified and directed.

Material and labour for removing existing unserviceable ply and fixing new ply of 12mm thick, BWR exterior grade, 7 ply complete all as specified and directed.

CHARPOY FOLDING IP WITH HARD TOP (FD- 388(R)) M&L for taking out old unsv components as given below from Charpoy Folding and S & F new components as per shape and size as existing all as specified and shown on drawing , complete all as specified and directed.

New top made out of ply wood BWR commercial 12 mm thick of approved make size as existing in two piece including fixing to frame with 08 Nos flat head nut and bolts .

New side legs made of 25 dia 16 gauge MS conduit pipe including rivets and MS flats.

New middle legs made of 25 dia 16 gauge MS conduit pipe including rivets and MS flats.

New Stiffner made of 25 dia 16 gauge MS conduit pipe.

New rubber/ PVC shoes of best quality

Painting on entire frame of Charpoy folding after preparing the surface after removing rust, old paint, dirt etc. with synthetic enamel paint of colour as directed, complete all as specified and directed.

BOOK CASE STEEL (FD-1028)

M&L for replacement of unserviceable glass with 4 mm thick plain sheet glass complete all as specified and directed.

M&L fixing of loose shutters in existing position with appropriate size clips and sliding roller as existing and making the sliding shutter for easy moving, complete all as specified and directed.

CHARPOY GI WITH PLY TOP (FD-220)

Removing unserviceable long rail having both threaded broken ends ,supply and fixing new long rail of GI tubing 32 mm bore medium grade (ISI marked) duly threaded both ends all as specified and shown on drawing, complete all as specified and directed.

Removing unserviceable short rail having both threaded broken ends and supplying and fixing short rails converted out of broken long rail obtained from Serial item No. 1.00 (2 Nos short rails from One long rail) here-in-above duly threading both ends of short rails and fixing in position, complete all as per drawing, complete all as specified and directed.

Removing unserviceable legs and replacing it with those made out of unserviceable short rail obtained from Serial item No. 2.00 here-in-above by proper threading end fixing in position, complete all as per drawing , complete all as specified and directed.

Removing of unserviceable galvanized iron elbow three ways 32 mm bore from GI charpoy with nylon newar, supply and assembling new elbows three way galvanized iron for 32 mm bore medium grade, ISI marked, complete all as per drawing, complete all as specified and directed.

Removing of unserviceable check nut galvanized iron 32 mm dia and supplying and assembling new check nuts of 32 mm dia, ISI marked, complete all as per drawing, complete all as specified and directed.

Supply & fixing stiffener made of 32mm x 5mm flat iron in replacement of unserviceable stiffner with proper welding process, duly painted with a coat of metal primer, complete all as specified and directed.

Supply and fixing in replacement of 12 mm thick 7 ply 1980 x 900 mm long, BWR grade ISI marked . The ply shall be fixed to frame with flat head MS nut and bolt (Total 13 Nos per charpoy) after drilling hole in ply and frame of charpoy, if required. The corners of ply shall be made in to curve. Entire frame of charpoy except stiffners shall be painted with two coats of aluminum paint (1st grade quality) and stiffner shall be painted with black paint over a coat of metal primer. The work also include tightening of loose check nuts, elbows, long rails, short rails, legs etc. to make charpoy firm. Rest all specified in the and , complete all as specified and directed. Make of ply: Century/ Duro/ National/ Kitply/ Archid/ Green Ply.

Table Dining ORs (FD- 165(M)) Taking out old unsv parts as given below from Table Dining ORs and S & F new parts in replacement as per Shape and size as exiisting. All Steel parts made out of 25 mm square tube 1.6 mm wall thickness duly painted with a coat of metal primer. Rest all as specified and shown on drawing, complete all as specified and directed.

New legs.

New top long rails/ Stiffner.

New Hard rubber shoes for legs.

M & L painting to the frame with one coat of synthetic enamel OG paint after preparation of steel surface, complete all as specified and directed.

New top made out of 18 mm thick block board covered on top with 22 guage aluminium sheet, and fixed to frame with steel screw of appropriate size, complete all as specified and directed.

Double Bunk Charpoy GI pipe (FD-CESZ/SK-203/91) : Taking out old unsv parts as given below from Double Bunk Charpoy GI pipe and S & F new parts in replacement as per Shape and size as existing all as specified and shown on drawing , complete all as specified and directed.

New GI pipe long rail 32mm dia medium grade ISI marked with both ends double hole including removing of unserviceable broken long rails from charpoy, complete all as specified and directed.

New GI elbow 32mm dia ISI marked matching with the existing shape & size including removing of unserviceable elbow from charpoy, complete all as specified and directed.

New MS algle bracket 35x35x5mm and 100 mm long with hole welded to pipe stand matching with the existing shape & size. Bracket shall be painted with two coats of black paint over a coat of red oxide primer, complete all as specified and directed.

New GI nut and bolt with washer counter sunk 10 mm dia for joint MS angle bracket 35x35x5mm x100 mm long and long rails matching with the existing shape & size as per drawing, complete all as specified and directed.

New commercial plywood top 12mm thick grade BWR commercial and fixing with nut and bolt of appropriate size including cutting / welding the stiffener and angle of size 35x35x5mm and tightening of frame as per ground requirement including removing of old unserviceable GI Elbow & plywood top Charpoy, complete all as specified and directed.

Notes :- An amount of ` 41,945.00 on account of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum

M/s Bashir Enterprises (BID ID -3201968)

M/S HARJEET ENTERPRISES (BID ID -3196171)

M/S B A Traders (BID ID -3196537)

DUKE CONSTRUCTION (BID ID -3193395)

MEHAK STEEL INDUSTRIES (BID ID -3196434)