Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Documents found in order and approved by CTA |
| 2 | Accepted-Technical MGE UDAY NAGAR BARMER BARMER MAGARA BARMER RAJASTHAN 344001 UDYAM RJ 05 0011326 08BXOPR8466F3ZM B M R | BARMER | RAJASTHAN | 344001 | Accepted-Technical Documents found in order and approved by CTA |
| 3 | Accepted-Technical | Accepted-Technical Documents found in order and approved by CTA |
| 4 | Rejected-Technical | Rejected-Technical Documents not found in order and rejected by CTA |
| 5 | Rejected-Technical | Rejected-Technical Documents not found in order and rejected by CTA |
Tender Value
₹6.0 L
EMD Value
₹11,956
Closing Date
1 Jul 2026, 11:00 amClosed
AE ELECT SHQ BSF BMR
AE ELECT SHQ BSF BMR
REPAIR AND MAINTENANCE OF EXISTING LIGHT FITTINGS ACCESSORIES AT ADM BLOCK COMMA SOS MESS COMMA CONFERENCE HALL COMMA OFFICERS MESS COMMA MUNABAO G TEAM AND BARMER G TEAM OFFICE AT SHQ BSF BARMER
2026_BSF_914203_1
01/AE(E)/NIT/SHQ-BMR/2026-27
Open Tender
Electrical Works
Percentage
90 days
DIG SHQ BSF BARMER
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹11,956
7 Jul 2026
22 Jun 2026
2 Jul 2026
22 Jun 2026
1 Jul 2026
22 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim | |||||
| 1.1 | 5 - 7 watt | 118 | Each | 542 | ₹63,956 |
| 1.2 | 12 -15 watt | 26 | Each | 715 | ₹18,590 |
| 1.3 | 18 watt | 67 | Each | 920 | ₹61,640 |
| 2Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range-5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) | |||||
| 2.1 | 18- 22 Watt | 285 | Each | 681 | ₹1,94,085 |
| 3 | Supply, Installation, Testing and Commissioning of Surface Mounted LED 2x2 feet Panel Light compatible with system wattage of 36W and luminaire lumen package of 4320 lumens, IP20, Colour Temperature 3000K/4000K/5700K/6000K/6500K, CRI >80, SDCM <5, Electrical Insulation – Class-I, Serviceability – Class-B, Ambient Temperature 45°C. The system efficacy shall be >120 lm/W. Inbuilt surge protection 3.5KV, Driver fixed current output suitable for operating voltage range 140-270V AC, THD <10% (at full load). The housing shall be CRCA powder coated white after phosphochromate treatment with high transmittance Polystyrene (PS) opal diffuser for glare free symmetrical light distribution. LED shall satisfy IEC 62471 Photobiological Safety and RoHS standards, with 120° beam angle. Average LED life shall be L70B50 @ 50,000 hours at 45°C ambient temperature. Driver efficiency shall be >85% and Power Factor >0.95. Both driver and luminaire shall be BIS compliant complete as required. Havells Cat. No. PLANO2X2PLR36WLED857S0720 Approved Make: Philips / Havells / Wipro / Crompton / Polycab / C&S / Surya / Orient or equivalent approved by Engineer-in-Charge. | 27 | Each | 5,492 | ₹1,48,284 |
| 4 | Supply, Installation, Testing and Commissioning of Recess Mounted LED 2x2 feet Panel Light compatible with system wattage of 36W and luminaire lumen package of 4320 lumens, IP20, Colour Temperature 3000K/4000K/5700K/6000K/6500K, CRI >80, SDCM <5, Electrical Insulation – Class-I, Serviceability – Class-B, Ambient Temperature 45°C. The system efficacy shall be >120 lm/W. Inbuilt surge protection 3.5KV, Driver fixed current output suitable for operating voltage range 140-270V AC, THD <10% (at full load). The housing shall be CRCA powder coated white after phosphochromate treatment with high transmittance Polystyrene (PS) opal diffuser for glare free symmetrical light distribution. LED shall satisfy IEC 62471 Photobiological Safety and RoHS standards, with 120° beam angle. Average LED life shall be L70B50 @ 50,000 hours at 45°C ambient temperature. Driver efficiency shall be >85% and Power Factor >0.95. Both driver and luminaire shall be BIS compliant complete as required. Havells Cat. No. PLANO2X2PLR36WLED857S Approved Make: Philips / Havells / Wipro / Crompton / Polycab / C&S / Surya / Orient or equivalent approved by Engineer-in-Charge. | 4 | Each | 4,685 | ₹18,740 |
| 5 | Supply and fixing wall bracket decorative wall light fixture made up of polycarbonate suitable for up to one number 9 Watt LED ball lamp (B-22 base) complete with all accessories and lamp including connection etc. as required. (STYLO Cat. No. LHFOECE1TZ1O014 Havells or Philips / Wipro / Crompton / Polycab / C&S / Surya / Orient or equivalent approved by Engineer-in-Charge.) | 25 | Each | 1,194 | ₹29,850 |
| 6Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required | |||||
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.59 MB
BOQ_960739.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .