81421 RESURFACING OF ROAD AND REPAIR TO ROAD FURNITURE AT INS PARUNDU GE TIRUNELVELI

Amount

SCHEDULE 'A' PART-I (ROAD WORKS)

Repair to pot holes, not exceeding 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25 mm depth, making good by filling in screened and graded road metal, watering and well ramming, including supply of road metal/ aggregates, complete all as specified and directed.

Material and Labour for Preparing of existing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., and applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 3kg/10 sqm on bituminous surface as specified in Table 500-5 of MORTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface complete all as specified and directed.

Material and labour for Bituminous premix semi dense asphaltic concrete (SDAC), 30 mm consolidated thickness with 5.5 % binder content of paving bitumen by weight of total mix using VG-30 grade bitumen, rolled and compacted to required camber and gradient complete using mechanical paver and rolled using power roller 8 to 12 tonne capacity complete all as specified and directed. Note: The contractor's quoted rates shall also be deemed to include the following element:- (i) In case of variation in the binder content as per approved design mix in comparison with the binder content as specified above, the variation in qty of binder content on lesser side shall be adjusted through supply only rate of Bitumen VG-30. However, variation on the upper side shall be carried out by the contractor without any price adjustment.

M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Material and labour for premix bituminous macadam with 4 % binder content of paving bitumen by weight of total mix using VG-30 grade bitumen, rolled and compacted to required camber and gradient using power roller 8 to 12 tonne capacity, consolidated thickness of 75 mm or less, complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed

Material and labour for 50 mm thick (spread thickness) moorum / red bajri, filling in roads, spread, rolled and consolidated to gradient and camber as required, complete all as specified and directed.

ARR ENTERPRISES (BID ID -3150279)

M/s.Sai Agency (BID ID -3142117)

sri manikandan enterprises (BID ID -3143818)

S KUMARAN (BID ID -3144109)

Govinda Swamy Construction (BID ID -3143594)