SPECIAL REPAIRS TO BALANCE PORTION OF FOOTPATH FROM NECKLACE AREA LAST OUT GATE TO RAMNAGAR COLONY AT DRDO ESTATE UNDER GE(I) RnD PASHAN, PUNE

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, Complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above GL) complete all as specified and directed by Engineer-in-Charge.

Demolition of brickwork or stone/ boulder masonry, pcc block masonary built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc. complete all as specified and as directed

Material and labour for Pre-cast cement concrete block masonry 1:3:6, type C1 (using 20 mm graded crushed stone aggregate)with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6), complete all as specified and directed

Taking down cement plaster on brick or stone or concrete surface including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finished the surface even & fair without using extra cement complete all as specified and directed.

Surface excavation not exceeding 30 cm in depth but exceeding 1.5 metre in width as well as 10 sqm on plan including getting out all kinds of soil and disposal of excavated earth upto 50 Metre and lift upto 1.5 Metre complete all as specified and directed by Engineer-in- Charge.

Material and labour for broken stone hardcore of gauge exc. 63 mm but n exc 100mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for PCC 1 : 4 : 8 type D 2, (using 40 mm graded crushed stone aggregate) for foundation filling and mass concrete, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for plain cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) as in coping, surface channel and drains etc including necessary form work complete all as specified and directed.

Demolition of kerb stones set and pointed in cement mortar complete all as specified and directed.

Material and labour for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening for wherever required complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping out extra sand complete all as specified and directed.

Material and labour for complete removal of existing surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge.

Material and labour for 200 mm internal diameter Reinforced concrete pipes, class NP2, laid and jointed complete with collars, laid in trenches on concrete bed or directly on hard ground complete all as specified and directed. Note : Concrete bed and excavation if required shall be measured and paid separately.

Supply and Fix PVC (SWR) pipes single socketed 110 mm bore in any length with rubber ring joints fixed to brick / stone walls as in drain, floor etc complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 metre and making good surface in hard/dense soil complete all as specified and directed.

Supply and fix metal tubular dealineator made out of ABS round body fitted with 02 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by Engr-in-charge.

Material and Labour for providing and fixing stainless steel (Grade 304) newel balusters of approved height and bore, made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete all as specified and directed.

Material and Labour for Rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for Rendering 20mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in cement mortar 1:4 finished even and smooth without using extra cement, Complete all as specified and as directed by Engineer-in-Charge.

VENKATESHWARA ENTERPRISES (BID ID -3188571)

OM GANESH CONSTRUCTION (BID ID -3189016)

AJAY ENTERPRISES (BID ID -3192570)

Baljeet Singh Choudhari (BID ID -3191082)

Sunil Constructions (BID ID -3192165)

VIRENDRA FABRICATORS (BID ID -3191452)

S.K.HARAL (BID ID -3191320)

M/S NILESH BUILDERS (BID ID -3190972)

M/S SAMRUDHI CONSTRUCTION (BID ID -3190871)

sanjay m. suryawanshi (BID ID -3191405)