Supply, Delivery, installation, testing commissioning with 3 month trial run 5 years operation and maintenance of Pumping Machineries Raw water pumping -6 no of pumps each of (1700 Cum/Hr. with 28 mtrs Head), 415V MCC at pump house, powe

Amount

Pumping Machinery (Lt 415 Volts Design,Manufacture, Supply, Installing, Testing & Commissoning Of Vetical Turbine Pumps With Suitable Rpm For Following Duty Points. a) Duty Point Discharge 1700 Cum/Hr. (Each pump) b) Duty Point Head(28M) Suitable To Provide Combined Discharge At Rated Head As Mentioned And Pump Efficiency Shall Be Not Less Than 75%. c) These Pumps Should Be Suitable For Parallel Operation To Deliver The Required Combined Flow Of 6800Cum/Hr For 20 Hrs In A Day, Continuous Operation By Running 4 Pumps With 2 Standby Pump At Combined Duty Point Head 28M, 0.415 Kv 3 Phase 50 Hz Vertical Squirrel Cage Induction Motor ,Design ,Manufacture ,Supply, Erection ,Testing And Commissioning Of 0.415 Kv 3 Phase 50 Hz Vertical Squirrel Cage Induction Motor Suitable To The Above Pump. The Motor Shall Be Conforming Toip55 Class Of Protection Tefc,Caca,Tewc Type Of Enclosure Class F Insulation With A Temperature Rise Limited To Classb And As Per The Standard Specifications. d) Specific gravity of Raw water 1.05.

Supply, Delivery, Installation, Testing & Commissioning Of 10 Ton Eot/Hot Crane For Raw Water Pump House .C/C Span is 15 m and movable length is 25.5 m and Hoist lift is 10 m

Supply, Delivery, Installation, Testing & Commissioning Of Lt Mcc Panel Board And Capacitor Bank For All Lt Motors Of Raw Water Pump House as Per SLD.

Supply, Delivery, Installation, Testing & commissioning of FCMA Soft Starter Panel for 415 V LT Motors of Raw water pumps.

LT 1.1 Kv Grade XLPE Cable From Mcc Panel To Corresponding Motor/Stater Etc. Within The Pump House.

Supply, Delivery, Installation, Testing & Commissioning Of Ventilation Fans For Pump House.

Supply, Delivery, Installation, Testing & Commissioning Of Local Control Panel And Push Button Stations.

Supply, Delivery, Installation, Testing & Commissioning Of Different Earthing Systems Of Equipments (Other Than Sub Station),Cable Trays,Lighting Arrester Etc.

Supply, Delivery, Installation, Testing & Commissioning Of Indoor & Outdoor Lighting And Small Power Distribution System.

Internal Illumination Of Pump House With Complete Wiring .

Supply, Delivery, Installation, Testing & Commissioning Of Instrumentation Work & Other Ancilliary Works.

Supply, Delivery, Installation, Testing & commissioning of different MS/DI specials,joints, valves (Motorized BF, non return valve, Dismantling joints) 600Mm Dismantling Joint: Manufacture, Supply And Delivery Of M.S. Dismantling Joints With Gl Studs Of 600Mm S1Ze With Both Side Flange End Suitable For Installation In Between Flanged End Pipes. Pressure Rating Pn-10 And Drilling Standards Shall Be As Per Is:1538.

Supply, Delivery, Installation, Testing & commissioning of different MS/DI specials,joints, valves (Motorized BF, non return valve, Dismantling joints) 600MM PN 1.0 DI D/F Swing Check type reflux non return valve of below mentioned PN Ratings , Dia / Sizes confirming to the body and door shall be of closed grained cast iron IS:210 Gr 20; body seat shall be of stainless steel SS 304, disc seat shall of natural rubber and the trunnion shaft shall be of stainless steel AISI 410,as per IS:5312 (Part 1) with drilling and thickness as per IS: 1538.

Supply, Delivery, Installation, Testing & commissioning of different MS/DI specials,joints, valves (Motorized BF, non return valve, Dismantling joints) 600MM, PN-10 ,ELECTRICALLY OPERATED D.I.DF BUTTERFLY VALVE : Butterfly valves shall be of wafer type double flanged and short body type conforming to IS: 13095; The drive shaft and end shaft shall be of stainless steel IS: 6603 Gr 12 Cr 12 or Stainless steel BS 970 Grade 413 S19 ; Face to face dimensions as per As per IS:13095 or BS:5155, Disc seal ring - EPDM,Disc seal retaining ring - Stainless steel ASTM 351-CF8M, Body seat - Stainless steel AISI 316/ nickel weld overlay micro finished/ integral micro finished seat with valve body. Drilled as per lS 1538. Acuators shall be with integral stafters and shall have position transmitters.

Supply, Delivery, Installation, Testing & commissioning of different station pipes, specials and misc. materials A) Manufacturing of MS pipes shall be done in conformity with IS: 3589, 610.00 MM (OD) B) Manufacturing of MS pipes shall be done in conformity with IS: 3589, 1219.00 MM (OD) With 11.00 MM ThicknessMs-Pipe

Supplying, installation of Valves (Air valves/Sluice/Butterfly/Washout /Pressue Reducing etc.), Electro-magnetic flowmeter on Raw water Pumping Main from Intake Pump House and upto WTP all complete. 1200 MM, PN-10 ,ELECTRICALLY OPERATED D.I.DF BUTTERFLY VALVE : Butterfly valves shall be of wafer type double flanged and short body type conforming to IS: 13095; The drive shaft and end shaft shall be of stainless steel IS: 6603 Gr 12 Cr 12 or Stainless steel BS 970 Grade 413 S19 ; Face to face dimensions as per As per IS:13095 or BS:5155, Disc seal ring - EPDM,Disc seal retaining ring - Stainless steel ASTM 351-CF8M, Body seat - Stainless steel AISI 316/ nickel weld overlay micro finished/ integral micro finished seat with valve body. Drilled as per lS 1538. Acuators shall be with integral stafters and shall have position transmitters.

Supplying, installation of Valves (Air valves/Sluice/Butterfly/Washout /Pressue Reducing etc.), Electro-magnetic flowmeter on Raw water Pumping Main from Intake Pump House and upto WTP all complete. 1200Mmϕ Electro Magnetic Flow Meter On Rising Mains With Range-7000 M3/Hr ,Type-Electromagnetic Flow Meter Accuracy-+/- 0.5% Of Full Scale Or Better All Required Mounting Accesaries,O/P-4-20Mamp Sensors & Transmitter Shall Be Seprated Pressure Rating -Pn 1.0,Scada Compartble.

ADD GST 18%

integrated engineering (BID ID -6545417)

Bhugan Infracon Pvt. Ltd. (BID ID -6552586)

Sri Padmavathi Engineering Works (BID ID -6551152)