BHAINI MAHARAJPUR- ESTIMAT...

Amount

PANEL BOARD FOR MOTORS: Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for 1 Non clog Submersible Pumping a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) 20 HP power Motor

`Copper conductor: Supply, erection, testing and commissioning of IS marked 3 core copper wire with accessories like thimble lugs etc for motors in trenches or underground in PVC and flexible pipes as per entire satisfaction of Engineer-in-charge complete in all respect. ` 25mm2 3core

PANEL BOARD FOR MOTORS: Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for 1 Non clog Submersible Pumping a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) 5 HP power Motor

`RAW WATER PUMP: Supplying, erection, testing and commissioning of Horizontal motor pumping set for Raw water having head as per the indicated requirements of discharge in LPM and power capacity in BHP as per IS marked ` 500 LPM X 12 M X 5.0 HP

`RAW WATER PUMP: Supplying, erection, testing and commissioning of Horizontal motor pumping set for Raw water having head as per the indicated requirements of discharge in LPM and power capacity in BHP as per IS marked ` 1900 LPM X 20 M X 15.0 HP

Water treatment plant (WTP) designing, testing, commissioning of 0.50 MLD capacity water treatment plant including inlet channel alum dozing, flansh mixing, clari floculator, filter box, over head resrvoid for back wash, waste water tank, including all civil work pumping machinery and electric cabling control panel, entire piping network of suitable size laying of DI pipes from raw water pump 0 to inlet box of WTP, WTP to CWT & Suction well for CW including, DI specials suitable size of sulice valve hodies manhole covers air scour equipment, chemical house including chlorination equipment and arrangment of flow measurement and sand bed with autromation complete in all respects as approved NIT. (Sluice valve of make (IVCAWAG).

PANEL BOARD FOR MOTORS: Supply, erection, testing and commissioning of wall mounted electrical LT Panel board, fabricated from 16 SWG CRCA sheet duly stouten with suitable angle iron frame work and completely powder coated of suitable size deep having following items for 1 Non clog Submersible Pumping a) Main switch suitable ampere 1 No. (LandT Siemens, ABB) b) CT 100/3 = 1 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, star delta 1 No (LandT Siemens, ABB) f) VSS 1 No. and ASS 1 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) 15 HP power Motor

Supply erection testing of standard make XLPE 3 core galvanized steel trip armored HT / 11 KV grade ISI marked cable with aluminum Conductor in ground covered with sand and brick in trenchs in pipes for making following connection a) from DHBVN G.O switch to metering equipment . b) from metering equipment to transformer complete in all respect . 50mm2 3core

Operation and Maintenance for complete scope of work mentioned in the DNIT (Disinfection material supplied by PHED) as per schedule-IV for a period of 5 year after 12 month during defect liability period and 03 Months trial run period will be charged to the A/Mtc. estimate complete in all respect as per approved NIT. (i) Operation and Maintenance during defect liability period (Operation only) after 3 month trial run period.

(ii) Operation and Maintenance during 1st year after defect liability period.

(iii) Operation and Maintenance during 2nd year.

(iv) Operation and Maintenance during 3rd year.

(v) Operation and Maintenance during 4th year.

(vi) Operation and Maintenance during 5th year.

Bidder Name

Amount

Sunil Kumar(GSTN-06BMGPK6616K1ZU)

RAJKUMAR(GSTN-06BMEPK8901M1ZS)

Sunil Kumar

Sunil Kumar