SPL REPAIR TO BLDG NO R-67 OF 33 CHDS AND PROVN OF ATT TOILET AND BATHROOM AT TRG AREA OF 33 CHDS AT RONGLI AND PROVN OF TOILET NEAR TO BLDG NO A-72 MES AT RHENOCK AND PROVN OF SHARP OBJECTS PIT OF 417 FD HOSP AT RHENOCK UNDER GE 867 EWS

Amount

Excavation in trenches n exc 1.50m wide and not exc 1.50m deep for foundation and getting out in soft / loose soil complete all as specified and directed.

M&L Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft / loose sioil.felling under floor complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out of soft/loose soil complete all as specified and directed.

M&L PCC type D-2 (1:4:8) (using 40mm graded stone agg) in foundation filling and mass concrete complete all as specified and directed.

M&L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks 10cm in width and setting in CM (1:6) including demolition of brickwork or stone/boulder masonry built in cement mortor complete all as specified and directed.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks 10cm in and setting in CM (1:6) complete all as specified and directed.

M & L for cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggregate) as in coping complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc.for rough finished surface of flat concrete complete all as specified and directed.

M & L Reinforced cement concrete (Nominal mix ) type B1 (1:2:4) (20 mm graded crushed stone ggregate) as in Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and directed.

M&L mild steel deformed bars 10mm dia and over cut to length bend to shape required incld cranking bending spirally for hooping for column, hooking ends and binding with and incld mild steel wire (annealed not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

All as per item No.13 above but 5mm dia and over upto and incld 10mm dia in stirrups, spacer and binders complete all as specified and directed.

M & L 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:6 complete all as specified.

M&L 20mm thick rendering in two layers of 10mm each on brick or block concrete masonry walls in cement mortar 1:4 with WPC incl finished even and smooth w/o using extra cement all as specified.

M&L 15mm thick rendering on fair face of brick or block concrete masonry walls in cement mortar 1:4 finished even and smooth w/o using extra cement all as specified.

M&L 15mm thick rendering on brick or block concrete masonry walls in cement plaster 1:6 incl finished even and smooth w/o using extra cement including taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc complete all as specified and directed.

M&L 20mm thick rendering in two layers of 10mm each on brick or block concrete masonry walls in cement plaster 1:4 with WPC incl finished even and smooth w/o using extra cement including taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc complete all as specified and directed.

M & L preparation plastered or unplastered new surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L preparation of new plastered surfaces of walls and applying two coat of OBD over a coat of chalk whiting complete all as specified.

M&L Preparation of plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whiting complete all as specified.

S & F rolled section as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angles cleats or other connecting plates in FE-410W (Gde E-250) quality A complete all as specified and directed.

M&L Preparation and applying two coat of synthetic enamel paint over one coat of pink primer on new wooden surfaces, of any description, over 10cm width or girth not other wise described complete all as specified and directed.

M&L Preparation and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, of any description, over 10cm width or girth not other wise described complete all as specified and directed.

M & L hardcore of gauge exc 63mm but n exc 100mm,deposited, spred and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface complete all as specified and directed.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws complete all as specified and as directed.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws including dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital pattern roof covering all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws including dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital pattern roof covering all as specified and directed.

M & L for 75 mm thick cement concrete type D-2, (1:4:8) (40 mm graded aggregate) as in sub base or sub flooring fininshing the surface even and rough to receive the topping layer complete all as specified and directed.

M & L screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified.

S&F 10mm thick PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium /G.I. /M.S.complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings as per specification & drawing complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.

S & F 200mm long aluminium anodised barrel tower bolts of extruded sections complete all as specified and directed.

S & F 150mm long aluminium handle cost type anodised complete all as specified and directed.

S&F 75 mm size butt hinges, medium weight , cold rolled, mild steel and fixed complete all as specified and directed.

S & F steel ventilator with top hung shutter, including hinges, steel peg stay, complete all as specified and directed.

S & F 3.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L 75 mm thick PCC type C-2 (1:3:6) (40 mm greded stone aggt) for plinth protiction, path/ steps etc to be finished fair and even complete all as specified and directed.

S & F 110 mm bore PVC Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S & F 110 mm bore PVC bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 75 mm bore PVC bends with including for all necessary extra joints cuttings and waste to any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed completet laid in trenches complete all as specified and directed.

S & F bib taps cast copper alloy chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore complete all as specified and directed.

S & F 15mm dia fancy type pillar tap, cast copper alloy, capstan heads, chromium plated,screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe, all as specified and directed.

S & F Stop cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed.

S & F shelf of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 300 gms) complete all as specified and directed.

S & F towel rail 600 mm long of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 190 gms) complete all as specified and directed.

S & F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in vitreous china WC pan semi-pedestal pattern (Anglo Indian Type) colour white complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F toilet paper holder with flat recessed type stainless steel fixed to wall complete all as specified and directed.

S & F PVC valve less , syphonic action type flushing cistern 10 ltr capacity low level, with inlet, ball valve float, flush pipe and handle including brackets omplete all as specified and directed.

S&F Vitreous china WHB 550x400 mm white flat back including pedestal and bracked complete all as specified.

M & L PCC (1:4:8), type D-2 conrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in 110mm dia omplete all as specified and directed.

S&F vitreous china urinals, haif stall type white with grating and union for discharge pipe including fixing plugs beddeing urinal againest wall in cement morter (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60 gms) complete all as specified and directed.

M&L machine pressed chequered cement concrete tiles size 30cm x 30cm x 25mm thick and above, set,jointed and pointed in neat slurry with grey cement and pigments in floors cut and polished. over and incl 15mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster (1:6) all as specified and as directed.

Form work to sides of concrete foundations, footings, bases of columns and plinth beam, drain and similer work etc in rough finished surfaces of concrete flat complete all as specified and directed.

M&L for PCC type C-2, (1:3:6) (using 40 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for 100mm cast iron pipes with spigot and socket ends, vertically cast, class A, in any length, any position complete all as specified and directed.

M&L Chequered cement concrete tiles 32cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment and 15 mm thik sceed bed or bedding layer in cm(1:6) complete all as specified and directed.

M&L for precast cement concrete type B-1, (1:2:4) ( using 20mm graded stone aggregate) as in manholes cover, chullah hoods, water through, mangers, shelves and similar articles with plain faces set in CM (1:6) complete all as specified and directed.

S&F GI frame work of size 605 x 605mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flangesof 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including dismantling of wall and ceiling boards( fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets all as specified.

S&F hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete all as specified and as directed.

M&L 4mm thick asbestos cement plain building boards, fixed or laid /inserted to GI snap grid framework with screw in ceilings complete all as specified and directed.

M&L for three coats of white wash on ceiling boards complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm all as specified and as directed.

S&F Pressed steel door frame for doors, size 165 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.

S&F 35mm thick plain framed panelled shutter (any number of panels) of 2nd class H.W with panels of timber flat on both sides or of venerred particle boards medium density, wood particle board with commercial face veeners complete all as specified and directed.

S & F 2nd class hard wood 30mm thick Glazed and skeleton shutter, poen rebated and prepared to receive glass, gause,etc (without sash bar), edges of framing plain or chamfered or rounded, fitted with cut and mitred beads for securing glass etc; size of members of shutters as specified in SSR -I ,section 8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and directed.

S&F Steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay complete with glazing bars complete all as specified and directed.

S&F Steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay complete without glazing bars complete all as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

S&F 3mm thick sheet glass, oridinary quality and glazing with oil putty in square n etc 0.5 sqm in each pane complete all as specified and directed.

S & F Galvanised wire cloth, 0.63 mm nominal dia of wire and average width of aperature 1.4mm and fixed with tinted tacks or galvanised wire staples as in fly proof window and door ,all as specified and directed.

S&F 250 mm long aliminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

S&F anodised Extruded aluminium alloy handles 150mm long, fabricated type complete all as specified and directed.

M&L 75mm thick PCC type C-2, (1:3:6) (40mm graded stone aggt) as in path, plinth protection, etc., including Demolition of cement concrete (Unreinforced) in ground floor and pavings n exc 15cm thick ness (below or above ground level) all as specified and as directed.

M&L for PCC type C-2, (1:3:6) (using 40 mm graded crushed stone aggregate) as in surface channels and drains including Demolition of cement concrete (Unreinforced) in ground floor and pavings n exc 15cm thick ness (below or above ground level) all as specified and as directed.

S & F Roof trusses (Framed), trussed , purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections ) including distance pieces cleats etc FE-410W (Gde E-250) quality A including dismantling wrought iron or mild steel work of any description complete all as specified.

M&L joint free non skid ceramic colured tiles 7 to 8mm thick, area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm, in floors etc. set & jointed in neat cement slurry over 15mm screed bed or bedding layer CM (1:6) & pointd in coloured cement to match complete all as specified and as directed.

M&L glazed ceramic coloured tiles 300 x 200mm x 7mm thick on vertical surfaces such as skirting, dados, set & Jointed in neat cement slurry over 15mm screed bed or bedding layer CM (1:4) & pointed in colour cement to match complete all as specified and as directed.

S&F in repair anodised aluminium alloy curtain rail with fixing brackets, stops, rollers etc complete all as specified and as directed.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 3.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 3.0 mm thick Laminated sheet top covers etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly including taking down existing point wiring complete all as specified and directed.

All as per item No.95 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board complete all as specified and directed.

All as per item No.95 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on same board complete all as specified and directed.

All as per item No.95 here – in – before but for one switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable complete all as specified and directed.

Supply and fix in repair switch piano flush button, single pole, 5 amps, one way all as specified and as directed.

Supply & Fixing in repair ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.

Supply and fix in repair switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type all as specified and as directed.

Supply and fixing in repair switch socket combination 2 – in – one 6 Pin , 5 / 15 amps flush type universal all as specified and as directed.

Supply and fixing in repair LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F in repair LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 12 W complete all as directed.

S&F in repair LED security light suitable for 20 W LED with pressure di cast housing with epoxy power coated drak graphite grey colour finish , Prismatic ploycarbonate cover with individual LED lenses, IP65 by using 25mm dai GI bracked fixed on wall by means of nuts, botls and clamps complete all as specified and directed.

S & F in repair LED light fitting 1x9W / 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for Earthing in repairs complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1 : 3 : 6) type C-1 , 50 mm thick pre cast RCC (1 : 2 : 4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.

M&L Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 20 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the concealed to wall/ceiling including one run of 6.0sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductorincluding taking down existing submain wiring complete all as specified and directed.NOTE : Two runs of single core 6.00 sqmm and one run of 6.00 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

M/L for Point wiring complete with 1.5 sqmm single core PVC insulated and PVC unsheathed FRLS multistranded copper conductor cable 1100 volt grade enclosed in and including PVC casing and capping with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including sunken junction box not less than 3.0 mm thick concealed in wall, mounting accessories like switches, sockets fan regulators with 3.0 mm thick Laminated sheet top covers etc including 1.5 Sqmm single core multi stranded copper conductor PVC insulated and unsheathed cable as earth continuity conductor to common earth dolly complete all as specified and directed.

All as per item No.113 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board complete all as specified and directed.

All as per item No.113 here – in – before but for one switch socket outlet 15 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable complete all as specified and directed.

Supply and fix switch piano flush button, single pole, 5 amps, one way all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.

Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5 amps flush type all as specified and as directed.

S&F Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc., complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 4 way 240 Volts AC complete all as specified and directed.

Supply and fixing MCB Single pole and neutral 40 Amps capacity 10 KA 240 Volts 50 HZ, 'C' curve. Cat part No 4086 18 of Make : Legrand or equivalent in Siemens/Schneider.

Supply and fix MCB single pole (SP), 10 kA of 5 -32 Amps capacity 240 Volts, 'C' curve. Cat part no 4085 95 of Make : Legrand or equivalent in Siemens/Schneider

S & F 9W LED Bulb suitable for B22 holder . System Efficacy should be > 85 lm/ W. PF > 0.9, The Lamp Should have Cool Daylight Color temp of 6500K, lumen output >800 lm complete all as specified and directed.

S & F lamp/angle holder,PVC/Polycarbonate type and back plate suitable for batten fitting complete all as specified and directed.

S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC complete all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240V complete all as specified and directed.

M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25/16 mm PVC cashing & capping medium grade ISI marked and conduit junction boxes, terminal boxes and incl all accessories fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor.NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size cashing & capping with accessories shall be measured as one length complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1 : 3 : 6) type C-1 , 50 mm thick pre cast RCC ( 1 : 2 : 4) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I and as directed.

S&F of Exhaust fan 200 mm sweep 1300 RPM with minimum airflow/air delivery 450 Cmh, light weight, rust proof body & blades, self opening louvers for protection from birds & rain water, IP-55, 200-240 Volt AC supply, rated power input not more that 30watt, connecting up including provison of cable from ceiling rose to fan. Make : Crompton Greaves, Model : BRISK AIR , or equivalent in USHA/Bajaj.

M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. mm 3 core all as specified and directed by Engr-in-Charge.

S&F Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m all as specified.

M&L for sand cushioning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches complete all as specified and directed. Note :- Only Punned layers shall be measured.

M&L for common burnt bricks, sub class 'B', of size 250 x 125 x 75 mm laid in trenches for cable protection complete all as specified and directed by Engineer-in-charge.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor on wall with the help of shadel of size 25 Sqmm 4.0 core as required at site including taking down existing cables complete all as specified and as directed.

M & L GI tube light grade for passing through cables under the floor ,along the wall or along the pole of 40 mm bore and fixed to the poles/walls with suitable size of MS clamps and nut and botls/washers etc including taking down existing pipe complete all as specified and as directed.

S&F gun metal, globe or gate valves of 25 mm bore dia with iron wheel head, screwed both ends for iron pipes and fixed including taking down old unserviceable one complete all as specified and directed.

S&F Rotational moulded polythene water storage tank (cylindrical vertical with closed tops) hoisted and fixed in position of 1000 Ltrs capacity, all as specified and as directed.

S&F steel water tubing 25 mm bore sizes, ‘Medium grade’, galvanized, with all fittings; laid in trenches or on ground complete all as specified and directed.(Excavation and earth work measured and paid separately)

S&F PVC float valve, high pressure with polythene float and fly nut complete screwed for PVC pipe and fixed in 20mm bore pipe complete all as specified and as directed by Engineer-in-charge.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; all as per directed at site.

M & L for painting on new surfaces with two coats of synthetic enamelled paint on a coat of red oxide primer complete all as specified and directed by the Engineer-in-Charge.

M & L for cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate ) as in foundation , filling and mass concrete complete all as specified and directed.

M&L for cutting existing steel tubing 25/40mm dia for alterations or additions (Each cut measured) and inserting new Tee, bend, elbow etc for following size GI tubing all as specified and directed by Engr-in-Charge.

Note : In case of doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

PRASAD PRADHAN AND SON (BID ID -3255257)

SANJAY SAW MILL (BID ID -3249781)

MS BRAHMA CONSTRUCTION (BID ID -3255258)

SUNIL PRADHAN (BID ID -3255233)

M/S JAYSHREE CONCERN (BID ID -3255237)

G K SUTHAR (BID ID -3255250)

RAJU TAMANG (BID ID -3255232)