Loading…
Loading…
Tender Value
₹9.5 L
EMD Value
₹19,020
Closing Date
31 Aug 2026, 4:00 pm
EE(BM-PK)
Room no-1615 16th floor Palika Kendra New Delhi
AR and MO building in BMPK Division during 2026-27 SH Repair and maintenance of basement flooring of Mayur Bhawan
2026_NDMC_297426_1
NITNO.47/EE(BM-PK)/2026-27
Open Tender
Civil Works - Buildings
Works
30 days
NDMC area
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹19,020
21 Aug 2026
21 Aug 2026
31 Aug 2026
21 Aug 2026
31 Aug 2026
21 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | 6 | Square metre | 11,579.3 | ₹69,475.8 |
| 2 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 1,476 | Kilogram | 135.33 | ₹1,99,747.08 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 11 | Cubic metre | 6,895.19 | ₹75,847.09 |
| 4 | Providing and placing in position 50 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. | 197 | each | 2,327.46 | ₹4,58,509.62 |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture | 340 | Square metre | 229.01 | ₹77,863.4 |
| 6 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per
direction of Engineer-in-Charge. 14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) | 55 | Square metre | 554.08 | ₹30,474.4 |
| 7 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) | 108 | Square metre | 361.71 | ₹39,064.68 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.14 MB
BOQ_396195.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].