Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.3 LAccepted-Finance | L1 | Accepted-Finance BEING LOWEST | |
| 2 | L5₹26.4 L+₹8.1 L (44.6%)Accepted-Finance 93 SRP KOVIL STREET PERAVALLUR CHENNAI 600 082 | CHENNAI | CHENNAI | TAMIL NADU | 600082 | L5 | Accepted-Finance BEING NOT L1 | |
| 3 | L2₹22.4 L+₹4.2 L (22.8%)Rejected-Finance PLOT NO 15 JAYASURIYA STREET GANGAI NAGAR KALLIKUPPAM AMBATTUR CHENNAI 600053 | CHENNAI | CHENNAI | TAMIL NADU | 600053 | L2 | Rejected-Finance BEING NOT L1 | |
| 4 | L3₹23.3 L+₹5.0 L (27.6%)Rejected-Finance OLD NO 2C NEW NO 7 1 THANGAVELU VAITHIYAR STREET CORPORATION MIDDLE SCHOOL TRIPLICANE CHENNAI 600005 | CHENNAI | TAMIL NADU | 600005 | L3 | Rejected-Finance BEING NOT L1 | |
| 5 | L4₹24.7 L+₹6.4 L (35.1%)Rejected-Finance NO 21 BRAMIN STREET KORATTUR CHENNAI 600080 | CHENNAI | CHENNAI | TAMIL NADU | 600080 | L4 | Rejected-Finance BEING NOT L1 |
Tender Value
₹23 L
EMD Value
₹46,000
Closing Date
1 Jul 2024, 6:00 pmClosed
Garrison Engineer (I)(CG) Chennai
Garrison Engineer (I) (CG) Military Engineer Service CGRA Meenambakkam Building No P 16NGO Colony 4th Street Nanganallur Chennai 600 061
PROVN OF WICKET GATE, RESTING SPACE WITH ALLIED FACILITIES FOR SECURITY PERSONNEL,PROVN OF SIGNAGE ON TOP AND MIDDLE PORCH OF MRCC BUILDING,PROVN OF SIGNED BOARD AT MAIN ENTRANCE GATE, FLAG POST AT TERRACE, CERTAIN E/M LIGHT FITTINGS AT CHENNAI
2024_MES_658271_1
8127/E8
Open Tender
Civil Works
Item Rate
90 days
RHQ EAST CHENNAI
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (I)(CG) Chennai
₹46,000
Yes
5 Sept 2024
8 Jun 2024
3 Jul 2024
8 Jun 2024
1 Jul 2024
18 Jun 2024
8 Jun 2024 - 14 Jun 2024
Amount
M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and as directed.
M&L for P.C.C (1:4:8) type D2 using 40 mm graded stone aggregate as in foundation filling , mass concrete etc. complete all as specified and as directed.
M&L for 75 mm thick P.C.C. (1:3:6) type ‘C2’ using 40 mm graded stone aggregate as in plinth protection and finished the surface even & smooth without using extra cement all as specified and directed.
M&L for RCC 1:1.5:3 ( Type A 1 ) using 20 mm graded aggregate in foundation , including rafts , footings , foundation beams ; plinth beams ; baasement slabs , undereamed piles and mass concrete complete all as specified and as directed.
M&L for reinforced cement concrete type A1 1:1.5:3 using 20 mm graded aggregate as in columns Pillars piers posts and struts complete all as specified and direcetd by the Engineer-in-Charge.
M&L for modular brick work with fly ash brick straight or curved on plan exe. 6 meters mean redius built in cement mortar 1:6 complete all as specified and as directed.
M&L for fly ash brick straight or curved on plan to any radius in half brick wall in cement mortar 1:6 complete all as specified and as directed.
S&F Framed work as in steel post or other section with gusset plates , rails , braces etc . complete and gates Fe-410W(Gde-E-250 quality) to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging gate fitting complete all as specified and directed .
S&F for Rolled sections as in main and cross beams, Post, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates all as specified and as directed.
S & F MS TMT of 10 mm dia , cut to length bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (anneled) not less than 0.9mm dia. all as specified and as directed.
M&L for TMT steel bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified .
M&L of steel scafloding to fix letters and signage and fixing in ground for period of 1 month covering 1200 Sqm and same shall be propeply fixed and layout and post completion of work the same shall be dismantled all as specified and directed.
Supply and Fixing of stainless steel letters of size 2' feet x 1.5"inches incuding necessary fixing arrangements complete all as specified and as directed.
Supply and Fixing of stainless steel letters of size 1' feet x 9" inches incuding necessary fixing arrangements complete all as specified and as directed.
Supply and Fixing of Aluminium composite panel of size 3mm thickincuding necessary fixing arrangements complete all as specified and as directed.
M&L for use and waste formwork to side of concrete foundatrion , footings , base of columns , raft and beams , sides and soffits ( if any ) of foundation and plinth beams and similiar work , vertical or to better , rough finished surface of concrete complete all as specified and as directed by Engr-in-Charge.
M&L for Use and waste formwork to sides of pillars, post, structs piers columns and stanchions etc with rough finished square or rectangular complete all as specified and directed by Engr-in-Charge.
M&L for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment complete all as specified and directed by Engr-in-Charge.
M&L 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20 mm thick screed bed or bedding layers in cement mortar 1:6 for laying floor finishes complete all as specified.
M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair faces of brick wall in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even. (Note -W.P.C. shall be measured and paid separetly)
Supply only integral water proofing compound all as specified and as directed.
S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
M&L for preparation old undecorated plastered surface of walls Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Supply and fixing JETA QUANTO PLUS LED mono colour flood light luminaire offered in Mono-Red, Green, Blue and warm white colour,(Warm White - 7, Red-5, Green-5 = 17 Nos of Fittings) pressure die cast aluminium body and clear PC cover, and standard beam angle of 30 degree. Aesthetic consistency in multi purpose application like column lighting, tree up-lighting, statue accentuation etc. complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size includingat fixing at wall/floor/roof and fixing accessories like nut bolt etc., complete all as specified and as directed. Make : Havells, Model No. JETA QUANTO PLUSFLS50WLEDREDP30DPC. or equivalent in Phillips/Bajaj/Wipro
Supply and fix Wiring for Circuit / Submain Wiring of FRLS cable size 2 x 2.5 sq.mm along with earth wire of size 1 x 2.5 sq.mm, Single Core, PVC insulated copper conductor (Fire Retardant) Cable in surface/recessed drawn through and including PVC casing capping complete all as specified and as directed. Make of casing capping: Honeywell
Supply and fix Wiring for Circuit / Submain Wiring of FRLS cable size 2 x 4.0 sq.mm along with earth wire of size 1 x 4.0 sq.mm, Single Core, PVC insulated copper conductor (Fire Retardant) Cable in surface/recessed drawn through and including PVC casing capping complete all as specified and as directed. Make of casing capping: Honeywell
S&F sheet metal enclosure for SPN DB 4 way complete all as specified and as directed.
Supply and lay cable XLPE insulated screened PVC bedded, galvansized steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor cross sectional area 6 Sqmm 2 Core complete all as specified and as directed by Engr-in-Charge
S&F MCB SPN 32 Amps, Rupturing capacity 10kA all as specified and directed by Engr-in-Charge.
S&F MCB SP 6 to 32 Amps, Rupturing capacity 10kA complete all as specified and directed by Engr-in-Charge.
Banyan Engineers and Contractors
NAVEEN ENTERPRIESES
kvs constructions
JANANIKARTHIK ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .