Odugathur Tp-Iyothe thass Pandithar Scheme 2025-2026 Ward No.2 Childrens Playground

Amount

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders, excluding hard rock requiring blasting, etc. complete. complying with std. specifications.SS 20 B TNDSS No 23 & 24VI(S2) VII 9,10

Cement Concrete 1:4:8 Mix (one cement, four sand and Eight aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site, labour charges for mixing. Laying and curing, finishing, etc. complete. Complying with standard specifications.TNDSS NO 28 V, VI(S2) V, VI(S5A) VII

Supplying fabricating and placing in position of TMT steel rods including cost of binding wire, cost of all labour charges for fabrication and placing in position etc. Complete. Complying with std. specifications. TNDSS No, 97 V,VI (S6) VII (S6) VII-3

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.29mm height for plane surfaces in all floors with cross bracings using mild steel sheets of size 30cm x 55cm and 10 gauge stiffened welded with mild steel sheets of size 25mm x 25mm x 3mm for boarding and laid over silver oak (country wood). Joists of size 10cm x 6.5 cm dia spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at 75cm centre to centre etc complete complying with standard specification TNDSS No. 30 &86

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm ISS hard broken granite metal including cost and conveyance of all materials to work site and all labour charges etc., for mixing laying , consolidating,levelling and curring etc., complete Complying with Standard Specification as per TNDSS No.30,V,VI,S2,(SSA),VII

Reinforced Cement Concrete 1:1½:3 Mix (One cement, one and half sand and three aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, labour charges for mixing. Laying and curing, finishing, etc. complete. Complying with standard specifications(TNDSS No.30 V,VI (S3) VII-3

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification

Collection and supply of M sand from approved quarrry and filling the same in layer by layer each layer not exeeding 15mm thick, including cost and conveyance of gravel to site, laboure charges for filling, watering, ramming, etc. Complete as per Standard specification etc. complete.

Plastering in Cement Mortor 1:4 Mix (one Cement, four part of P Sand ) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications-10 m2.

Supplying and Fixing grillgate in position at necessary chicken mesh, Shuttering, Laying , Finishing etc., Complete as per std., Specifications.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification.