SPECIAL REPAIR TO P 27 and P 28 ASSAYE BLDG AT MUMBAI UNDER GE WEST COLABA, Mumbai

Amount

PART I :- Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engr-in-Charge.

M & L for double/ultra charged vitrified tiles, 8 to 10mm thick, (square/ rectangular) polished, area of each tiles not exc exceeding 0.42 Sqm , in flooring, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somani Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

M & L for double/ultra charged vitrified tiles, 8 to 10mm thick, (square/ rectangular) polished, area of each tiles not exc exceeding 0.42 Sqm , on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including backing coat 10 mm in CM (1:4) complete all as specified and as directed by Engr-in-Charge. Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

M & L for non skid coloured ceramic tiles, 7 to 8mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in CM (1:6) complete all as specified and as directed by Engr-in-Charge. Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

M & L for glazed coloured ceramic tiles, 1st quality of size 450 x 300 x 7mm thick (or nearest size) on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in colour cement to match including backing coat 10 mm in CM (1:4) complete all as specified and as directed by Engr-in-Charge. Make:M/s H R Johnson/M/s Orient Bell Tiles/M/s Kajaria/M/s Somany Tiles Ltd/M/s Nitco tiles/M/s Swastik Tiles

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness , including framed structure and cover fillets complete all as specified and as directed by Engr-in-Charge

M & L for anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1285 including all ceiling cleats, 4 mm dia GI wire suspender with necessary main tee 35.00 x 23.50 x 1.50mm , cross tee and wall angle of size 23.50 x 23.50 x 1.5 mm , with 605 x 605 mm grid system including PVC coated gypsum false ceiling board 600 x 600 x 8mm thick, front side vinyl laminated PVC and back side aluminium foil with all connected accessories, suitably placed in false ceiling grid as per manufacture instruction complete all as specified and as directed by Engr-in-Charge.

S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing in SSR Part I and all as specified and as directed by Engr-in-Charge.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as per specifications and drawing in SSR Part I and all as specified and as directed by Engr-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness or similar pattern as in roof /sun shade coverings complete all as specified and as directed by Engr-in-Charge.

Dismantling timber as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position, in unframed work complete all as specified and as directed by Engr-in-Charge.

S & F Rolled steel sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc, conforming to Fe 410 W, Gde E- 250, Quality A complete all as specified and as directed by Engineer-in-Charge.

M & L for pre- painted galvalume aluminum zinc coating GI based corrgated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa as in sun shades, roof covering/cladding to wall, fixed with self tapping screws as specified and as directd by the Engineer - in - Charge.

M & L for Cutting grooves in brickwall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1;3 and making good after fixing roof sheets in grooves complete all as specified and as directed by Engr-in-Charge.

S & F two coats of waterproofing & protective coating on wall/floors of brick/concrete/stone masonry surfaces as per manufacturer's instructions including scaffolding complete all as specified and as directed by Engr-in-Charge. Make- Smart Care Damp Block 2K of Asian Paints/Pidifin 2K of M/s Dr Fixit

Supply only water proofing compound, ISI marked complete all as specified and as directed by Engr-in-Charge.

Taking down chowkats or frame with shutters, exc 1.5 sqm but n exc 4.00 sqm each (without taking off shutters from the frames) including all fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engr-in-Charge

Taking down chowkats or frame with shutters, n exc 1.5 sqm each (without taking off shutters from the frames) including all fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engr-in-Charge

Taking down shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm each including all fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engr-in-Charge

S & F plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good frame in cement concrete complete all as specified and as directed by Engineer-in-Charge.

S & F Flush shutters, 40mm thick, solid core construction with Particle board core and plywood face panels, both faces are covered with decorative face veneer with lipping/frame to match complete all as specified and as directed by Engr-in-Charge.

S & F Door closer aluminium body ( extruded section), hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engr-in-Charge.

S & F Cylindrical lock with brass knobs made from high grade brass with easy push button facility for locking from inside suitable for flush doors complete all as specified and as directed by Engr-in-Charge. Make- Godrej Product code 5807 or equivalent as approved by GE.

M & L for French polishing on new surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler with two or more coats complete all as specified and as directed by Engr-in-Charge.

M & L for French polishing on old surfaces of any description, width or girth including cleaning and preparing the surface with one or more coats complete all as specified and as directed by Engr-in-Charge.

S & F aluminium anodised barrel tower bolt of extruded section size 200mm complete all as specified and as directed by Engr-in-Charge.

S & F aluminum anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy 300mm long, ISI marked complete all as specified and as directed by Engr-in-Charge.

S & F extruded aluminium alloy handles fabricated types, anodised, of size 150 mm long complete all as specified and as directed by Engr-in-Charge

S & F stainless steel butt hinges fixed with cadmium plated screws heavy weight of size 100 mm complete all as specified and as directed by Engr-in-Charge.

M & L for 15mm thick plaster in CM (1:4) in two coats (10mm+5mm) on fair faces of the brick or concrete surfaces of wall using water proofing compound @ 3% by the weight of cement, mixed with both coats or as per manufacturer instructions and finished the surface even and smooth without using extra cement including taking down cement plaster and removing debris out side MD land complete all as specified and as directed by Engr-in-Charge. Note :- WPC will be measured & paid seperately for supply only

M & L for rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces of wall and finished even and smooth without using extra cement including taking down cement plaster and removing debris out side MD land complete all as specified and as directed by Engr-in-Charge.

M & L for rendering 5 mm thick in CM 1:3 on any faces of brick work or concrete surfaces of ceiling and finished even and smooth without using extra cement including taking down cement plaster and removing debris out side MD land complete all as specified and as directed by Engr-in-Charge.

M & L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engineer in Charge. Make : Royale Luxury Emulsion Asian Paint / Silk Glamor luxury emulsion Berger/ Impressions 24 carat Nerolac

M & L for preparation of old plastered or un plastered distempered surface of wall including complete removal of existing treatment and applying two coats of distemper oil emulsion over one coat of alkali resistent primer complete all as specified and as directed by Engr-in-Charge.

M & L for preparing new plastered surfaces of wall and applying two coats of Acrylic weather proof coat 100 % exterior grade paint over one coat of acrylic primer complete all as specified and as directed by Engr-in-Charge and as per manufacturers instructions.

M & L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engineer in Charge. Make : Royale Luxury Emulsion Asian Paint / Silk Glamor luxury emulsion Berger/ Impressions 24 carat Nerolac

M & L for preparation of old distempered surface of ceiling by washing, rubbing down and stopping, filling nail holes and applying one coat of distemper oil emulsion complete all as specified and as directed by Engr-in-Charge.

M & L for preparation of old decorated surfaces of wall by washing, rubbing down and applying two coats of Acrylic weather proof coat 100 % exterior grade paint complete all as per manufacturer instructions and complete all as specified and as directed by Engr-in-Charge.

M & L for preparation of new steel surfaces of any description, not otherwise described, exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engr-in-Charge. Make: Royale Luxury Enamel Brand Asian Paint (or) Equivalent brand in Nerolac/ Berger

M & L for preparation of old steel surfaces of any description, not otherwise described, exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. Make: Royale Luxury Enamel Brand Asian Paint (or) Equivalent brand in Nerolac/ Berger

M & L for preparation of old wooden surfaces of any description, not otherwise described, exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. Make: Royale Luxury Enamel Brand Asian Paint (or) Equivalent brand in Nerolac/ Berger

M & L for preparation of new wooden surfaces of any description, not otherwise described, exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge. Make: Royale Luxury Enamel Brand Asian Paint (or) Equivalent brand in Nerolac/ Berger

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 160 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 156 of SSR Part II (pertaining to item No 08080) complete all as specified and as directed by Engr-in-Charge.

M & L in repairs for Granite (of any type) tiles, 20mm thick machine cut, set, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including screed bed in cement plaster 15 mm thick 1:4, as in kitchen platform, cill of window, ventilator, border, flooring etc complete all as specified and as directed by Engineer-in-Charge.

S & F powder coated( any shade approved by GE) aluminium sections for sliding or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engr-in-Charge Note:- (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.

S & F 5.5mm thick sheet glass, ordinary quality, fixed with rubber beading, in square n exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size and description) from wooden/steel windows / ventilators frames, fixed with beads & S & F 3mm thick sheet glass, ordinary quality, fixed with wooden beading, in square n exc 0.5 sqm in each pane complete all as specified and as directed by Engr-in-Charge

S & F in repairs 18/19 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber/aluminium frame work complete all as specified and as directed by Engr-in-Charge.

S & F 15 micron coloured aluminium anodised grill , 6 mm thick, cut to required size/shape, and fixed in position with and including F section complete all as specified and as directed by Engr-in-Charge. Make- DECOGRILLE of Associated group or equivalent make as approved by GE

S & F in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity, heavy duty, white with inlet ball valve, float and handle including brackets, including flush pipe of polyethylene of low or high density or PVC 32mm dia and connected to WC complete all as specified and as directed by Engr-in-Charge

S & F in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm), including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc and screwed with brass screws to sheesham wood plugs embedded in floor complete all as specified and directed by Engineer-in-Charge.

S & F in repairs vitreous china wash hand basin, white, flat back of size 550 mm x 450 mm including 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, waste chain and plug and porcelain stopper including brackets,chromium plated waste coupling, waste fittings 32mm bore of brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed etc, cutting for and pinning in ends of brackets, connecting to supply and waste pipe complete as specified and directed.

S & F in repairs PVC connection 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed by Engr-in-Charge

S & F in repairs tubular towel rail, brass chromium plated, 20mm dia, 'D' type, 60cms long between flanges fixed to walls with screws complete all as specified and as directed by Engr-in-Charge.

S & F in repair brass chromium plated Health faucet with PVC tube 15mm dia and 900mm long with hook and chromium plated nuts complete all as specified and directed by Engr-in-Charge. Make:-Jaquar or equivalent as approved by GE

S & F in repair 8mm thick glass corner shelf, fancy type of dia minimum 300mm fixed wth brackets including all necessary brass chromium plated fitting complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 75mm bore PVC (SWR), bends of any radius complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 110mm bore PVC (SWR), bends of any radius complete all as specified and as directed by Engr-in-Charge.

S & F in repairs PVC (SWR) nahani trap, plain with grating including jointing with solvent cement, fixed in cement concrete 1: 2: 4 type B1,diameter of outlet 75 mm complete all as specified and as directed by Engr-in-Charge

S & F in repairs PVC (SWR), type B, single socketed, rain water/soil, waste, vent pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engr-in-Charge.

S & F in repairs PVC (SWR), type B, single socketed, rain water/soil, waste, vent pipes with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engr-in-Charge.

S & F in repairs steel water tubing of size 15mm bore, medium grade, galvanised iron with all Fittings such as Tees, elbows, sockets, bends, unions, shortpieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239, fixed to wall / ceiling or laid in floor with suitable size GI clamps including making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 15mm bore stop valves(concealed type), cast copper alloy, chromium plated , screwed down, high pressure, with crutch of butterfly handle, screwed down both ends for iron pipe or for unions , conforming to IS complete all as specified and as directed by Engr-in-Charge.

S & F in repairs stainless steel toilet paper holder, fixed to walls with chromium plated brass screws complete all as specified and as directed by Engr-in-Charge.

S & F in repairs 15mm bore Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, heavy duty, screwed down, screwed for iron pipe or for brass ferrule, conforming to IS complete all as specified and as directed by Engr-in-Charge.

PART II :- Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work after credit for the same is recovered by the dept and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed by Engineer-in- Charge

M & L for Point wiring with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing caping, medium grade (ISI mark) of adequate size with all fittings and accessories with concealed 1.2 mm thick pressed steel sunken box and with including modular cover plate and frame, suitable for fixing modular switch/socket of different modules and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / bell/ Exhaust Fan / wall fan, controlled by one modular switch, 1 way 6/10 amps, 1 modulecomplete all as specified and directed by Engineer-in- Charge Make of Cable : Anchor / Havells / Finolex / Polycab

All as per serial no.70 here-in but for One bell point controlled by one switch.

All as per serial no.70 here-in but for One ceiling fan controlled by one switch & regulator

All as per serial no.70 here-in but for One 3 pin socket point 5 Amps on independent board

All as per serial no.70 here-in but for One 3 pin socket point 5 Amps on same board

All as per serial item no 70 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth continuity conductor connected to common earth dolly complete all as specified & as directed by engr-in-charge.

M & L for Point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with all fittings and accessories with concealed 1.2 mm thick pressed steel sunken box and with including modular cover plate and frame, suitable for fixing modular switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / bell/ Ex Fan / wall fan controlled by one modular switch, 1 way 6/10 amps, 1 module complete all as specified and directed by Engineer-in- Charge Make of Cable : Anchor / Havells / Finolex / Polycab

All as per serial no.76 here-in but for One bell point controlled by one switch.

All as per serial no.76 here-in but for One ceiling fan controlled by one switch & regulator

All as per serial no.76 here-in but for One 3 pin socket point 5 Amps on independent board

All as per serial no.76 here-in but for One 3 pin socket point 5 Amps on same board

All as per serial item no 76 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth continuity conductor connected to common earth dolly complete all as specified & as directed by engr-in-charge.

S & F modular Switch piano, flush type single pole, one way 10 Amp complete all as specified and directed by Engineer-in- Charge

S & F modular Switch piano, flush type single pole, one way 20 Amp complete all as specified and directed by Engineer-in- Charge

S & F modular socket 2/3 pin, 10 Amp complete all as specified and directed by Engineer-in- Charge

S & F modular socket 2/3 pin, 20 Amp complete all as specified and directed by Engineer-in- Charge

S & F modular stepped type electronic fan regulator 450 watt flush type, two module complete all as specified and directed by Engineer-in- Charge

S & F modular bell push, 2 module, 10 Amp complete all as specified and directed by Engineer-in- Charge

S & F ceiling rose, surface bakelite 65 x 50 mm, two to three terminals complete all as specified and as directed.

S & F in repairs lamp holder, insulated body, with back plate for angular batten fittings with one PVC block of size 75mmX75mm for mounting the fitting including one led lamp 3 Watt (in Red / Green colour) complete all as specified and directed by Engineer-in- Charge Make of Lamp - Philips / Havells / Wipro

S & F in repairs calling bell ding dong type 230 volts complete all as specified and directed by Engineer-in- Charge

S & F modular Telephone socket, 1/2 module including cutting chases and with fix concealed1.2 mm thick pressed steel sunken box and with including modular cover plate and frame, suitable for fixing modular Telephone socket and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area) complete all as specified and directed by Engineer-in- Charge

S & F modular Television (TV) socket, 1/2 module.including cutting chases and with fix concealed1.2 mm thick pressed steel sunken box and with including modular cover plate and frame, suitable for fixing modular Telephone socket and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area) complete all as specified and directed by Engineer-in- Charge Note :- Make for Ser No 82 to 92 : Anchor / Havells / Legrand

Supply and fix / lay cable in repair PVC insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor of size 2.5 Sqmm, 3 core with non metalic PVC FR, heavy duty conduit of suitable size (20mm dia or more), with shaddle complete all as specified and directed by Engineer-in- Charge Note: Mode of measurement 2.5 Sqmm 3 core cable with PVC conduite shall be measured as one length. Make of Cable : Anchor / Havells / Finolex / Polycab

S & F in repairs GI perforated and ladder type cable tray of thickness size 1.5 mm and of size 150 mm X 30mm width and depth including connected other accessories by fixing srewes of adequate size and making good complete all as specified and directed by Engineer-in- Charge

S & F in repairs GI perforated and ladder type cable tray of thickness size 1.5 mm and of size 100 mm X 30mm width and depth including connected other accessories by fixing srewes of adequate size and making good complete all as specified and directed by Engineer-in- Charge

S & F PVC heavy duty conduit, ISI mark, of size 25 mm dia with saddle and including with insert of existing cable in conduit including taking down of existing cable complete all as specified and directed by Engineer-in- Charge

Taking down carefully copper/aluminium submain wiring complete including fixture such as Plug socket box etc., and making good to the disturbed surfaces of walls, floors etc.complete all as specified and directed by Engineer-in- Charge

Supply and laying sub main wiring (concealed type), for AC Point with two run of 4 sqmm stranded copper conductor wire (FRLSH) with one run of 4 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly and including rigid non-metallic PVC heavy duty conduit (ISI mark), 20/25 mm dia suitable size including cutting chases for conduits for concealed conduit wiring with all fittings and accessories and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area) complete all as specified and directed by Engineer-in- Charge Note: Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable with PVC conduit shall be measured as one length. Make of Cable : Anchor / Havells / Finolex / Polycab

Supply and laying sub main wiring for TPN DB to SPN DB with two run of 16 sqmm stranded copper conductor with one run of 16 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including 32/40 mm dia size of PVC conduit for housing the wires and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area) complete all as specified and directed by Engineer-in- Charge Note: Mode of measurement two runs of 16 sqmm cable and one run of 16 sqmm cable with PCV conduite shall be measured as one length. Make of Cable : Anchor / Havells / Finolex / Polycab

Supply and laying sub main wiring (concealed type) for TPN DB to SPN DB with two run of 16 sqmm stranded copper conductor with one run of 16 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly and including rigid non-metallic PVC heavy duty conduit (ISI mark), 32/40 mm dia suitable size including cutting chases for conduits for concealed conduit wiring with all fittings and accessories and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area) complete all as specified and directed by Engineer-in- Charge Note : Mode of measurement two runs of 16 sqmm cable and one run of 16 sqmm cable with PVC conduite shall be measured as one length. Make of Cable : Anchor / Havells / Finolex / Polycab

S & F mirror light 9W LED in repair, wall mounting fixture, compact & energy efficient light luminaire complete all as specified and directed by Engineer-in- Charge Make Havells Ct Pt No:LHEXARP7PN1W009 or in equivalent make of Wipro Cap pat No Wipro garnet 10 W LED Batten 6500K / Philips

S& F 20 watt LED in repair, 4 feet long fixed on PVC square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed by Engineer-in- Charge Make:Havells Cat pt no LHEXBXPNIN1W020 or equivalent in Wipro Cap pat No Wipro garnet 20 W LED Batten 6500K / Philips

S & F LED 36 Watt fitting in repair, minimum 110 Lumin per Watt, recessed mounted, full glow, 6500K/3000K slim type, of size 60 cm x 60 cm square type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as specified and directed by Engineer-in- Charge Make - Havells (Cat part No - ENDURASLIMPROPLUS2X2 PLR36WLED840MOD) or equivalent model of Wipro Model No LM25-361-XXX-65-G1** / Philips Model No - RC380BLED 34S-6500 L60W60PSDOD-51

S & F LED 12 Watt recessed mounted circular downlighter fitting in repair, 110 Lumin per Watt, decorative type, 6500K/3000K, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as specified and directed by Engineer-in- Charge. Make : Havells, Cat Part No : EDGEPRORDDLR12WLED840S or equivalent model of Wipro Model No LD90-141-XXX-65-XX* / Philips Model No -DN393B LED12S-6500 PSUWH

S & F LED 5 Watt recess mounted circular moveable type with 180 degree angle downlighter fitting, in repair (3000 K, Warm White colour ), slim type, 110 Lumin per Watt, decorative type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as specified and directed by Engineer-in- Charge Havells Cat Pat No- SPARKLEPROADJDLR8W830MOD40D / Wipro/ Philips-Cat Pat No DN311BLED6S-4000PSUMBWH

S & F VTPN DB vertical type in repair, 6 way VTPN double door load line powder coated complete alongwith 200 Amp rated Bus bar and including copper lugs / thimbles duly crimped for connection and cutting chases on wall suitable for concealed type DB and including with making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per specification and directed complete all as specified and directed by Engineer-in- Charge. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB

S & F in repair sheet metal enclosures for DBs when MCBs to be used 240 volts 8 way, double door with 200 Amps rated bus bar single pole and neutral and including copper lugs / thimbles duly crimped for connection and cutting chases on wall suitable for concealed type DB and including with making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per specification and directed complete all as specified and directed by Engineer-in- Charge. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB

S & F in repair modular single pole and neutral enclosure, 4 module alongwith cover plate with frame and two pin and earth plug and socket 20 Amp complete with one single pole MCB 20 Amp and including copper lugs / thimbles duly crimped for connection and cutting chases on wall suitable for concealed type DB and including with making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, match with existing colour in disturbed surface area), as per specification and directed complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB

S & F in repair MCCB 160 Amp, 4 pole, 415 V, Adjustable type, with breaking capacity 36 KA complete all as specified and directed by Engineer-in- Charge.

S & F in repair MCB SP, 240 volt, 6 to 32 Amps complete all as specified and directed by Engineer-in- Charge.

S & F in repair MCB SPN, 240 volt, 40 Amps complete all as specified and directed by Engineer-in- Charge. Note : Make for Item No 106 to 111 Anchor / Havells / Legrand / Schnider / L&T

N. M. Consultants

SHREE JAGDISH FURNITURE CO.

ASHOK CONSTRUCTION